
词语导航
基本信息
词语:液压锻造
繁体:液壓鍛造
拼音:yè yā duàn zào
英语翻译
【化】 hydraulic forging
分词翻译
液的英语翻译:
fluid; liquid; succus
【化】 liquor
【医】 Fl.; fld.; Fluid; humor; juice; Liq.; sap; succi; succus
压锻的英语翻译:
【机】 press forging
造的英语翻译:
build; concoct; create; educate; fashion; go to; invite; make
翻译例句
1. 虽然这种液压锻机比落锤锻造要昂贵得多,但它除了能给予大零件较高的强度和更均匀的组织外还有其它优点。
Although the hydraulic forging press is a more expensive piece of equipment than a drop-forge, it has advantages beside those of giving greater strength and more uniform structure to large components.
2. 锻造用液压千斤顶多是水压机,吨位较高。
Forging USES the hydraulic jack much is the hydraulic press, the tonnage is high.
3. 快速锻造液压机已成为目前重要的锻造设备之一。
The high speed forging hydraulic press has already become one of the most important forging equipment.
4. 介绍泵直接传动的锻造液压机工作原理,对其控制机理、数学模型、控制策略进行了研究,并成功地应用于生产实践中。
The principle of forging hydraulic press by pump direct drive is introduced in this paper, the math model, control method and strategy are also described.
5. 铆接机、金属屑压块机、锻造操作机、大型热锻液压机等产品。
Riveting machines, metal shavings Press, forging machine operators, large products such as hot forging hydraulic press.
6. 外露的闭门器:BHMAA156.4,齿条和小齿轮和液压式可调闩锁速度,由钥匙阀和锻造钢铁主臂控制。
A. Surface Closers: BHMA A156.4; rack-and-pinion hydraulic type with adjustable sweep and latch speeds controlled by key-operated valves and forged-steel main arm.
7. 对大型自由锻造液压机车间的工艺设计具有较高的参考价值。
It provides reference for process design of heavy free forging workshop.
8. 陈柏金。锻造液压机组液压控制系统研究[d]。武汉:华中理工大学,2000。
CHEN Baijin. Research on Hydraulic Control System of Forging Hydraulic Unit [d]. Wuhan: Huazhong University of Science and Technology, 2000.
9. 仿真结果表明,对直接驱动的大流量、高压液压机而言,压力建立过程是直接影响压机锻造次数的关键因素之一,是高速液压机液压系统设计应考虑的问题之一。Www.WENTIyi.Com
The results show that the time of pressure building-up is a main factor affecting the forging number of press. This is a problem to take into account when designing a high-speed hydraulic press.
10. 仿真结果表明,对直接驱动的大流量、高压液压机而言,压力建立过程是直接影响压机锻造次数的关键因素之一,是高速液压机液压系统设计应考虑的问题之一。
The results show that the time of pressure building-up is a main factor affecting the forging number of press. This is a problem to take into account when designing a high-speed hydraulic press.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
