熔性用英语怎么说,熔性的英文翻译


词语导航

基本信息

词语:熔性

繁体:熔性

拼音:róng xìng

英语翻译

fusibility
【电】 fusibility

相关词条

1.meltingproperty  2.fluxibility  

分词翻译

熔的英语翻译:

fuse; melt; smelt

性的英语翻译:Www.WEnTiYI.COM

character; gender; nature; quality; sex
【医】 gam-; gamo-; geno-; sex

翻译例句

1. 此外,初步探讨了稀土对自熔性合金粉末的作用机理。

Besides the mechanism of rare earth on alloy powder was discussed mainly.

2. 先采用自熔性好的合金激光熔覆恢复尺寸,再用激光合金化强化表层。

Dimension was resumed by adopting good self - fluxing alloy laser welding technology, and then the surface was enhanced by laser alloying technology.

3. 水性、溶剂性、热熔性、紫外固化和反应性墨是目前主要的喷墨打印用墨。

Aqueous, oil solvent, hot melt, ultraviolet curable and reactive-based inks are currently used ink-jet inks.

4. 主要运用于热可熔性塑料的熔化与粘结(热封),:汽车车灯的面罩与灯体的焊接。

Mainly apply to the melt and bond (heat seal) of the thermoplastic material, eg: the welding of the auto lamp housing and body.

5. 主要制作BOPP、CPP、POF等热熔性材料,在边封制袋前的对折成型的设备。

Production of BOPP, CPP, POF hot-melt materials, side sealing bag in front of the fold forming device.

6. 制备了含稀土的铁基自熔合金并考察了这种自熔合金在氧-乙炔火焰喷焊过程中的自熔性。

Self fluxing iron base alloys containing rare earths have been prepared. The self fluxing performance of these alloys in oxygen acetylene flame spray welding has been observed in detail.

7. 研制成功了一种新型铜基自熔性合金粉末,在高强度钢基体上采用等离子喷焊工艺制备焊层。

A newly developed self fusion Cu-based Cu-Ni-Sn alloy powder and the PTA coating technology are described.

8. 针对农机刀具对耐磨性要求高的特点,研究了氩弧熔覆自熔性合金熔覆层在农机刀具上的应用。

In order to improve the abradability of carbon steel, the argon-arc clad Ni60A alloy experiments were conducted and its application for cutter of agricultural machinery was discussed.

9. 热压密封连接器是在聚酯膜上印刷导电线路后,涂覆一层分散有导电微粒并具有热熔性的胶粘层而组成。

The heat seal connector is made of coating layer that is consisted in conductive particulate dispersed in hot-melt adhesive on printed circuit polyester film.

10. 底座封闭于槽孔,其顶面中央设有供掣动件及抗扭弹簧套设的凸轴,并设有供以热熔性固着剂固定钢珠的穿孔;

The center of the braking piece is provided with the through hole which is sheathed on the convex shaft and the top face is provided with an upright shifting piece.

11. 因此,被广泛应用于压敏胶粘剂、热熔性胶粘剂、交通路标漆、橡胶增粘剂、涂料、印刷油墨、纸张的疏水剂等。

So it is widely applied to pressure-sensitive adhesive, hot-melt adhesive, traffic paint, viscosity increaser for rubber, printing ink, hydrophobic agent for paper etc.

12. 利用等离子弧对低碳钢表面预涂的铁基自熔性合金粉末进行了熔覆处理,并对熔覆层的组织结构和性能进行了分析研究。

The self molten Fe base alloy powder on low carbon steel precoated sheet was melted by thermal plasma arc. The microstructure and hardness of the clad coating were analyzed.

13. 用普通电阻炉加石墨保护的方法成功地在铁素体基灰铸铁及珠光体基灰铸铁基体上制备了镍基自熔性合金粉末复合材料。

The thermal spraying process was used to obtain the composite coatings of nickelbased self fluxing alloy reinforced by buckytube on plain carbon steel substrate.

