金相试验用英语怎么说,金相试验的英文翻译


词语导航

基本信息

词语:金相试验

繁体:金相試驗

拼音:jīn xiāng shì yàn

英语翻译

【化】 metallographic test

相关词条

1.microscopictest  

分词翻译

金相的英语翻译:

【化】 metallographic phase

试验的英语翻译:

experiment; test; try; try on; try out; examination; experimentation; trial
trial run
【计】 breadboarding
【医】 probation; test; tria
【经】 test; trial

翻译例句

1. 本文用金相试验的方法对抗弹性能不同的铝合金靶板,作了弹坑解剖分析。

The crater analysis for Al-alloy targets of different ballistic properties by metallography is presented in this paper.WWW.wEnTiyI.com

2. 金相试验表明,适当降低轧制温度有利于晶粒的细化,从而改善钢材的力学性能。

Metallographic experiment indicate that reducing the rolling temperature properly is propitious to thin crystal, consequently the mechanical performance of steel products is also improved.

3. 用该仪器进行现场检测并通过金相试验对比,试验证明,用球化率测定仪比用测厚仪和探伤仪测得的声速值要精确,而且操作简单,可实现全过程自动控制。

It was approved by metallographic test that the sound velocity measured by the instrument was more accurate. The instrument was easy for operation and could be used to realize automatic control.

4. 采用化学分析、金相检验和显微硬度梯度试验等方法对油压机柱塞表面淬火交界处裂纹进行了分析。

The crack in quenching boundary of the hydraulic press plunger surface was analyzed by means of chemical composition analysis, microstructure examination and microhardness testing.

5. 采用低倍组织试验、化学成分分析及金相检验等方法,对出现边裂的带钢卷进行了解剖分析。

Structure testing in low magnificution, chemical composition analysis and microstructure examination were used to analyze the edge cracking of strip steel coil.

6. 对有裂纹的连铸板坯进行了高温塑性试验、低倍、金相组织和夹杂物分析。

The slabs with these cracks were analyzed by means of high temperature plasticity, macrostructure, microstructure and inclusion test.

7. 本文采用热酸浸蚀试验,化学成份分析和金相分析等手段,对45钢轴所出现的发纹进行分析。

The hair lines of 45 steel driving axle when quenching and tempering was analysed by heat etching, chemical analysis and metallographic.

8. 利用金相显微镜、X射线衍射仪、电子探针及滑动磨损试验机,研究了合金熔覆层的显微组织及性能。

The microstructure and properties of the composite coatings were investigated by optical microscopy, X-ray diffractometer, electron probe microanalyzer and a skimming wear machine.

9. 通过金相组织分析以及在不同参数下以锶变质对压铸铝合金性能带来的各种影响进行了试验。

Different influence of Sr modification with different parameters by analyzing metallographic structure on properties of die casting al alloy is studied.

10. 通过熔覆试验和金相组织分析,获得了最佳工艺参数。

The optimal technological parameter was obtained by laser cladding experiment and metallographic structure analysis.

11. 采用化学分析、金相分析以及扫描电镜分析等试验方法对某减震器连杆断口进行了分析。

The fracture of Piston rod of the absorber was analyzed by means of chemical composition analysis, microstructure examination and the scanning electron microscope (SEM).

12. 由此研制的疲劳试验装置,能够在金相级的水平上进行十分精细的疲劳试验。

The new testing system is capable of doing very fine fatigue tests on the metallographic level.

13. 还有完善的理化检验设备,金相显微镜、万能性试验机、台式硬度计。

There are sound physical and chemical inspection equipment, optical microscope, universal test machine, desktop sclerometer.

14. 利用彩色金相对过共晶和亚共晶球铁磨球五组试样进行了试验对比。

Five series ductile iron elements of hyper eutectic, hypo eutectic, eutectic have been tested using color metallograph method.

15. 对发生泄漏的不锈钢u型波纹管补偿器的宏观失效特征、微观失效特征、金相、腐蚀介质进行试验分析。

A test analysis is made on macro-failure and micro-failure characteristics, metallography and corrosion mediums of U-type stainless steel bellows type expansion joints leaked.

