液压成型用英语怎么说,液压成型的英文翻译


词语导航

基本信息

词语:液压成型

繁体:液壓成型

拼音:yè yā chéng xíng

英语翻译

【化】 hydroform

分词翻译

液的英语翻译:

fluid; liquid; succus
【化】 liquor
【医】 Fl.; fld.; Fluid; humor; juice; Liq.; sap; succi; succus

压成的英语翻译:

【机】 print

型的英语翻译:

model; mould; type
【医】 form; habit; habitus; pattern; series; Ty.; type
【经】 type

翻译例句

1. 管件使用液压成型管之考量设计,可以兼顾美观及提高车架之刚性。

The tubes uses Hydro-forming to design, May give dual attention artistic and enhances rigidity of the frame.

2. 本实用新型涉及一种液压成型机械设备,具体为一种钢圈轮辋滚 型机。

The utility model relates to a hydraulic shaping mechanism device, in particular to a steel ring wheel felloe roll forming machine.

3. 仿真与试验分析表明,内压加载和轴向进给匹配关系的优劣是零件液压成型的关键;

The simulation and test analysis show that advantages and disadvantages of the matching correlation between internal pressure loading and axial feeding is critical in components hydroforming;

4. 介绍了液压成型技术的优点、现状及其工艺特点,以某汽车仪表板梁液压成型为例建立了有限元模型。

Firstly, advantages, application status and technological traits of tube hydroforming technology are introduced in this paper, and FEM models of instrument panel beam hydroforming are built.

5. 由于是液压成型而不是冲压的,304L不锈钢sfx泵具有焊接部件、锈点和潜在泄漏途径都较少的真正涡壳。

The 304l stainless steel SFX pump has a true volute with fewer welded parts, fewer rust points, and fewer potential leak paths because it is hydraulically formed rather than stamped.

6. 成型处理运营商可能需要完成液压,气动和电子系统课程。

Completion of courses in hydraulics, pneumatics and electronics systems may be required for moulding process operators.

7. 本文介绍了应用于再造大理石成型机的液压激振系统,并提出了应用转间控制的系统其振动参数的合理选择方法。

This paper introduces hydraulic vibration-exciting system for marble moulding machine, and pats forward rational selection method of vibration. parameter for the system controlled by rotary valve.

8. 本文针对XS—ZY—125型塑料注射成型机,分析了现行通用的双联泵供油液压系统耗能大的原因。

The paper analyzes the reason for more power consumption of conventional dual vane pump system set in model XS—ZY—125 plastic injection forming machines.

9. 介绍了彩虹金属屋顶成型机的构成、工作原理,通过系统原理图介绍了液压驱动系统的组成、工作原理及特点。Www.weNtIYI.COM

The paper introduces the composition and the working axiom of rainbow metal roof"s make-up machine, and the working axiom of the hydraulic system.

10. 该机主要由被动装料架、整平装置、冲孔装置、成型后切断装置、液压站、电脑控制系统等。

This machine is mainly composed of passive loading frame, after molding, leveling device, punching device, cutting device, hydraulic station, computer control system, etc.

11. 即采用液压马达和齿轮机构实现机动旋转螺纹脱模,同时采用组合型芯结构实现螺纹和加强筋的成型。

In the mould, hydraulic pressure motor and gear is applied to realize demolding tread thimble, and combinated core is used for the forming of tread and reinforcing tendon.

12. 与压缩成型,但是,传递模塑包括取暖的塑料流体之前得到国家的模具,并迫使它变成一个封闭的模具采用液压驱动柱塞。

Unlike compression molding, however, transfer molding includes heating the plastic to a fluid state before it gets to the mold and forcing it into a closed mold using a hydraulically actuated plunger.

13. 传统的模具结构是采用模压成型后机外利用专用液压机装备拉开模套,取出集电环制件。

Traditional mold structure removes the set ring work piece after molding machine used outside special hydraulic machine equipped with pull model kit.

14. 一次成型是配一台液压机及一套成型模具,切角、拉伸一次完成。

One is equipped with a hydraulic molding machine and a mold, cut, stretch again to complete.

15. 脱硫石膏压球机——液压部分:起着保证成型压力大小的功效。

Desulfurization gypsum pressure ball machine - hydraulic parts: molding pressure size plays a guarantee of efficacy.

16. 液压传动具有工作平稳、易于实现自动控制的优点,因此橡胶注射成型机采用液压传动作为动力源。

Because hydraulic drive was even and easy to control, it was applied in rubber injection molding machines as power source.

17. 介绍了柱塞式液压泵塑料壳体注塑成型模具的结构设计和工作原理,该模具具有简单合理、动作可靠等特点。

Structural design and operational principle of molds for plastics piston pump housings are presented. The mold presents itself as a simple and rational piece of design work.

18. 介绍了在普通压力机上进行闭合成型的模具结构及其工作过程,并介绍了液压系统以及液压参数的确定。

The structure and the working process of the die for closed forming on the common press were introduced. And the hydraulic system and the determination of the hydraulic parameters were stated.

19. 依据最优方案成型的Y型密封圈其缺陷得以消除,符合水介质单体液压支柱对密封元件的要求。

With the optimal project, the defects of Y-type seal-ring were eliminated. As a result, the Y-type seal-ring can satisfy the seal requirement of hydraulic prop with water medium.

20. 有凸轮式金属成型机与液压式金属成型机两种。

There are two models: Cam Type and Hydraulic Type.

21. 主要设备:零部件注塑成型机、烘干、粉碎设备;液压机床,数控车床;剪板机;拆边机;冲床;喷塑设备,酸洗设备;

Capital equipment: specialized production equipment such as gush outing machine, description machine, and large-scale moulding plastics machine, puncher, drying-machine, pulverizer, etc.

22. 主要设备:零部件注塑成型机、烘干、粉碎设备;液压机床,数控车床;剪板机;拆边机;冲床;喷塑设备,酸洗设备;

Capital equipment: specialized production equipment such as gush outing machine, description machine, and large-scale moulding plastics machine, puncher, drying-machine, pulverizer, etc.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!