硼化物用英语怎么说,硼化物的英文翻译


词语导航

基本信息

词语:硼化物

繁体:硼化物

拼音:péng huà wù

英语翻译

boride
【医】 boride

分词翻译

硼的英语翻译:

boron
【医】 B; boro; boron

化物的英语翻译:

【医】 compound

翻译例句

1. 金属化合物有硼化物、硅化物、复合碳比物等。

Metallic compounds include boride, silicious and compound carbide, etc.

2. 当硼含量较高、冷却速度较慢时,硼化物存在于枝晶干。

When the boron content is high and the cooling rate is relatively low, boride can exist at the dendrite arm.

3. 研究采用铸渗法制备三元硼化物硬质合金覆层钢基材料。

The preparation of ternary boride hard alloy cladding layer on steel substrate is studied.

4. 研究了噻吩类型硫在金属硼化物上的原位还原深度脱硫。

The desulfurization over different metal borides and the choices of suitable nickel salt precursor and amount of reducing reagent were conducted.

5. 本文重点研究了这种针状硼化物的形成机理及其影响因素。

Otherwise, a kind of needle-shaped boride will appcar on the surface of specimen.

6. 一般选用结晶水较多的硼化物、锌化物及氢氧化铝、氢氧化镁。

Generally choose gesso more boron hydrates, zinc carbide and aluminum hydroxide, magnesium hydroxide.

7. 研究以硼化物为耐磨相的新型耐磨白口铸铁的组织特点与力学性能。

The microstructure and mechanical properties of a new type wear-resistant white cast iron with the boride as wear-resistant phase were investigated.

8. 探讨了热浸扩散渗铝复合渗硼中的硼化物的形成机理及硼的迁移机制。

The mechanism of both forming boride and transferring of boron in the aluminized and then boromized layer were discussed.

9. 其中活性硼原子对渗层生长速率的贡献大于气态硼化物分解的硼原子。

It is proved that the activated boron atoms decomposed by boriding medium are more than those decomposed by gaseous boride.

10. 同时,硼化物覆盖了表面酸中心,堵塞了孔道,因而提高了反应的选择性;

At the same time, boride thus formed covered the surface acid sites and blocked the pores and channels, leading to higher para-selectivity.

11. 精细陶瓷一般以氧化物、氮化物、硅化物、硼化物、碳化物等为主要原料。

The raw materials: break through the traditional boundaries of using clay as raw materials, fine ceramics" raw materials are generally oxides, nitrides, silicides, borides, carbides etc.

12. 按照各组分的重量百分比称取钛粉、稀土六硼化物、碳化硼、合金化元素;

It is prepared through mixing Ti powder, RE hexaboride, boron carbide and alloying elements;

13. 在真空烧结炉中通过原位反应液相烧结工艺制备出三元硼化物基金属陶瓷覆层。

Ternary boride based cermet cladding material was prepared by in situ reaction and liquid phase sintering technology in vacuum furnace.WwW.WENTIyI.Com

14. 硼、碳分别是决定硼化物和基体的重要元素,其含量对组织和性能起决定作用。

Boron and carbon are the important elements that can decide boride and matrix respectively, and their contents affect the microstructure and properties of the HBIA greatly.

15. 采用真空液相烧结法,在Q 235钢表面制备三元硼化物基金属陶瓷覆层材料。

A ternary boride cermet clad material was fabricated on the Q235 steel substrate by means of the vacuum liquid phase sintering technique.

16. 论述了不同制备方法中分别以碳化物和硼化物为增强相的钛基复合材料的微观组织。

Microstructures of carbide and boride reinforced respectively titanium alloy matrix composites by different fabrication methods were reviewed.

17. 电子显微镜观察与分析表明,晶界上的薄膜状硼化物是导致合金缺口敏感的主要原因。

Analysis and observation under electron microscope indicated that it seems to attribute the notch sensitivity of the alloy to the film-like boride along the grain boundaries substantially.

18. 反应硼化烧结法制备的三元复合硼化物基新型硬质合金,具有优良的物理、化学、力学性能。

New type cemented carbide of ternary complex boride base prepared by reaction boronizing sintering technique has excellent physical, chemical and mechanical properties.

19. 针对海卤水沉淀反应过程中氢氧化镁对硼化物的吸附现象以及树脂法对卤水脱硼进行了研究。

The removal of boron in brine was researched, in which magnesium hydroxide produced in seawater or brine and resin were adopted respectively.

20. 微波场下的渗硼层形成所需的硼原子来源于介质分解的活性硼原子和气态硼化物分解的硼原子。

The activated boron atoms come from the boron atoms which decomposed by boriding medium and gaseous boride.

21. 结果表明:在给定实验条件下,渗硼层组织致密,硼化物呈针齿状楔入基体,与基体结合牢固;

The results show that, in the given conditions, the microstructure of boronizing layer is dense, boride wedged base in the shape of spider, which combines with base firmly;

22. 使用硼化物、丙三醇和长链脂肪酸合成了一种油溶性含硼抗磨添加剂,测试了它的抗磨及防锈性能。

A new type of boron containing anti wear additive has been synthesized from boride, propanetriol and long carbon chain fatty acid.

23. 一些处理参数会导致在硼化物层上形成硼-碳层,它将起着扩散垒的作用,阻止了硼化物进一步的生长。

Some treatment parameters led to boron carbon coating above the boride layer which ACTS as a diffusion barrier and prevents a further growth of the boride layer.

24. 通过实验,建立了一整套低硼钢中固溶硼、碳硼化物、合金元素硼化物、氧化硼和氮化硼的分离、测定方法。

A entirely set of method to separate and determine solid solution boron, carbon boride, alloy elements boride, boron oxide and boron nitride in low boron steel is established.

25. 研究水平连续铸造方式下高磷含硼铸铁中磷共晶和硼化物的分布特点,并进行超耐磨性试验,对磨损试验后材料的微观形貌进行试验验证分析。

Study metallographic structure of phosphor eutectic and boride in continuous cast iron. The microstructure of piston has been analyzed and proved after wear test.

26. 考察了格氏试剂的溶剂、反应物盐酸吡啶和三溴化硼对脱甲氧基收率的影响。

The effects of solvent of Grignard reagent, pyridine hydrochloride and boron tribromide on yield of product were investigated.

27. 实验结果表明,硼加入促使碳化物产生了粗化和分枝,同时碳化物硬度明显提高。

Results showed that boron made the carbide coarsening and branching and its microhardness increasing.

28. 硼硅玻璃模制注射剂瓶、溴化丁基橡胶塞包装。 1套/盒。 1套包含人凝血酶原复合物1瓶,人凝血酶原复合物溶解液1瓶。

[Packaging] Borosilicate glass vial, sealed with bromobutyl rubber stopper, packaging of 1 set per carton. 1 set contains a vial of human prothrombin complex, and solution.

29. 硼硅玻璃模制注射剂瓶、溴化丁基橡胶塞包装。 1套/盒。 1套包含人凝血酶原复合物1瓶,人凝血酶原复合物溶解液1瓶。

[Packaging] Borosilicate glass vial, sealed with bromobutyl rubber stopper, packaging of 1 set per carton. 1 set contains a vial of human prothrombin complex, and solution.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!