斜倾角用英语怎么说，斜倾角的英文翻译

词语导航

基本信息

词语：斜倾角

繁体：斜傾角

拼音：xié qīng jiǎo

英语翻译

【机】 angle of internal friction

分词翻译

斜的英语翻译：

inclined; oblique; slanting; tilted
【医】 plagio-; stropho-

倾角的英语翻译：

incidence; inclination; obliquity
【化】 angle of inclination; angle of tilt; inclination; oblique angle
【医】 dip

翻译例句

1. 目的：探讨多层螺旋CT (MSCT)最大强度投影(mip)测量肩胛孟斜倾角的价值。

Objective: To assess the value of maximum intensity projection (MIP) of multi slice spiral ct (MSCT) in measuring the scapula glenoid inclination Angle.

2. 如果倒转褶皱构造的两翼倾角相等，则可称这种特殊类型的倒转褶皱为等斜褶皱。

If both limbs of overturned fold have same dip Angle we call this special overturned fold isoclinal fold.

3. 斜刃剪切时，剪切力的大小与板料的宽度、厚度及斜刃倾角有关。

Shear force is interrelating with width and thickness of plate and obliquity of knife-edge.

4. 文摘：斜刃剪切时，剪切力的大小与板料的宽度、厚度及斜刃倾角有关。

Abstract: shear force is interrelating with width and thickness of plate and obliquity of knife-edge.

5. 利用偏心钻具在旋转过程中的离心力和偏心短钻铤的偏重带的支撑作用，减小了钻头轴线倾角，从而减少了井斜。

By taking advantage of rotating centrifugal force and the supporting effect of eccentric short drill collar, we cut off the axis inclination of bit, and avoid well inclination.

6. 重点介绍了胜利区块大倾角地层防斜技术的研究与应用情况。

The research and applications in high dip formation in Shengli Area are mainly introduced.

7. 综合分析了开采深度、煤层倾角、煤层开采厚度、工作面斜长等地质采矿条件对底板采动导水破坏带深度的影响。

This paper analyzed the influence of mining depth, coal seam dip, mining height and face length on depth of floor water-conductive fissure zone.

8. 河坝1井上部陆相地层属于高陡构造，地层倾角大，极易发生井斜。

The upper continental formations are high dip angle structures in Heba 1 Well.

9. 研究结果表明：设铰位置、铰的形式、斜腿倾角对该结构体系内力分布影响较大，须慎重选取。

The analysis shows that, the location of hinge, hinge form and inclination Angle of leg will greatly affect the internal force distribution of structure, which will be carefully treated.

10. 玉门油田青西区块地质情况复杂、地层倾角大、容易发生井斜，长期以来一直是提高钻井速度的一个瓶颈。

Due to complicated geology and high dip Angle, hole deviation is easy to take place in Qingxi area of Yu-men oilfield, it is the bottle-neck for improving penetration rate for a long period.

11. 研究中采用的边界元方法可以灵活应用于任意厚度，任意倾角的水下双斜板结构。WWW.WeNtiyi.com

The adopted boundary element method in the research can be flexibly applied to submerged double inclined plates with any thickness and any inclined Angle.

12. 测斜器，倾角计一种测量海拔、斜坡或倾斜的角度的测量仪器，如测路基倾斜度用。

Any of various surveying instruments for measuring angles of elevation, slope, or incline, as of an embankment.

13. 从岩石各向导性的本构方程出发，用有限单元法研究了地层倾角与定向钻井井斜之间的关系。

According to constitutive equations of rock anisot roipy, the relation between deviation of stratum and well inclination in directional drilling has been studied with the finite element method.

14. 本文介绍倾角计测斜系统在隧道稳定性临测中的应用例。

In this paper, a case history of the application of tiltmeter system to monitor the stability of tunnel is introduced.

15. 针对动能杆式弹大倾角斜撞击靶板产生的靶后破片，建立了其初始破片云数学描述模型，并在此基础上对斜撞击靶后破片特征分布进行了建模。

For the description of the debris behind oblique single plate target perforated by kinetic projectile, an initial armor debris cloud model has been proposed.

16. 斜仪是一种测定钻孔倾角和方位角的仪器。

Inclinometer is an Instrument testing drift Angle and azimuth of drift hole.

17. 斜板仪主要构件为一端铰接在一起的两块平板，试验中顶升上平板自由端，直到试块在斜板上滑动，并读出斜板倾角。

The essential components of tilt table device were two plates hinged together at one end. The upper plate, on which test sample was put, was continuously lifted at the free end till sample slided.

18. 大楼建筑外形就像是一只被扭曲的正方形油炸圈，总高度大约230米，就像两个倒“L”斜靠在一起；两座竖立的塔楼向内倾斜，倾角很大；

The building appearance of the building is just like a batter-fried prawn, Total height about 230, just as two pour " L " oblique to lean together;

19. 斜盘中心线和缸体中心线相交一个倾角δ。高压油经配油盘的窗口进入缸体的柱塞孔时，高压腔的柱塞被顶出，压在斜盘上。

High-pressure oil pan with oil as a window into the cylinder hole of the plunger, the high-pressure chamber was the top of the plunger, the pressure in the oblique plate.

20. 斜盘中心线和缸体中心线相交一个倾角δ。高压油经配油盘的窗口进入缸体的柱塞孔时，高压腔的柱塞被顶出，压在斜盘上。

High-pressure oil pan with oil as a window into the cylinder hole of the plunger, the high-pressure chamber was the top of the plunger, the pressure in the oblique plate.