16. 通过硬度试验、冲击试验、断口扫描和金相组织观察,研究了T92钢焊接接头的韧性与组织的关系。

Through hardness test, impacting test, SEM of failure surface and microstructure observation, the relationship between the toughness and its microstructure of welding joint of T92 steel was studied.

17. 本文运用金相组织分析的手段,对具有可比性的反弯试验的三种热处理制度下的样品进行分析,展示了金相组织与反弯性能之间的联系。

The article analyses the samples under the three heat treatment systems of inflection test with comparability, and illustrates the relation between metallographic structure and inflection performance.

18. 利用MTS材料试验系统和光学金相、SEM、TEM等分析手段研究了镍基单晶高温合金CMSX—3的高温疲劳行为,重点探讨了循环频率对这种行为的影响。

The high temperature fatigue behaviour and the effect of cyclic frequency on the behaviour of CMSX-3 Nickel:based single crystal superalloy are investigated by MTS machine, metallograph, SEM and TEM.

19. 金相组织、扫描电子显微镜分析试验。

Metallographic structure, Scanning electron microscope analysis test.

20. 通过金相技术、力学性能试验和SEM技术研究了6061-T6铝合金真空电子束焊接接头的金相组织、力学性能和断口形貌特征。

The metallurgical structures, mechanical properties and fractographs of EB welded 6061-T6 aluminum alloy joint were studied by means of metallography, mechanical test and SEM technology.

21. 对铅黄铜作了深冷处理,并进行力学性能试验和金相组织分析。

The Pb brass has been treated with cryogenic treatment, the mechanical properties testing and microstructure analysis have been done.

22. 通过试验研究了刀具法向前角、拉屑力和拉屑角等对纤维横截面形状和金相组织的影响。

Based on the experiment, the influences of tool normal rake, chip pulling Angle and chip pulling force on the shape and metallurgical structure of the fiber cross section are studied.

23. 采用国产6005A铝合金进行焊接试验,并对焊接接头进行了力学性能检测及金相显微组织观察。

Welding test of extruded 6005a Aluminium alloy was performed and mechanical properties and optical Ancrostructures were studied.

24. 采用金相分析法,分析齿轮烧伤试件的齿面温度分布状态,结合成形磨削齿条的模拟试验,研究成形磨削烧伤形成机理及影响因素,提出了避免成形磨削烧伤的工艺措施。

The mechanism of profile grinding burn and its influencing factors are analysed through the simulated test of profile grinding racks, and the improvements of grinding burn are proposed simultaneously.

25. 由三种不同成分的拉伸试验结果与金相组织可知:一组成分的含钒量增加,晶粒细化,从而强度增大。

The testing results and their microstructure show that the one with a higher vanadium content and smaller crystal grain has a high strength.

26. 采用化学分析、力学性能试验和金相检验等方法对该裂纹进行了分析。结果表明,此缺陷是由于试验环原始表面的粗糙度过大造成的。

By means of chemical composition analysis, mechanical property test and microstructure examination, the results showed that this defect was result of rough surface and not the crack existed in matrix.

27. 研究了转炉托圈的焊接工艺,结合拉伸试验、冲击试验、断口和金相组织分析,进行了焊接工艺的评定。

The welding process of converter ring was studied. By means of tensile and impact test, fractures and microstructure analysis, the evaluation of the welding process was made.

28. 对间断焊焊接接头的金相分析表明其金相组织正常,内压试验结果表明该结构能安全运行。

The metallographic analysis shows that the metallurgical structure is proper. The results of internal pressure test indicate that the hot tap structure can work safely.

29. 获得了金相组织的变化,获取了试验后的硬化层深度和宽度。

Metallographic change is also researched. The hardened surface band depths as well as hardened surface band widths were obtained.

30. 获得了金相组织的变化,获取了试验后的硬化层深度和宽度。

Metallographic change is also researched. The hardened surface band depths as well as hardened surface band widths were obtained.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!