
词语导航
基本信息
词语:清洗阀
繁体:清洗閥
拼音:qīng xǐ fá
英语翻译
【化】 purge valve
分词翻译
清洗的英语翻译:
clean; purge; purge of; rinse; scour
【计】 cleaning; erase
【医】 cleaning
阀的英语翻译:
clique; valve
【化】 valve
【医】 limen; limina; valve
翻译例句
1. 清洗阀杆的外露部分(不要擦伤)。
Clean exposed portion of valve stem (Do not scratch).
2. 清洗阀杆的外露部分(不要划伤)。
Clean exposed portion of valve stem (Do not scratch).
3. 我们采用的是具备高冲击性结构的共聚物,采用O型弹簧垫圈密封和清洗阀防水设施。
Our high-impact structural co-polymer cases are waterproof with an O-ring seal and purge valve.
4. 本文介绍了一套燃油蒸发排放控制系统(EECS),此系统主要包括炭罐、清洗阀、油气分离器、翻车阀等。
In this paper, an EECS (Evaporation Emissions Control System), which includes the canister, purge valve, vapor-liquid separator, rollover leakage protection valve, is designed and tested.
5. 可靠的和经过验证的进气控制阀和清洗阀可靠保证年和适当的塔机操作(终身保修)LF系列25- 620立方英尺转移。
Reliable and proven inlet air control valves and purge valves assure years of reliable shifting of towers and proper dryer operation (Lifetime Warranty) LF Series 25-620 CFM.
6. 禁止居民用水清洗道路和人行道,或使用没有自动断阀装置的水龙头。
Residents are forbidden to use water to wash down paths and pavements, or to use a hose without an automatic shut-off valve.
7. 彻底清洗安全阀阀体的所有内部表面。
Thoroughly clean all inside surfaces of the relief valve body.
8. 清洗:检查或更换磨损的阀瓣,断开控制管道的连接,采用钝工具和锤子敲击阀帽上的接片,然后旋松阀帽螺纹。
To Clean: Inspect or replace worn valve disc, disconnect control pipe and unscrew bonnet from valve body using blunt tool and hammer on bonnet lugs.
9. 所有水系统安全阀和控制阀都需要也必须进行年度检查。定期检查、检测和清洗能够确保使用寿命最长和产品性能正常。
Annual inspection of all water system safety and control valves is required and necessary. Regular inspection, testing and cleaning assures maximum life and proper product function.
10. 介绍了新研制的一种新型清洗机所采用的调压溢流阀和转速调节阀结构及其原理。
This paper introduces the structure and principle of the pressure regulating overflow valve and rotation speed regulation valve used in a new type of cleaner.
11. 要求而且有必要每年一次检查所有安全阀和控制阀。定期检查、测试和清洗能够保证最长的使用寿命和正常的产品功能。
Annual inspection of all safety and control valves is required and necessary. Regular inspection, testing and cleaning assures maximum life and proper product function.
12. 管路上的各种阀门在安装前要拆开清洗,检查阀柄是否灵活,并经试压不漏后方可安装。
Take apart all valves along the pipeline for washing before installation, check whether valve handles are flexible. The valves can be installed after passing the pressure test.
13. 结合实际经验,探讨了阀类零件超声清洗的一般流程和超声清洗工艺技术参数的合理选择。
Furthermore, linking with practical experience, to explore the common process of ultrasonic cleaning and the rational choice to the technological parameters of ultrasonic cleaning for valve parts.
14. 作为应用实例,介绍了阀类零件多工位自动清洗线的总体设计和机械结构及功能。
Finally, as an applied example, the paper introduces the general design of multi-locations automatic cleaning line for valve parts as well as its mechanical structure and functions.
15. 该计量阀很容易拆卸和清洗,使用不锈钢路径部件和聚四氟乙烯密封,具有最大范围的化学兼容性。
The metering valve is easily disassembled and cleaned, using stainless steel wetted path components and Teflon seals for the widest range of chemical compatibility.
16. 本电磁阀自带的过滤器无需拆卸管子即可非常方便的清洗,只需用手拧下螺帽,拔除塑料滤片即可清洗。
The built-in filter of a solenoid valve can be cleaned without dismantling its sleeve, but simply unscrewing its nut to pull out the plastic filtering plate.
17. 阀瓣可以在不拆卸安全阀模块的情况下进行清洗。
The disc can be cleaned without disassembly or the relief valve module.
18. 应彻底清洗所有和物料接触的部件,包括活塞缸、活塞头、O型圈、单向阀、灌装头、料桶、料斗等,发现破裂损伤的密封应及时进行更换。
Thoroughly clean all parts exposed to material, including piston barrel, piston head, O-ring, one-way valve, filling head, feeding tank, hopper, etc. Damaged seal shall be immediately replaced.
19. 检查阀瓣橡胶,如果需要,则进行清洗或更换。通过逆时针方向旋转白色垫圈螺纹就可以拆卸阀瓣。
Inspect the disc rubber and clean or replace if required. The disc can be removed by screwing the white washer counterclockwise.
20. 介绍新研制的一种新型清洗机所采用的调压溢流阀和转速调节阀结构、原理及工作过程。
This paper introduces the structure, work laws and process of overfall valve and rotate speed control valve in a lately devel oped cleaner.
21. 本电磁阀自带的过滤器无需拆卸管子即可非常方便的清洗,只需用手拧下螺帽,拔除塑料滤片即可清洗。
Without removing the solenoid coil, we can easily clean the filter this solenoid valve carries just by manually unscrewing the nut, pulling off the plastic filtering disc and cleaning it.
22. 检查阀瓣橡胶,如果需要,则进行清洗或更换。
Inspect the disc rubber and clean or replace if required.
23. 清洗:检查或更换磨损的阀门阀瓣,断开控制管线,采用钝工具和锤打阀盖凸耳从阀体上旋下阀盖。WwW.wENtiYi.CoM
To CLEAN: Inspect or replace worn valve disc, disconnect control pipe and unscrew bonnet from valve body using blunt tool and hammer on bonnet lugs.
24. 当阀塞离开阀座位置时,被压缩的清洗流体介质变成冲刷流体介质,实现冲刷作用。
The flushing action is achieved as the compressed purge media is released to become the flush media when the plug unseats .
25. 为了保持协调一致的阀座密封性能和延长阀门的使用寿命,建议用户在每当操作阀门后都清洗和冲刷美国太平洋楔塞阀一次。
To provide consistent seating performance and prolonged valve life, it is recommended that you purge and flush your Pacific Wedgeplug valve each time it is operated.
26. 从安全阀外壳上拆卸活塞和弹簧,彻底清洗包括隔膜的所有部件。
Remove the piston and spring from the relief valve housing and thoroughly clean all parts including the diaphragm.
27. 从安全阀外壳上拆卸活塞和弹簧,彻底清洗包括隔膜的所有部件。
Remove the piston and spring from the relief valve housing and thoroughly clean all parts including the diaphragm.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
