词语导航
基本信息
词语：聚硫醚
繁体：聚硫醚
拼音：jù liú mí
英语翻译
【化】 polyalkylene sulfide; polythiaether; polythioether
分词翻译
聚的英语翻译：
assemble; gather【建】 poly-
硫醚的英语翻译：
【化】 alkyl sulfide; sulfoether; thioether【医】 sulfur ether; thio ether; thio-ether
翻译例句
1. 用脱脂棉在碱存在下与环硫氯丙烷反应合成了一类交联的聚硫醚型离子交换纤维。
A new kind of polythioether type cotton fibers was synthesized by the reaction of cotton with chloromethylthiirane.
2. 用热重分析仪 （TGA）和动态应力流变仪 （DSR）分别测量了聚硫醚酰亚胺热聚合反应过程中转化率和粘度随时间的变化。
Thermogravimetry analysis(TGA) and Dynamic Stress Rheometer(DSR) were used to measure the conversion and viscosity changing with time during the thermopolymerization to form polythioetherimides.
3. 采用热分析的方法对高性能材料聚苯硫醚砜(PPSS)在氮气气氛和空气气氛中的热老化寿命进行了研究。
The thermal degradation of Poly (phenylene sulfide sulfone) (PPSS) was studied by thermogravimetric analysis in both nitrogen and air to determine the thermal lifetime.
4. 本文旨在探讨三聚氰胺对聚苯硫醚树脂的交联机理。
This paper approaches the effect of melamine on the cross-linking mechanism of polyphenylene sulfide resin.
5. 研究碳纤维布的含量、表面处理方法及填料等对聚苯硫醚复合材料性能的影响。
The influence of carbon fiber cloth content, different surface treating methods and filler on the properties of PPScomposite is studied.
6. 介质为聚酯、聚丙烯、聚苯硫醚薄膜等。
Medium for polyester, polypropylene, polyphenylene sulfide film and so on.
7. 聚苯硫醚是一种具有许多优良特性的工程塑料，其应用十分广泛。
Polyphenylene sulfide is a kind of engineering plastic with many excellent characters, and it "s used widely.
8. 加入聚苯硫醚（PPS）的PTFE基复合材料的损耗因子曲线只出现一个明显的峰，峰值变大；
The loss factor curve of PTFE/PPS appears only one peak, and the loss peak value increases.
9. 以聚笨硫醚(PPS)和聚酰亚胺(PI)为复合粘结剂与聚四氟乙烯(PTFE)混合于合适的溶剂中，制成含ptfe的涂料。
A coatings containing polytetrafluoroethylene (PTFE) was prepared with polyphenylene sulfide (PPS) and polyimide (PI) as adhesive which were mixed with PTFE in a suitable solvent.
10. 研究分析了聚苯硫醚的成形工艺。
This article researches and analyzes its manufacture process of PPS.
11. 碳纤维布经过表面处理后与聚苯硫醚的粘接强度大大提高，其中用丙酮浸泡的效果好于高温热处理；
After the carbon fiber"s surface treated, the interfacial adhesive strength of the composites increased greatly and the effect of treating with acetone is better than that with heat.
12. 研究了在高纯聚苯硫醚(PPS)树脂合成中，水量的变化对产品质量的影响。
The influence of water content on the quality of the product in the synthesis of Poly (phenylene sulfide) (PPS) with high purity was studied.
13. 采用TG- DSC联用技术对聚苯硫醚（PPS）纤维在N2氛围中的热分解行为进行分析。
The thermal decomposition behavior of PPS fibers was analyzed using TG-DSC coupling technology in N2.
14. 本文介绍了聚苯硫醚国内外最新进展。
This paper introduces new advance of poly(phenylene sulfide)(PPS).
15. 聚苯硫醚(PPS)纤维是一种具有优异的热稳定性、耐化学腐蚀性、阻燃性的高性能合成纤维。
Polyphenylene sulfide (PPS) fiber is a kind of high-performance synthetic fiber with excellent thermal stability, chemical resistance, flame retardancy.
16. 聚苯硫醚（PPS）是一种高性能的特种工程塑料，具有各种优异的性能。
Poly(phenylene sulfide) (PPS) is a high-performance engineering plastics with many excellent properties.
17. 电子设备用固定电容器。第20-1部分：空白详细规范：金属化聚苯硫醚膜介质直流片式固定电容器。评定水平EZ。
Fixed capacitors for use in electronic equipment - Part 20-1: Blank detail specification: Fixed metallized polyphenylene sulfide film dielectric chip d. c. capacitors. Assessment level EZ.
18. 介绍热成型聚苯硫醚(PPS)的性能特点、热成型PPS挤出成型片板材和片板材热成型设备的特点及成型工艺控制要点。
The properties of thermoforming PPS were introduced, thermoforming PPS extrusion sheet and it"s thermoforming equipments characteristics, key points of process control were also introduced as well.
19. 对聚苯硫醚(PPS)共混是材料获得更优性能和特殊新功能便捷有效的办法。
Polymer blending is an effective method to obtain PPS (polyphenylene sulfide) of superior properties and with some special functions.
20. 研究了喷涂工艺和碳化硅含量对聚苯硫醚复合涂层力学性能的影响。
The effects of paint-spraying process and silicon carbide(SiC)content on mechanical properties of polyphenylene sulfide (PPS) composite coating have been studied.
21. 简要介绍了聚苯硫醚(PPS)与其他聚合物进行共混改性的研究进展。www.wentIyi.cOM
It briefly introduced the research progress of the modification of polyphenylene sulfide (PPS) blended with other polymer.
22. 主要包括聚甲醛、聚酰胺、聚碳酸酯、ABS、聚苯醚、聚对苯二甲酸乙二酯、聚砜、聚醚砜、聚酰亚胺、聚苯硫醚等。
Include polyoxymethylene, polyamide, polycarbonate, ABS, polyphenylene oxide, polyethylene terephthalate, polysulfone, polyether sulfone, polyimide, polyphenylene sulfide and so on.
23. 通过聚苯硫醚（PPS）与大颗粒氧化镁（40~325目） 混合经双螺杆挤出机挤出造粒制备了导热绝缘塑料。
Thermal conductive insulating PPS plastics were made by extrusion compounding PPS with MgO particles of large particle sizeBF(40~325-mesh)BFQ.
24. 介绍聚苯硫醚的特性及其主要制备方法，对聚苯硫醚的应用进行了综述，并对其在造纸工业上应用作了展望。
In this paper, the characteristic of PPS and its production are described, the application of PPS is reviewed. Some desire for application of PPS in paper-making are proposed as well.
25. 本文采用正交试验设计法，成功地筛选出聚苯硫醚(PPS)泥浆干燥工艺参数。
This article studied dry process of PPS prepreg which is impregnated with slurry method through the use of orthogonal experiment method.
26. 着重阐述了聚苯硫醚纤维的制备及其共混改性的最新研究进展，并对国内外的研究现状进行了评述。
Moreover, the recent advance in the research of manufacturing techniques and blends modification of polyphenylene sulfide fiber are introduced in detail, and its present DE...
27. 对聚苯硫醚合成工艺进展、新品种研制开发及PPS合金作了叙述。
The progress in the synthesis technology, the development of new grades of product and PPS alloy were also described in this paper.
28. 对聚苯硫醚合成工艺进展、新品种研制开发及PPS合金作了叙述。
The progress in the synthesis technology, the development of new grades of product and PPS alloy were also described in this paper.
版权声明：问题易所有作品（图文、音视频）均来源网络，版权归原创作者所有，与本站立场无关，如不慎侵犯了你的权益，请联系我们告知，我们将做删除处理！