可靠极限用英语怎么说,可靠极限的英文翻译


词语导航

基本信息

词语:可靠极限

繁体:可靠極限

拼音:kě kào jí xiàn

英语翻译

【电】 confidence limits

分词翻译

可靠的英语翻译:

credibility
【电】 confidence

极限的英语翻译:

limit; terminal; the maximum; utmost
【化】 limit(ing) point

翻译例句

1. 对这两种极限状态,应分别采用随机事件和模糊随机事件概率的数学模型进行其可靠度分析。wwW.wentiYi.cOm

The mathematical models of probability of random event and fuzzy random event should be taken to analyze the reliability of a structure for these two kinds of limit state.

2. 对计算得到的轮包成形极限图、应力应变分布图进行了分析,并采用基于网格分析法的物理实验验证了有限元建模的可靠性和正确性。

The validity of modeling, the accuracy and reliability of simulation results for stamping forming processes of hubcap are affirmed on the basis of grid strain analysis technique.

3. 在齿轮设计中,国产材料齿轮的弯曲疲劳极限应力仍然缺乏可靠的试验数据,大多是沿用ISO 6336提供的数据。

Bending fatigue limit stress is still short of reliable data for gear of domestic material in gear design mostly used are the data offered from ISO6336.

4. 本文提出了地震作用下列车正常行驶极限状态的概念,研究与之相应的最优可靠度问题。

In this paper, the conception of train-running limit state under earthquake is proposed, and the corresponding optimum reliability is studied.

5. 在役石油管道剩余极限强度评价是为保障在役石油管道安全可靠运行的基础工作。

The evaluation on the retained limit strength of in service oil pipelines is a basic job ensuring safe and reliable operation of the pipelines.

6. 船体结构的极限承载能力是反映船舶结构安全可靠的重要指标,历来受到船舶工程界的广泛关注和重视。

The ultimate load bearing capacity of ship hull structure is an important index expressing the safety and reliability of the structure, and it has widely been paid much attention and concern.

7. 因此,研究雨水管网的可靠性,采取基于可靠性理论的概率极限状态设计法来设计雨水管网有着重要的实际意义。

So studying reliability of rainwater pipe network and adopting probability limit state design method based on reliability theory to design rainwater pipe network have important actual meanings.

8. 计算结果说明,无粘结部分混凝土构件的正常使用极限状态下的可靠性提高,设计规范的“特征裂缝宽度”计算公式有较高的可靠保证。

The results are shown that reliability level of the members are sufficient, the guaranteed reliability is higher using the calculating formulas of characteristic crack width of current design codes.

9. 利用现有齿根弯曲疲劳极限应力数据及其它齿轮资料,提出了稳定工况下齿轮齿根弯曲强度可靠度计算方法。

Using present bending fatigue limit data of gear tooth and other materials of gears, the calculating method of re liability is proposed for bending strength of gear tooth st steady condition.

10. 可靠指标与极限状态方程中的各基本变量的变异性、抗力的概型分布、以及活荷恒荷效应比有关。

Reliability index is influenced by the variance of basic parameters, resistance distribution, and ratio of live load to dead load.

11. 本文针对土坡稳定分析方法中的安全系数法建立了可靠度分析的极限方程。

This paper set up limit equation of reliability analysis for factor of safety method in the stability analysis method of slope.

12. 对铁路桥梁浅基础采用以可靠性理论为基础的概率极限状态设计方法进行了分析研究。

Probability ultimate state design methods for railway bridge shallow foundations designed on the basis of reliability theories are analyzed and studied.

13. 基于可靠性原理,建立了闸门面板可靠度分析的极限状态方程。

Based on reliability theory, a limit state equation for gate faceplate reliability analysis was founded.

14. 以极限平衡理论和传统的安全系数方法为基础,将可靠度理论引入尾矿坝稳定性分析中。

Based on the limit equilibrium theory and traditional safety factor method, the reliability theory is introduced to analyze the stability of tailings dam.

