底面的用英语怎么说，底面的的英文翻译

词语导航

基本信息

词语：底面的

繁体：底面的

拼音：dǐ miàn de

英语翻译

【医】 basilad

分词翻译

底面的英语翻译：

underside
【化】 back surface

翻译例句

1. 这些东西的和必须是底面的面积。

The sum of this figure must be the area of a base.www.weNtIYi.coM

2. 底面的吸盘作用和嘴一样。

The disks on the underside act as mouths.

3. 上述底板支架由以下部分构成，即形成了底面的支架底板；

The frame holder comprises the following parts: the holder frame with underside;

4. 空间的墙壁覆盖垂直木板，它是对倾斜的天花板底面的延伸。

The walls of this space are clad in vertical wooden boards that extend over the underside of a sloping ceiling.

5. 将凹部底面的颜色设定成比板表面(18)颜色的相对亮度低。

The color of the bottom surfaces of the recesses is set to brightness relatively lower than the brightness of the color of a board surface (18).

6. 其中，椭球曲面与底面的最大垂直间距大于接合面的最大高度。

The maximal vertical space between the ellipsoidal curved surface and the bottom surface is larger than the maximal height of the junction surface.

7. 黏覆于该隔温层底面的黏胶薄膜，该黏胶薄膜外部被覆一层离形纸；

A viscose thin film affixed to the bottom surface of the thermo-insulated layer is covered with a split shape paper.

8. 最简单的就是放在书店货柜上的书也要根据印在书本底面的目录分类摆放。

Even something as simple as where to shelve it in a bookstore depended on having a category to print on the back cover.

9. 夹具课程设计体会由于工件的孔17和14都要以底面做为基准加工，故首先得做出底面的加工夹具。

Because the bore of the work piece 17 and 14 all want to face to be used as the basis to process with the bottom, past have to do a bottom to face first of process the tongs.

10. 在设计强夯加固地基工艺时，应考虑到“极限影响范围”的存在，而该影响范围仅与夯锤底面的尺寸有关。

The existence of "the ultimate scope of influence" should be taken into account when designing the process of reinforcing a ground by the dynamic consolidation.

11. 本发明 的配备勺筷类收容结构的洗碗机包括由外壳框架和两端部结合在外壳框架上形成底面的收容架来构成的餐具架；

The dishwasher includes: the plate rack which is formed by the shell framework and the container which two ends are fixed on the shell framework and form the bottom;

12. 主要研究内容如下：1。采用非均匀B样条方法建立了叶片曲面的几何模型，并通过旋转叶片数据得到了流道底面的几何模型。

The main works are as follows:1. Build the blades" model using the algorithms of non-uniform B-spline surface, and build the channel"s model through rotating the long vane"s bottom boundary.

13. 这是机加工面与被称为后侧面的刀具底面夹角。

Clearance Angle. This is the Angle between the machined surface and the underside of the tool called the flank face.

14. 本机提供螺旋反转清料功能，使螺旋桨面的原料落回底面清料口处，便于清料操作。

This machine offers the function of reverse discharging, which enables the material on the screw to fall back to discharging exit on the bottom that is convent for discharging operation.

15. 减速机以底面法兰侧面的四条刻线对准台板划线进行找正。

The gear reducer is aligned based on 4 mark lines on sides of bottom flange and bedplate marks.

16. 减速机以底面法兰侧面的四条刻线对准台板划线进行找正。

The gear reducer is aligned based on 4 mark lines on sides of bottom flange and bedplate marks.