离心叶轮用英语怎么说,离心叶轮的英文翻译


词语导航

基本信息

词语:离心叶轮

繁体:離心葉輪

拼音:lí xīn yè lún

英语翻译

【机】 radial impeller

分词翻译

离心的英语翻译:

【医】 centrifugalization; centrifugation; centrifuge

叶轮的英语翻译:

impeller
【化】 impeller; lobed wheel; paddle wheel; vane wheel

翻译例句

1. 本文对离心叶轮的形状优化设计过程进行了研究。

A shape optimization procedure for integrated impellers is considered.

2. 对控制环量方法在离心叶轮准三元设计中的应用展开了研究。

This paper focuses on the application of method of controlled circulation in the quasi three dimensional design process of centrifugal impeller.

3. 本文研究了离心叶轮内的流动及不同叶片出口角对离心泵性能的影响。

This paper studies the influence of flow in centrifugal impeller and outlet blade angle on the performance of centrifugal pumps.

4. 结合设计实践,提出了亚声速离心叶轮CAD研究中应重点解决的若干理论问题。

In this paper, connected with centrifugal impeller design, authors proposes some theory problems to he investigated in CAD research of subsonic centrifugal impellers.

5. 结果表明,无过载离心叶轮内部流动既没有出现分离,也没有明显的尾迹区存在。

The result shows that there exists neither flow separation nor apparent wake flow within an non-overload centrifugal impeller.

6. 提出采用壳单元与环单元耦合的方法对带分流叶片整体离心叶轮进行弹塑性分析。

An approach for elastoplastic stress analysis of integrated impeller with splitter is presented in this paper.

7. 轴向旋涡流是离心叶轮内特殊的流动现象,它的速度分布规律与叶轮特性关系密切。

Relative eddy is a special flow phenomenon, occurring within centrifugal impeller passage. Its speed distribution is closely related to impeller characteristics.

8. 该方法的差分计算网格通过代数变换关系生成,可方便地应用于离心叶轮设计分析。

This method is accomplished with calculation grids generated by an algebraic transformation, and thus it can be easily applied to the design analysis of centrifugal impellers.

9. 二次流是叶轮通道内流动损失的一个原因,对离心叶轮机械的性能产生不利的影响。

Consequently, secondary flow is generated by the combined effects of centrifugal and Coriolis forces and it may induce separation of the boundary layers.

10. 本文的第一部分介绍了一种离心叶轮气动优化的新方法,且特别侧重介绍其基本思想。

A new method for optimization of aerodynamic design for centrifugal impellers is presented in the first part of this paper, and especially the essential thought of this method is described.

11. 采用直接求解偏微分方程组的方法生成具有复杂扭曲规律的三元离心叶轮贴体网格坐标。

The body-fitted computational grid for twisted channels of a centrifugal impeller is generated by solving elliptic partial differential equations directly, so that the grid lines are smooth.

12. 基于CFX软件平台,对带无叶扩压器离心叶轮机械内部的非定常流动进行了数值计算分析研究。

The unsteady flow within a centrifugal fan with vaneless diffuser was numerical simulated and analyzed on the CFX software flat.

13. 由于工作台摆动角度受机床结构的限制,小摆角五坐标数控机床不能直接进行离心叶轮的连续加工。

Five-axis NC machine tool with small pendulum Angle table can not carry out continuous cutting of the part of centrifugal turbine because of the structure of machine tool.

14. ②第一套方案对离心叶轮大叶片75%左右轴向弦长前尖部流场的改善是失速裕度提高的主要原因;

The main reason of extended stall margin was that about 75% axial chord of the tip flow field has been improved.

15. 轴向旋涡流动是离心叶轮叶片之间一种特殊的相对流动,其流动规律是离心叶轮正反问题研究的重要基础。

Relative eddy is a special relative flow within centrifugal blade passage, which is of prime importance in flow study of pumps.

16. 模拟结果与已有实验结果吻合,说明采用雷诺应力湍流模型能准确描述超高速离心叶轮中固体颗粒的运动轨迹。

The conclusions show that Reynolds stress model can be used to describe the tracks of particles in the extra-high speed centrifugal impeller accurately.

17. 讨论了改变叶片数目,增加叶片厚度,调整分流叶片周向位置以及增加间隙高度等对离心叶轮流量、压比和效率等总体性能的影响。

The influence of blade number, blade thickness, location of splitter blades and tip clearance on mass flow, pressure ratio and efficiency is showed.

18. 本文将曲面造型与数值计算有机的结合在一起应用到离心泵叶轮的优化设计中。wWw.weNtiyI.COM

In this paper, an organic combination of surface molding and numerical calculation is applied to optimization design for centrifugal pump impellers.

19. 离心泵的基本构造是由六部分组成的,分别是:叶轮,泵体,泵轴,轴承,密封环,填料函。

Basic structure of the centrifugal pump is composed of six parts, namely: impeller, pump, pump shaft, bearing, seal ring, stuffing box.

20. 本文为提高离心泵叶轮的设计质量及效率提供了一个新的方法。

CAD method for improving design quality and efficiency of centrifugal pump impeller is provided.

21. 本文分析并计算了含尘离心风机叶轮的磨损和尘粒的流动轨迹。

The flow traces of particulates and the erosion of impellers in centrifugal fans with particulates were calculated and analysed in this paper.

22. 给出了离心压缩机叶轮粘性尾迹速度亏缺值及尾迹宽度的计算方法。

The calculating method of viscous end speed defective value & end width for centrifugal compressor impeller is given.

23. 因此,有必要开展离心压气机叶轮五轴高精度数控加工技术的研究,以期进一步提高压气机的性能。

Therefore, in order to improve the performance of compressor, it is necessary to accomplish the high accuracy five-axis nc machining of centrifugal compressor impeller.

24. 本文给出了一种以微型计算机为工具绘制离心压气机叶轮图形的方法。

This paper gives a method for drawing centrifugal compressor impeller by use of microcomputer.

25. 论述了离心通风机叶轮进口相对涡流的产生及其变化规律。

Produce & Change low of relative vortex at impeller inlet of centrifugal fan are discussed.

26. 采用边界元法对螺旋离心泵叶轮中的三维势流进行了数值计算。

The three-dimensional potential flow inside the impeller of a screw centrifugal pump was analysed by the boundary element method.

27. 单吸、单级卧式离心泵,用封闭叶轮。

Single suction, single stage horizontal centrifugal pump with closed impeller.

28. 单吸、单级卧式离心泵,用封闭叶轮。

Single suction, single stage horizontal centrifugal pump with closed impeller.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!