14. 热熔性道路标线涂料树脂是应用独特的配方和工艺流程,由脂松香及其它原料改性而成的一种专用于道路标线涂料的树脂。

Hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proceeding, which is specially used for road-marking paints.

15. 该发明提供了一种可熔性物质,可与任何或用来创建图像,也可作为一种无色液体使用前应用所有的彩色油墨结合或邮寄印刷。

The invention provides a fusible material that may be combined with any or all of the color inks used to create the image, or it may be used as a colorless fluid applied pre - or post-printing.

16. 耐熔性沥清基纤维经过碳化处理后,在一定温度下的CO_2气流中进行活化处理,得到的活性碳纤维具有良好的吸附性和再生性。

After carbonization, the high melting pitch-base carbon fibers are activated in CO2 atmosphere at certain temperatures. The activated fibers have good adsorbent function and regenerative behaviour.

17. 研究结果表明,在一定的工艺参数下,铁基自熔性合金粉末可以在钢的表面形成一层铺展均匀、结合牢固、具有零稀释率特点的熔覆层。

The results showed that a uniform, adherent and non dilution clad coating on low carbon steel was obtained under the proper cladding parameters.

18. 半湿物料粘壁主要与喷雾干燥塔结构、雾化器结构、安装、操作以及热风在塔内的运动状态有关。物料熔点低于干燥温度时容易产生热熔性粘壁。

The wall sticking of half wet material is concerned to the structure, fixing and operation of spray drying tower and sprayer, the motion of hot air in tower.

19. 我的亲属都安然无恙,但福岛第一核电站的灾难性熔毁又引发了新的担心,而这就发生在30英里之外。

My relatives are unharmed, but there are new fears of a catastrophic meltdown at the Fukushima Daiichi nuclear power plant, just 30 miles away.

20. 内阁官房长官枝野幸男指出,并不能排除核电站内所有三个有问题的反应堆炉心熔毁的可能性。

Chief Cabinet Secretary Yukio Edano said he was not ruling out the possibility of a meltdown at all three troubled reactors at the plant.

21. 问题在于争论选择产生每日产生积累的污染的燃煤还是小概率但是带来悲剧性结果的核反应堆熔毁。

The question boils down to the accumulating impacts of daily incremental pollution from burning coal or the small risk but catastrophic consequences of even one nuclear meltdown.

22. 高放射性废料是最危险的,因为它能熔穿容器,而且放射性强到在它旁边的人只需几天就有致命危险。

High-level waste is the most dangerous because it can melt through containers and is so radioactive it would be fatal if someone was near it for a few days.

23. 基性熔体的下垫作用是地壳生长的一种重要方式,并且代表了一种有效的幔向壳的物质与能量迁移。

Underplating of basic melt beneath the crust is one of the most important patterns of crust growth and represents an effective material and energy transfer from the mantle to the crust.

24. 平板模具受筒式电热管加热,这种电热管安装在精选的钻孔中,以避免所在的热熔点影响熔体流动的均匀性。

Flat sheet dies are heated with electrical resistance cartridge heaters placed in holes drilled in areas carefully selected so as to avoid localized hot spots which would affect melt flow uniformity.

25. 混凝土混合物致密、高流动性,使用灰色水泥和熔渣来获得浅灰色装饰,并且满足LEED标准。

The concrete mix was a dense, high fluid self-consolidating mix, using grey cement and slag to achieve a light grey finish and meet LEED standards.

26. 假如乏燃料池真的发生堆芯熔毁的话,那么放射性物质将直接外泄,而堆芯燃料似乎已经熔毁了。

So if that does indeed begin to melt down, which it seems it may have already done, that radiation would be released directly.

27. 假如乏燃料池真的发生堆芯熔毁的话,那么放射性物质将直接外泄,而堆芯燃料似乎已经熔毁了。

So if that does indeed begin to melt down, which it seems it may have already done, that radiation would be released directly.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!