催化裂化油用英语怎么说,催化裂化油的英文翻译


词语导航

基本信息

词语:催化裂化油

繁体:催化裂化油

拼音:cuī huà liè huà yóu

英语翻译

【建】 cycle oil

分词翻译

催化裂化的英语翻译:

【化】 catalytic cracking

油的英语翻译:

paint; fat; grease; oil
【化】 oil
【医】 elaeo-; eleo-; oil; Ol; olea; oleo-; oleum

翻译例句

1. 对催化裂化油浆萃取分离所得抽提油进行利用研究。

The utilization of the extract oil from extraction and separation of FCC is studied.

2. 讨论了不同催化原料油组成情况及其对催化裂化反应的影响。

The effects of the compost ions of different catalytic stocks on catalytic cracking reaction was discussed.

3. 根据超短接触时间催化裂化工艺的特点,开发了具有新型原料雾化和剂、油接触方式的下行式反应器。

A newly down flow reactor with new ways of feed atomization and oil catalyst contact was developed according to the characteristic of ultra short contact time catalytic cracking process.

4. 通过实验证明,KT液溶剂精制工艺能生产出橡胶用油,其副产物抽余油可作为催化裂化原料。

Tests show that rubber oil can be obtained with KT solvent refining, and the by-product can be used as catalytic cracking stock.

5. 探讨了以减压瓦斯油掺炼部分焦化蜡油为进料时催化剂组成及性能对催化裂化产品分布等的影响。

The effects of catalyst composition and properties on yield distribution of catalytic cracking of coker gas oil containing feedstocks were studied.

6. 与催化裂化重质芳烃原料相比,未反应芳烃油显示了较好的安定性。

The unreacted aromatic oils separated from the reaction mixtures exhibited better color stability in comparison with the catalytic cracking heavy aromatics.

7. 为改善催化裂化原料油雾化状况,降低结焦和干气收率,将原料重油进行乳化。

To improve the heavy oil atomization situation of FCC feed stock and decrease the yield of carbon and dry gas, the feed stock, heavy oil, is emulsified.

8. 结果表明,加氢尾油的馏分不适宜作为裂解原料,可以作为催化裂化的原料。

The results show that fractions of the hydrogenation residue are suitable for catalyzed cracking materials instead of cracking materials.

9. 讨论了不同催化原料油组成情况及其对催化裂化反应的影响。

The effects of the compostion sof different catalytic stocks on catalytic cracking reaction was discussed.

10. 加氢尾油可作为优质的催化裂化或加氢裂化掺炼原料。

The hydrogenation tail oil obtained from process could be used as superior FCC or hydrocracking feedstock.

11. 催化裂化是重质油轻质化的一个主要炼油工艺,是石油加工工业的标志和支柱。

Catalytic cracking is a main oil refining technique of making heavy oil lighter, and the mark and pillar of oil refining industry.

12. 以三种轻燃料油为反应原料,在实验室固定流化床反应器上用工业平衡催化剂进行催化裂化反应。

Three kinds of light oil were cracked as feedstocks on regenerated zeolite catalysts in a laboratorial fixed fluidized bed reactor.

13. 而且在反应温度和空速越低、剂油比越大、反应时间越长的条件下,催化裂化反应受干气比率的影响越明显。

The impact of dry gas on FCC reaction becomes increasingly pronounced with lower reactor temperature and lower hourly space velocity, greater catalyst to oil ratio and longer reaction time.

14. 介绍了渣油溶剂脱沥青-脱油沥青气化-脱沥青油催化裂化组合工艺的研究及应用情况。

The article introduces research and application situation of solvent deasphalting-deoiling asphalt gasification-deasphalting oil FCC group technology.

15. 介绍了在原料中加入聚合高分子活性添加剂以提高催化裂化轻质油收率、降低焦炭产率(即强化催化裂化反应过程)的机理。

Mechanisms to enhance FCC light oil yield and to lower the coke yield(i. e. strengthening FCC process) by adding polymeric active additives in the feedstock were introduced.

16. 作者选用催化原料油—减压蜡油为萃取剂,对催化裂化含酚废水进行脱酚预处理。

FCC raw material oil-decompressed wax oil is used as extraction agent to pretreat FCC phenol-bearing wastewater.

17. 通过实验证明,糠醛精制和KT液溶剂精制两种工艺均能生产橡胶用油,其副产物抽余油可作为催化裂化原料。

Tests show that rubber oil can be obtained with both furfural refining and KT liquid solvent refining, and the by-product can be used as catalytic cracking stock.

18. 评价方法可用于评价催化裂化金属钝化剂的钝化性能、产品质量、对原料油的适应性,以及确定钝化剂的最佳加入量。WWw.WENtiyI.cOM

The method can be used to evaluate the passivability, the product quality, the adaptability to various feedstock of metal passivator, and to determine the optimal additives dosage.

19. 通过常压重油加氢处理或减压渣油加氢处理工艺将劣质的常压重油或减压渣油加工成适用于重油催化裂化装置的原料油,从而最大限度地获得更多的轻质燃料油。

Through hydrotreating, the poor-quality long residue or short residue from CDU can be up-graded in-to good feedstock for heavy oil FCCU. Therefore, the production of light fuel oil can be maximized.

20. 通过对页岩油氧化、络合,脱出原料油中的碱氮成分和降低总氮含量,从而满足页岩油进行催化裂化的进料要求。

In order to meet the feed requirements for FCC, shale oil was treated by oxidation and complexation, to extrude the basic nitrogen components and to reduce the total nitrogen content of shale oil.

21. 该方法应用于催化裂化十集总动力学模型轻循环油反应网络动力学参数估计,降低了搜索算法对初值和实验误差的要求,保证了收敛稳定性。

The new method not only lowered the requirements to initial values, but also insured the convergence stability in using it to predict the parameters of the rate consta…

22. 该方法应用于催化裂化十集总动力学模型轻循环油反应网络动力学参数估计,降低了搜索算法对初值和实验误差的要求,保证了收敛稳定性。

The new method not only lowered the requirements to initial values, but also insured the convergence stability in using it to predict the parameters of the rate consta…

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!