溶橡胶用英语怎么说,溶橡胶的英文翻译


词语导航

基本信息

词语:溶橡胶

繁体:溶橡膠

拼音:róng xiàng jiāo

英语翻译

【化】 sol rubber

分词翻译

溶的英语翻译:

dissolve

橡胶的英语翻译:

balata; rubber
【化】 rubber
【医】 gum-elastic; rubber
【经】 rubber

翻译例句

1. 通过改性剂的屏蔽作用,有效减缓和消除了甲醇对炉窑、内燃机橡胶塑料密封件的溶胀、脆化问题;

Through the shielding function of modifier, it effectively relieves and eliminates the swelling and embrittlement of methanol to the metal material of the grate and gas engine.

2. 在中试装置上合成出高乙烯基溶聚丁苯橡胶新牌号y 837v基础胶,并填充芳烃油。

The basic solution polymer on new brand (Y837V) of solution polymerized butadiene -styrene rubber was synthesized in the pilot plant, and filled aromatic oil.

3. 综述了国内外高乙烯基连续溶聚丁苯橡胶(SSBR)的研究现状及其聚合技术进展。

The research situation and the progress of continuous polymerization technology of home and abroad for high vinyl solution polymerized styrene butadiene rubber (SSBR) were reviewed in this paper.

4. 探讨炭黑种类及用量对天然橡胶(NR)和溶聚丁苯橡胶(s -SBR)硫化胶的耐屈挠破坏性及动态力学性能的影响。

The effects of kinds and dosage of carbon black on bending destroyed durability and dynamic properties of NR and S-SBR vulcanizates were discussed.

5. 本工作用甲苯作溶剂,乙醇作沉淀剂,用沉淀分级法,对溶聚丁苯橡胶(S-SBR)进行了分级。WWW.wEnTIyI.COM

Solution polymerized styrene-butadiene rubber ( S-SBR ) was fractionated by repeated precipitation method, using redistilled toluene as solvent and ethyl alcohol as precipitant.

6. 研究不同门尼粘度的集成橡胶(SIBR)混炼胶和硫化胶的各项性能,并与溶聚丁苯橡胶(SSBR1204)进行对比。

The effect of raw SIBR Mooney viscosity on the properties of mix and vulcanizate was investigated and compared to that of SSBR1204.

7. 研究了溶聚丁苯橡胶(s - SBR)装置湿溶剂精制塔的精制效果与不同因素之间的关系。

The relation between different factors and refining effects of moisture solvent refining column on S-SBR unit was investigated in this paper.

8. 介绍了溶聚丁苯橡胶(s ? SBR)在轮胎中的应用情况。

The application of s? SBR to the tire compound is introduced.

9. 本文主要研究了短纤维-氯丁橡胶复合材料的力学性能和耐热性能,并研究了其溶胀性能。

In this thesis, the physical and heat-aging properties of short fiber-CR composite were mainly studied, and the swelling properties of the composite were also studied.

10. 以丁苯橡胶基础配方为依据,研究了炭黑种类及用量、老化时间对溶聚丁苯橡胶T2000R和乳聚丁苯橡胶1502阿克隆磨耗和DIN磨耗性能的影响。

Based on the fundamental formula of SBR, the effects of carbon black types and dosage, the aging time on the Akron and DIN abrasion resistance of SSBRT2000R and ESBR1502 were studied, respectively.

11. 探讨国产溶聚丁苯橡胶(SSBR)T2530的基本性能。

The basic properties of domestic SSBR T2530 were investigated.

12. 分析了橡胶在二甲醚中溶胀的化学机理,并选出具有不同极性的橡胶材料进行耐二甲醚溶胀及溶胀前后拉断强度、拉断伸长率、硬度等力学性能的对比试验。

Chemical mechanism of rubber expansion in DME was analysed, and different rubber materials were selected to test the expansion, the tensile strength, the elongation at break, and the hardness.

13. 研究了O型丁腈橡胶密封圈中腈基含量对其耐润滑脂性能的影响,讨论了不同性能润滑脂对丁腈橡胶的溶胀作用机理。

The resistance to lubricating greases of some O-ring NBR seals was studied in this paper. The swelling of NBR in different lubricating greases were discussed.

14. 结果表明:橡胶在沥青中的溶胀在经过一个快速增长的过程后达到平衡,四组分分析实验证明了橡胶主要吸收沥青四组分中的轻质组分;

The results showed that swelling of rubber in asphalt went through a fast-growing process to achieve balance; SARA proved that rubber absorbed the light component in the asphalt.

15. 采用平衡溶胀法和粘度法分别测定了甲基乙烯基硅橡胶(MVQ)的溶解度参数。

The solubility parameter of methyl vinylsilicone rubber(MVQ) was determined with the equilibrium swelling method and the viscosity method respectively.

16. 水凝胶是一种具有三维网络结构的新型功能高分子材料,以其含水量高、溶胀快、柔软、具有橡胶般的粘稠性和良好的生物相容性等优点得到广泛应用及研究。

Hydrogel was moderate crosslinded, branched polymers, widely studied and applied because of the ability to absorb large quantities of water, swell quickly, soft, elastine and biologic consistence.

17. 探讨了硅橡胶模具发生膨胀的原因,指出其膨胀的本质是溶剂对硅橡胶的溶胀,并给出了减小溶胀的应对措施。

The reason of expansion of mould was swelling caused by solvent, the method of reducing such expansion was given.

18. 对溶聚丁苯橡胶(SSBR)进行了基本性能、工艺性能考核,并进行了在轮胎中的应用研究。

The basic properties and processibility of S SBR and its application to tire were investigated.

19. 对溶聚丁苯橡胶(SSBR)进行了基本性能、工艺性能考核,并进行了在轮胎中的应用研究。

The basic properties and processibility of S SBR and its application to tire were investigated.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!