
词语导航
基本信息
词语:乳液聚合
繁体:乳液聚合
拼音:rǔ yè jù hé
英语翻译
【化】 emulsion polymerization
分词翻译
乳液的英语翻译:
latex
【化】 emulsion
【医】 galact-; galacta-; galacto-
聚合的英语翻译:
aggregation; converge; group; polymerization
【化】 polymerization
【医】 polymerism; polymerization; polymerize
翻译例句
1. 通过乳液聚合对淀粉胶改性研究。
Research the starch adhesive modification through emulsion polymerization.
2. 合成橡胶胶乳由乳液聚合制成。
Synthetic rubber latex is made by emulsion polymerization.
3. 成核机理和稳定性是无皂乳液聚合的关键。
The nucleation mechanisms and colloid stability are the key aspects of emulsifier free emulsion polymerization.
4. 当在低温下进行乳液聚合时需要加入抗冻剂。
Antifreeze agents are necessary in emulsion polymerizations carried out at low temperatures.
5. 最后简要介绍反相乳液聚合产品的应用领域。
Application field for products prepared by inverse emulsion polymerization was presented at last.
6. 通过乳液聚合,制备了聚丙烯酸酯纳米粒子。
The polyacrylate nano-particle has been prepared by use of emulsion polymerization technology.
7. 并与常规加热方式下的乳液聚合结果进行比较。
And the results were compared with those of conventional heating.
8. 发现乳液聚合试样的组成分布要比悬浮聚合为窄;
On the basis of these relations the melting endotherms can be converted to the composition distributions.
9. 无皂乳液聚合可用于制备单分散有或无功能性微球。
Emulsifier-free emulsion polymerization can be used to prepare monodisperse micro-spheres with and without functional groups.
10. 方法:采用无皂乳液聚合法合成三元共聚荧光微球。
METHODS: the ternary fluorescent copolymer microspheres were synthesized by means of emulsifier-free emulsion polymerization.
11. 采用乳液聚合法合成自交联型丙烯酸酯类印花粘合剂。
The self-crosslinking acrylate printing adhesive was synthesized by emulsion polymerization.
12. 在超浓乳液聚合中,保持其稳定是完成聚合的关键因素。
The key factor of the concentrated emulsion is the stability.
13. 结果表明:4VP/BA的无皂乳液聚合遵循均相成核机理。
The results indicate that the soapless emulsion polymerization of 4VP/BA followed homogeneous nucleation mechanism.
14. 讨论了聚氨酯用量对丙烯酸甲酯乳液聚合及其膜性能的影响。
The properties of the emulsion and the film cast from the emulsion were studied.
15. 将这些单体与丙烯酸丁酯共聚得到了三种乳液聚合型品红成色剂。
Three latex magenta couplers were formed by emulsion copolymerization of these monomers and butyl acrylate.
16. 采用无皂乳液聚合法制备了具有单分散性的微米级聚苯乙烯微球。
The monodisperse micron-size polystyrene particles were prepared by emulsifier-free emulsion polymerization.wWW.WenTiYI.Com
17. 研究了硫调型氯丁橡胶乳液聚合中转化率对产晶结构与性能的影响。
The effects of monomer conversion on the structure and properties of the products in emulsion polymerization of sulfur modified neoprene were investigated.
18. 2是乙烯类单体经乳液聚合,并加入助剂复配而成,用于喷涂消光。
DM-2, an ethylene component co - compounded by polymerization of emulsion and the addition of auxiliaries, is employed in matting sprays.
19. 用核-壳乳液聚合方法制备了室温成膜低voc丙烯酸类上光涂料。
A room temperature film formation and low VOC acrylic finishing coatings has been prepared by core-shell structure emulsion polymerization.
20. MBS是由丁苯橡胶与甲基丙烯酸甲酯经乳液聚合而得的接技聚合物。
MBS is graft polymers prepared by polymerization of MMA in presence of PBD-styrene rubber emulsion.
21. 通过多步复合乳液聚合方法合成了一种具有核壳结构的刚性聚合物微球。
A kind of rigid polymer microsphere with core shell structure was synthesized by multi step composite emulsion polymerization technique.
22. 采用乳液聚合法制备了聚苯乙烯(PS)微球,对制备条件进行了研究。
In this paper, polystyrene microspheres were synthesized by emulsion polymerization method. The preparation conditions of PS microspheres were discussed.
23. 以硅氧烷、丙烯酸乙酯为原料,经乳液聚合制备了有机硅-丙烯酸酯共聚物。
The silicone-acrylate copolymer was synthesized using siloxane and ethyl acrylate by emulsion polymerization.
24. 提出了一种以浓乳液聚合直接浇注制备新型有机硅类渗透蒸发分离膜的新方法。
A novel method of pervaporation separation polysiloxane membrane prepared via concentrated emulsion polymerization was proposed in this paper.
25. 通过乳胶粒粒度分析及引发聚合速率的测定,探讨了微皂乳液聚合的成核机理。
The nucleation mechanism of the emulsifier-minor latex particles was discussed by measuring the particle size and the polymerization rate for the seeded stage.
26. 综述了引发剂种类和引发剂的选择,并对引发剂对乳液聚合的影响因素作了分析。
Kinds and choice of initiator were summarized up, and the effect of initiator on emulsion polymerization was analyzed in paper.
27. 用动态激光光散射法测定了丁二烯-苯乙烯乳液聚合的乳胶粒子的粒径及其分布。
The latex particles size and size distribution in emulsion copolymerization process of butadiene-styrene were determined by dynamic laser scattering.
28. 介绍了核壳乳液聚合工艺的概念、合成机理、合成方法、影响因素以及测试方法。
The concept, synthesis mechanism, preparation method and test measure of the core-shell emulsion, along with factors affected the performance were introduced.
29. 介绍了核壳乳液聚合工艺的概念、合成机理、合成方法、影响因素以及测试方法。
The concept, synthesis mechanism, preparation method and test measure of the core-shell emulsion, along with factors affected the performance were introduced.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
