齿辊用英语怎么说,齿辊的英文翻译


词语导航

基本信息

词语:齿辊

繁体:齒輥

拼音:chǐ gǔn

英语翻译

【化】 gear roller

相关词条

1.gearroller  

分词翻译

齿的英语翻译:

tooth; tine
【医】 dens; dent-; dentes; denti-; dento-; odont-; odonto-

辊的英语翻译:

roller

翻译例句

1. 对齿辊破碎机,还应当除掉夹在齿牙间的木料。

For teeth roll crusher, still should remove caught in between teeth of wood.

2. 介绍了双齿辊破碎机的概况和齿形与辊齿布置设计情况。

This article introduced the double pin roll breaker"s survey and the tooth profile and the roller tooth arrangement design situation analysis briefly.

3. 介绍了堆焊齿辊用陶032高温耐磨合金堆焊焊剂的性能。

The properties of agglomerated flux Tao 032 which is used for hardfacing alloy layer with high temperature wear resistance was studied.

4. 据此,推导出一种适用双齿辊破碎站破碎功耗分析的随机模型。

Based on this, a stochastic model for analysis of energy consumption of a double roll crusher was deducted.

5. 双向耕耙犁刀齿辊液力驱动机构属于耕整地农具上的一个总成。

A hydraulic driving system for bidirectional plow rake cutting coulter tooth roll belongs to an assembly on the agricultural implement of plows and soil tillage.wwW.wEntIyi.Com

6. 两齿辊中间间隙在一定范围内可调节,能够严格控制出料粒度。

The clearance between two rolls is adjustable at given range for proper control of discharge size.

7. 介绍了PGC系列双齿辊破碎机齿辊结构不合理处,并提出改进措施。

This paper introduces cogged structure of PGC series double teeth roll crusher unreasonable structure puts forward improving ways.

8. 本发明涉及一种在造纸、人造板行业中用于原木剥皮的齿辊式剥皮机。

The invention relates to a toothed roll barker used for log barking in paper-making and man-made board industries.

9. 齿辊采用子母槽差速设计,从而对物料的水份没有任何要求,且不粘不堵。

Roll differential use of Picture-tank design, and thus there is no water on the material requirements, and the non-stick is not blocked.

10. 同时根据锰结核的破碎强度和物理化学特性确定了用齿辊破碎方式进行破碎的实验方法。

In addition, according to the crushing strength and physical, chemical properties of manganese nodule, the testing method for crushing using toothed roll crusher is established.

11. 为了提高破碎机的破碎能力,研制了一种新型高效齿辊式破碎机,介绍了该破碎机的工作原理、组成结构和技术特点。

A new double toothed roll crusher was studied base on the traditional crashers, and its work mechanism, structure and technique characteristics were introduced.

12. 2PGL高强力双齿辊破碎机投入运行以来,不仅满足了洗选工艺对粒度的要求,也提高了精煤产率,创造了较高的经济效益。

Using ZPGL high-strength double toothed roll breaker not only satisfied with size demand for washing processing, but also improve cleaning coal rate and creates higher economy benefit.

13. 采用有限单元法对轧辊辊齿的应力状态进行了研究,得出了不同结构参数对轧辊应力变化的影响。

The paper presents the research into the stress state of roller teeth using FEM (finite element method). The results show that different structure parameter causes a change in roll stress.

14. 着重论述了冷焊修补压榨辊崩齿的方案选定、焊条选择和工艺。

The choice of plan, welding rod and technology of mending the broken tooths of a roller are much discussed.

15. 叙述了辊锻工艺实质及其适用性,用辊锻成形工艺生产耙齿的优点。

The article has described substance and its applicability of roll forging technology, advantages producing harrowing tooth with roll forging forming technology.

16. 电动滚筒式驱动器类似于一个行星齿轮带有拓扑结构,而这个行星齿轮和齿圈都用辊作为它们的齿。

A roller drive has a topological structure similar to an epicyclic gearing, where both the planet gear and the ring gear have rollers as their teeth.

17. 另一个动力辊变速机构是:在所述从动齿轮介轴上还装有齿系传动轮,该齿系传动轮将运动副传递给上辊轴。

The other speed shifting mechanism is a shaft of the driven gear that is provided with a tooth driving wheel that puts the roll shaft in motion through transmission.

18. 研究表明,利用角向砂轮机对麻辊进行打磨并且利用高硬度小方坯来磨合麻辊辊齿,是一种消除低碳钢小方坯表面凹坑缺陷的有效方法。

The research indicates that grinding the dented roller with a portable angle grinder and making the roller run in with harder billet are effective to eliminate the pit d…

19. 并就刺针刺辊对纤维损伤小的机理进行了分析,提出齿条刺辊齿顶齿宽远大于刺针针尖直径,可能是齿条对纤维损伤较大的原因之一。

The analysis is done to the mechanism of the less damage of the pricker roller. Conclusion is made that the tooth width of the wire may be the cause of the more damage of the wire roller.

20. 提出了一种改进榨辊齿形并在齿顶弧面上堆焊碳化钨的方法及其加工工艺。

A method to improve the tooth shape of mill roller and adopt the built - up-welding with tungsten carbide on the curved surface of tooth apex has been introduced.

21. 压球机零件有中空轴、齿圈轮、小齿轮、辊皮、电机等。

Pressure ball machine parts have hollow shaft, wheel, small gear tooth circle, roller skin, motor, etc.

22. 磨 辊 齿经等离子弧表面淬火后硬化层的厚度约为0。

The depth of hardened layer after surface quenching was about 0.

23. 磨 辊 齿经等离子弧表面淬火后硬化层的厚度约为0。

The depth of hardened layer after surface quenching was about 0.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!