
词语导航
基本信息
词语:工艺负荷
繁体:工藝負荷
拼音:gōng yì fù hé
英语翻译
【化】 technical load
分词翻译
工艺的英语翻译:
craft; technics; technology
【计】 MOS technology
【化】 methodology
【经】 technology
负荷的英语翻译:
bear; borne; load; onus
【计】 load line
【化】 load
【医】 load
翻译例句
1. 制砂机现场在矿业领域,广泛地应用于磨矿前段工艺,它能产生大量的粉矿,减少高成本的磨矿负荷。
System in mining field pressure-blasting machine site, widely used in grinding anterior process, it can produce a lot of powder grinding, reduce the high cost of grinding the load.
2. 纺织废水污染负荷的90以上是由工艺过程的各种化学品构成的。
Over 90% of the pollution load of textile wastes is contributed by the process chemicals.
3. 为后续生化处理降低设备负荷、以废治废降低治理成本的新工艺设计,提供设计思路和可靠的实验数据。
The result can provide date of design and experiment for lowering equipment load of treating biology and chemistry and for reducing the cost of new technology design.
4. 介绍了改造后的解吸塔在高负荷、高浓度条件下如何摸索工艺参数,提高解吸效率的有关问题。
This paper introduces how to probe into technological parameters of the revamped desorption column under high concentration and high production load, so as to improve the desorption efficiency.
5. 整个工艺具有流程简单、维护方便、抗冲击负荷能力强、运行稳定等特点。
The process was characterized for simple process, convenient maintenance, strong impulsion load resistance, and stable operation.
6. 该工艺具有运行稳定、耐冲击负荷、运行成本低的特点。
The process was characterized by steady operation, resistance to shock loading, and low operating cost.
7. 该工艺具有较强的抗冲击负荷能力,应用前景广泛。
The process has higher capacity in resistance to shock loading and will be widely applied in future.
8. 工程实践表明,该工艺处理效果稳定、耐冲击负荷、工艺组合合理。
The running results showed that treatment efficiency of the technology is stable, tolerable in shock load and reasonable for the combination of processes.
9. 介绍了尼龙66纺丝工艺对工业丝物理性能如线密度、强力、定负荷伸长率的影响。
The effects of spinning process on linear density, tenacity and elongation of Nylon 66 technical yarn were described.
10. 它综合活性污泥法和SBR工艺特点,与生物选择器原理结合在一起,具有抗冲击负荷和除磷脱氮功能。
It synthesizes the characteristics of activated sludge processing and SBR in combination with a biological selector, shock loading and fluctuations in the influent can be completely buffered.
11. 采用悬浮载体生物流化床工艺处理城市生活污水,考察了容积负荷对其处理效果的影响。
The influence of different COD volume loading on removal efficiency of urban domestic sewage in suspended carrier biological fluidized bed reactor was investigated.
12. 城市生活污水污染负荷已超过工业废水污染负荷,处理工艺的优化就成为当今城市污水处理的重要课题。
Pollution load of city sewage has already exceed the sewage of industry pollution load, so the disposal technology optimizing became an important problem of dealing with city sewage nowadays.
13. 本工艺将脱硫工序整合在气化阶段,以减轻下游净化工序的负荷。
The process integrates a desulfurization procedure into the gasification stage, thereby reducing the load of a downstream purification procedure.
14. 这为工艺运行中及时、合理地调整COD -污泥负荷来提高系统脱氮效果提供了一条新途径。
The model supplies a new way to change COD_sludge load scientifically and timely to improve the removal efficiency of nitrogen in the Sequencing Batch Reactor.
15. 本文提出了一种基于工件制造工艺的并考虑机床负荷的单元划分算法。
In this paper, a cell formation method is developed based on part processing routes and machine - load.
16. 分析了金口岭铜矿碎矿工艺存在的流程不合理、设备负荷不均、无法满足球磨工艺要求等主要问题。
The main problems existed in the crushing process of Jinkouling Copper Mine, such as improper flowsheet and uneven equipment loads, are studied in detail.
17. 介绍了我国的LNG示范装置、调峰型工厂和基本负荷型工厂的状况,包括这些装置和工厂的生产规模和工艺流程。
The modeling plant, the peak-cutting plant a nd the basic loading plant of LNG in China are introduced including their production scales and process flows.
18. 采用HTP工艺可以有效降低其控轧生产时的轧制负荷。
The rolling load resulted from the controlled rolling process during production can be decreased effectively by application of HTP.
19. 结果考察工艺的启动挂膜性能以及硝化液回流比和进水负荷对脱氮效果的影响。
The influence of internal recycle ratio and influent loads on biological nitrogen removal was discussed.
20. 工艺特点:污泥处理负荷高,出水指标高,不需要传统工艺中的二沉池等。
Crafts features: high sludge treatment burden, high outlet water standard, and no need of the Secondary sedimentation tank like the traditional crafts.
21. 在CO_2汽提法生产尿素的工艺管理上,控制高负荷、高转化率、高质量副产蒸汽是最佳的节能路线。
During urea production management with CO2 stripping process, the optimum line of energy saving is to control the "3-highs" which are high load, high conversion and high quality by-product steam.
22. 在此介绍了针对负荷的冲击,如何调整工艺,恢复污水处理系统正常运行。
It is introduced how to regulate the process and restore a normal operation of the sewage treatment system on condition of a loading shock.
23. 文章对产生纬向停台的原因及相应解决措施进行了详细讨论,指出合理设置纬向工艺参数、减少纬纱张力负荷以及把好原纱质量关是降低纬向停台、提高织机效率与效益的重要途径。
It points out that rationally setting weft-related process parameters, reducing weft tension and taking strict control over the quality of filling yarn are effective measures for r.
24. 针对国内其它相似装置,在不影响稀释蒸汽发生器负荷的情况下,采用中段回流取热用于工艺水汽提,合理利用热量。
Like other similar plant, when not to influence the heat duty of the dilution steam generation, the duty is adopted from the middle circumfluence to reach the energy utilization reasonably.
25. 通过正交试验,探讨了A SBR工艺最为重要的两个操作参数即充水时间和负荷率对ASBR工艺过程的影响。wWW.WentIYi.coM
Two essential operational parameters of (ASBR) - fill time and organic loading rate were discussed for their effects on the process performance through orthogonal tests.
26. 生命周期评价是一种评价产品、工艺过程或活动的整个生命周期对环境的负荷的工具之一。
Life cycle assessment is a tool to evaluate the life cycle of products, processes and activities impacting environment.
27. 生命周期评价是一种评价产品、工艺过程或活动的整个生命周期对环境的负荷的工具之一。
Life cycle assessment is a tool to evaluate the life cycle of products, processes and activities impacting environment.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
