刮涂用英语怎么说，刮涂的英文翻译

词语导航

基本信息

词语：刮涂

繁体：刮塗

拼音：guā tú

英语翻译

【化】 knife coating

分词翻译

刮的英语翻译：

blow; fleece; plunder; scrape; scratch
【医】 scraper

涂的英语翻译：

besmear; blot out; imbrue; scrawl; smear; spread
【医】 apply

翻译例句

1. 刮涂环氧石英粉腻子；

Trowelling epoxy crystal powder putty;

2. 刮涂是采用抹子、刮板或油灰刀刮补腻子的方法。

Blows spreads is USES the trowel, the scraper or the putty knife blows makes up the putty the method.

3. 第二遍涂层施工：在第一遍涂层基本固化后，再在其外观刮涂第二遍涂层，涂刮方法同第一遍涂层。

Second times the coating construction: in the first pass of the basic curing coating, and then scraping the surface of the coating second times, the coating method with the first coating.

4. 奈思威系列运动地板采用最新的压延和涂刮相结合的生产工艺，使得产品具有优异的性价比。

The combination of knife coating and calendaring technology in production process makes Niceway floor with excellent performance and price ratio.

5. 开始涂刮时，应根据施工面积大小、外形和用料，同一考虑施工退路和涂刮顺序。

Start scraping, construction should be based on the size, shape and material, to consider a unified retreat and scraping order construction.

6. 介绍农用运输车磷化、喷涂底漆、涂刮原子灰、喷涂聚氨酯磁漆等工艺流程及注意事项。

Application of polyurethane enamel on farmer trucks with key points in the processes of phosphating, priming, atomic ash puttying and enamel spraying is described.

7. 涂膜耐磨抗刮，耐酒精，能有效防止印图脱墨，并保持图案的鲜艳光亮。

The film is scratch resistant, alcohol resistant, and prevent from peeling off to maintain the print colorful.

8. 水性中涂封孔层： 选用荣扬水性中涂，加入适量石英粉，搅拌均匀后，施工方式为刮批。

Sealing aperture coating: Rongyang middle coating with suitable amount of quartz powder is used and constructed by shaving after even agitation.

9. 它既可以用专用喷涂设备喷涂施工，也可以用手工涂刮施工。

The paint can not only carry out spray construction by using special spraying equipment but also can carry out spray scraping construction by hands.

10. 分别测试了涂膜的耐黄变性、光泽、硬度、耐刮擦性能。

The non-yellowing, gloss, hardness, scribe resistance are tested.

11. 水性中涂腻子层： 选用荣扬水性中涂（可加入适量的粉），搅拌均匀后，施工方式为刮批。

Putty level: Rongyang thin coating with suitable amount of powder is used and constructed after even agitation.

12. 水性中涂腻子层： 选用荣扬水性中涂（可加入适量的粉），搅拌均匀后，施工方式为刮批。WWW.wEnTiYi.cOM

Putty level: Rongyang thin coating with suitable amount of powder is used and constructed after even agitation.