焊接件用英语怎么说,焊接件的英文翻译


词语导航

基本信息

词语:焊接件

繁体:焊接件

拼音:hàn jiē jiàn

英语翻译

【化】 weld assembly; welded element

分词翻译

接的英语翻译:

receive; accept
【电】 connecting

件的英语翻译:

a unit; letter

翻译例句

1. 主营:扳金焊接件、大型冷作焊件。

Main: pull the welding parts, large pieces of Cold Working welding.

2. 并阐述了焊接件的应用及其经济效益。

The application of weldment and its economic efficiency is also described.

3. 讨论焊接件结构的设计方法及注意事项。

Discasses the way of the solder work structure design and notes.

4. 该设备为钢板的焊接件,回火处理驱动应力。

The device for welding steel, tempering driving stress.

5. 应力计算结果得出焊接件中只有数兆帕的拉应力。

The internal stress of the joined materials was only several MPa according to the result of calculation.

6. 可焊接大型、形状复杂及装配形状不规则的焊接件。

Welding can be large, complex shape and welding assembly irregularly shaped pieces.

7. 焊接件疲劳寿命与焊接角之间呈现出指数衰减关系。

The fatigue life of the welding structure exhibits an exponential decay function of the welding Angle.

8. 当您在焊接的地方,您可以焊接件的铰链在门的拍摄地。

After you have welded the shoot sides in place you can weld the hinge pieces to the door.

9. 本文阐述振动时效新工艺在机车焊接件上的试验和应用。

This article expounds the test and application of new technology of vibration ageing to the welded workpiece of electric locomotive.

10. 采用激光超声技术对扩散焊接件的界面联结质量进行非接触检测。

Laser ultrasonic technique is used for contactless inspection of diffusion bonded steel parts.

11. 本发明涉及一种精炼炉铸铁型水冷炉盖,炉盖以铸件代替焊接件。

The invention relates to a cast iron type water-cooling furnace cover of a refining furnace, which adopts a casting instead of a welding part.

12. 料斗:料斗是金属焊接件,有敞开和密封两种形式。用来盛装货物。

Feeder: metal constructional part, including open and close types, and used for loading cargo.

13. 结果表明,在本试验条件下两种焊接件试样与高温钠具有好的相容性。WwW.WEnTiYi.coM

The results showed that the compatibility of the two weldments with high temperature sodium is good under these test conditions.

14. 采用浓度为3%的盐水,对不同激光工艺参数的焊接件进行了腐蚀试验。

Salt water with the concentration of 3% is used in the corrosion test for the samples welded under different laser parameters.

15. 机车传动轴系列零件为小直径回转体焊接件,焊接难度大,质量要求高。

The series of locomotive transmission shafts are cylindric welded components with small diameter, which have many welding difficulties and high quality requirement.

16. 随着激光单脉冲能量输入的增加,焊接件的横向收缩变形和失稳变形变大。

With the single-pulse laser energy input increasing, the transverse shrinkage and buckling distortion are improved.

17. 系统地阐述了计算机辅助焊接件展开图形自动生成软件系统的设计方法与原理。

The paper discusses the design method and principle for "Automatic Creation Software System of Outspread Drawing for Welding".

18. 本文根据线性累积损伤理论,给出了农机焊接件在谱载荷作用下的寿命估算方法。

According to the linear cumulative damage theory, a method for estimating life for welding structure of farm machinery acted under load spectrum is given.

19. 用金属磁记忆检测技术,对不同热处理状态下焊接件的磁场强度进行了检测和分析。

The magnetic density of weldments was detected and analyzed in different heat treatment conditions by metal magnetic memory technology.

20. 在焊接前对工件施加对应量的反变形,进行激光焊接实验,再用三坐标测量仪测量焊接件。

The equal reverse deformation on the workpiece was proposed before welding, and the welded workpiece was measured using CMM after laser welding test.

21. 所以,制造中各工序严格执行工艺规范和标准要求,是提高焊接件质量和安全可靠性的保证。

Therefore, improvement of quality and reliability of the welding parts can be guaranteed by the strict implementation of the technology regulation and standard in each procedure of the manufacture.

22. 文章介绍东方-日立型600MW汽轮发电机线圈制造、焊接件制作、机械加工和装配工艺。

This paper introduces the manufacturing technique of Dongfang-Hitachi 600mw turbo-generator such as winding manufacturing, welding parts production, mechanical machining and assembly process.

23. 焊接件等结构件在制造过程中会产生残余应力,影响其尺寸稳定性和使用寿命,因此必须消除。

The residual stress will produce in weldments and other construction parts during the manufacturing process and will harm their dimension stability and service life, and therefore must be relieved.

24. 本发明通过波纹管焊接件夹持波纹管的端部,避免波纹管被焊穿,提高了焊接的稳定性和质量。

The welding piece of the corrugated pipe clamps the end parts of the corrugated pipe to prevent the corrugated pipe being welded through and improve the welding stability and quality.

25. 分析了入射角改变对焊接件外观形貌、焊缝截面、焊缝板间连接宽度以及所承受的拉剪载荷的影响。

The transverse weld topography, the connect width between plates and tension and shear load were analyzed when the incident angle changed.

26. 利用大型有限元分析软件ANSYS,对空心球与钢管焊接件的温度场和应力应变场进行了三维数值动态模拟。

The 3d finite element numerical dynamic simulation of welding between hollow ball and pipe was carried out based on ANSYS.

27. 本文介绍了振动时效技术在我厂大型轴类锻件、无缝钢管锻件、曲轴锻件及大型焊接件上的应用实例并进行了分析。

This paper introduces and analyses the applied examples of vibratory stress relieving in heavy shaft forging, seamless steel tube forgings... Crankshaft forgings and heavy weldment in our plant.

28. 公司从创建到现在已有多年历史,是一家致力于冲压件、焊接件、弯管件、管件、摩托车配件、汽车配件及金属制品于一体的专业厂家。

Our company have been established for many years, we are specializing in pressing products, welding products, tube curving products, tube, motorcycle and car accessories and metal products.

29. 公司从创建到现在已有多年历史,是一家致力于冲压件、焊接件、弯管件、管件、摩托车配件、汽车配件及金属制品于一体的专业厂家。

Our company have been established for many years, we are specializing in pressing products, welding products, tube curving products, tube, motorcycle and car accessories and metal products.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!