
词语导航
基本信息
词语:加工工序
繁体:加工工序
拼音:jiā gōng gōng xù
英语翻译
【化】 manufacturing procedure
分词翻译
加工的英语翻译:
machining; process
【化】 processing
【医】 elaborate; elaboration
【经】 extra work; process; processing; transform
工序的英语翻译:
working procedure
【经】 operations; sequence
翻译例句
1. 虽然小,这部分需要一些不同的加工工序。
Though small, this part required a number of different machining operations.
2. 介绍数控车削加工工序设计的内容、步骤和方法。
This paper introduce the NC lathe turning operations design in the content, process, means.
3. 这种传感器广泛用于各种精加工工序工件的测量…
This device is also used on grinding, super finishing, honing, milling, turning …
4. 我们认为这一经验公式不能适用于所有的加工工序。
We don"t suppose that this empirical formula is applicable to all machining operations.
5. 程序通常用来控制复杂的加工工序,并有工程师编写。
Thee program can often control complex sequencing and is often written by engineers.
6. 可一次装夹可以完成钻孔、铣削、倒角、刚性攻丝等加工工序。
A clamping can be completed drilling, milling, chamfering, rigid tapping and other processing processes.
7. 最普通的精加工工序是用机械的方法,如研磨,磨削或用磨料。
The most common finishing operations are mechanical, such as milling, grinding, or polishing with abrasives.
8. 一个好的设计要考虑到加工工序是否容易进行及工程如何掌握问题。
Good design also takes into account if the machining operations will be easily performed and how the work is held.
9. 钢材经精密温锻后,可以显著提高其综合机械性能,减少加工工序。
The distinct advantages of precision warm forged steel are the improvement of mechanical properties and the simplification of fabricating process.
10. 钢结构件制造中,预留合理的焊接收缩量,可减少不必要的加工工序。
Provided that the reasonable welding shrinkage allowance is reserved during the manufacture of steel structure products, the unnecessary machining procedure can be avoided.
11. 按照大型舰船用螺旋桨的数控加工工艺要求,制定了叶片的加工工序。
By the machining process planning, the machining working procedure of propeller blade is come true.
12. 轴承的制造一般要经过锻造、热处理、车削、磨削和装配等多道加工工序。
The manufacture of bearings in general has to go through forging, heat treatment, turning, grinding and assembly processes such as multi-channel processing.
13. 以牛骨、菠萝、番茄为主要原料,经过一系列加工工序制成一种复合汁饮料。
A mixed juice drink was prepared from cattle bone, pineapple and tomato through a series of processes.
14. 每个成品的活塞杆,前后都需要经过研磨、电镀、抛光……等多道加工工序。wWw.wENtiYI.cOm
Each end of the piston rod, before and after the need to go through grinding, electroplating, polishing... and other multi-channel processing.
15. 分电器轴的加工精度要求较高,传统的轴下料加工工序不能满足其工艺要求。
The traditional process step of maching shaft material cannot conform to the technical requirements, because of the higher precision required by distributor shaft.
16. 在进行放电(电火花)加工后,表面硬度不会增高,可简化其后的加工工序。
Surface hardness will not be increased after the EDM process which simplifies the following machining procedures.
17. 这一项目投资额低、加工工序简捷、生产过程绿色,是我国的一项独创性成果。
The project investment is low, green machining process is simple, the production process, is one of our original achievements.
18. 目前已具备机械加工工序较为完整的生产能力,能满足不同用户对机械加工件的要求。
Now have more complete machining processes of production capacity, to meet the needs of different user parts machining requirements.
19. 目前已具备机械加工工序较为完整的生产能力,能满足不同用户对机械加工件的要求。
At present, machining processes have been more comprehensive production capacity to meet the needs of different users of the machine parts.
20. 其中影响成品轴承质量的热处理和磨削加工工序,往往与轴承的失效有着更直接的关系。
Which affect the finished product bearing the quality of heat treatment and grinding processes, often associated with bearing failures have a more direct relationship.
21. 税则归类改变不能反映实质性改变的,以从价百分比、制造或者加工工序等为补充标准。
If the change of tariff classification does not show substantive change, it takes AD valorem percentage, production or processing procedures as replenished standard.
22. 并以飞机机轮刹车盘为例,对该材料主要机加工工序(车削加工、钻削加工)进行工艺探讨。
Then air plane wheel brake discs as example, the main machining process of this material including turning and drilling is discussed.
23. 分析研究轴承磨加工工序所用的切削液,并选出新型环保导电聚苯胺水性防锈切削液进行试验。
Through analysis and research on cutting fluid used by the bearing grinding process, new environment protection conducting polyaniline water-based antirust cutting fluid is selected.
24. 减少了焊接h型钢用料的加工工序,节省了工时,降低了成本,取得了较好的经济效益和社会效益。
The processing procedure of welding H-type steel is decreased, the work time saved and the cost reduced. The good economic and social benefit are obtained.
25. 本制备系统对光纤光栅复合材料智能筋的加工工序简单、埋入效果优良,同时能够连续生产该材料。
The preparation system has simple processing process and good embedding effect of the fiber grating composite material intelligent rib and can also continuously produce the material.
26. 在研究冲压工艺加工需求和加工工序的基础上,应用多色集合理论建立了冲压工艺规划的数学模型。
Based on study of punching process requirements and processing sequence, the polychromatic sets theory was applied to construct the mathematical model of punching process planning.
27. 因此,该神经网络是处理高维问题的有效工具,尤其适用于包含多道加工工序的大工业过程的建模。
Thus the proposed neural network is a powerful tool for solving high-dimension problems, especially for modeling large-scale industrial processes with several work procedures.
28. 适用于铝合金型材,工业铝材,有色金属以及轻型钢结构型材的安装孔,流水槽,锁孔等的加工工序;
The machine is designed for processing launder, milling and mounting hole, lock hole in the aluminum profile and other industry aluminum materials.
29. 随着加工工序的增多,浆料及染料中的有害元素不断地在织物上沉积,致使坯布、印染布上有害元素的含量增加。
Since harmful elements in size, pastes and dyestuffs are deposited on fabrics, so that the harmful elements contents of grey and dyed fabrics are increased.
30. 随着加工工序的增多,浆料及染料中的有害元素不断地在织物上沉积,致使坯布、印染布上有害元素的含量增加。
Since harmful elements in size, pastes and dyestuffs are deposited on fabrics, so that the harmful elements contents of grey and dyed fabrics are increased.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