15. 并采用工程系统可靠性分析方法,建立了综采工作面支护系统极限状态方程,提出了综采工作面支护系统可靠性的计算方法。

The project system reliability analysis method is adopted. The limit state equation is established. The calculation method of fully mechanized working face support system reliability is pointed out.

16. 具有初始缺陷板元的极限强度可靠性分析。

Reliability analysis of ultimate strength of plates with initial impact.

17. 本文将拉丁超立方抽样法与条件期望和对偶变数方差减缩技术组合用于分析船体总纵极限强度可靠性。

This paper proposes Latin hypercube sampling combined with variance reduction techniques of conditional expectation and antithetic variates to assess ultimate strength reliability of ship hull girder.

18. 基于极限状态函数矩估计的失效概率计算,提出一种新的可靠性灵敏度分析方法。

Based on the moment estimation of limit state function for calculation of failure probability, a new reliability sensitivity analysis method is presented.

19. 为了快速可靠地获得单桩的极限承载力,普遍采用高应变动测法来代替静载荷法检测基桩承载力。

High stain dynamic testing method is adopted to obtain pile"s ultimate bearing capacity quickly and accurately as a substitute for static loading testing method.

20. 本文通过实例验证了FLSD在判断复杂应变路径下的多道次零件成形比基于应变的成形极限图更加可靠、有效。

The thesis validates through actual experiments that FLSD is much more reliable and effective than the strain-based FLD in determining the multistage part formability under complex strain paths.

21. 针对结构隐式极限状态函数的可靠性分析,提出了一种支持向量机分类迭代算法。

For reliability analysis of structure with implicit limit state function, an iterative algorithm was presented on the basis of support vector classification machine.

22. 根据复合桩基极限承载力计算模式,建立了考虑桩基-承台-地基土三者共同相互作用的可靠度极限状态方程。

According to the evaluation mode of limit bearing capacity of compound piling, a limit state equation of reliability for the interaction of associated piling, piling cap, and groundwork soil is setup.

23. 针对隐式极限状态方程的可靠性分析,提出了一种基于失效域样本模拟的高效线抽样法。

For reliability analysis of implicit limit state function, an improved line sampling method is presented on the basis of sample simulation in the failure region.

24. 针对复杂隐式极限状态方程,提出了一种新的可靠性敏度分析方法。

For the complicated implicit limit state equation, a new algorithm was presented to analyze the reliability sensitivity.

25. 采用渐进崩溃法计算船体总纵极限强度,将响应面法与传统可靠性计算方法相结合来进行船体总纵极限强度可靠性分析。

Progressive collapse method is used to calculate ship ultimate hull girder strength and the combination of surface response method and traditional method is utilized to analyse reliability.

26. 随着高层及超高层建筑的涌现,桩基静载试验作为确定单桩极限承载力最可靠的方法已被广泛采用。

With more and more high-rise constructions have been builded, the static load test of pile is adopted as the foremost way to identify vertical ultimate bearing capacity of single pile.

27. 为了进一步提高螺栓连接设计计算的精确度,本文从强度设计准则、设计规范、基本计算公式等方面作了一些探讨,并着重对以屈服极限为门槛值的强度计算进行了可靠性分析。

In order to improve the accuracy and reliability of bolted joints in design, further investigation on the norm, criterion and basic calculation formulas in strength design are made in this paper.

28. 针对这样的情况,本文提出了通过人工神经网络拟合极限状态函数的方法来解决结构系统的可靠性问题。

To such a situation, this text has put forward and fitted the reliability problem of solving structure system of method of the state function of limit through the artificial neural network.

29. 该方法基于可靠度思想,以达到用极限承载状态时的强度储备系数或超载系数来表征大坝安全度。

This method is based on reliability idea, and the dam final stability coefficient dam of is defined by the strength reserve coefficient or over loading coefficient at limit equilibrium state.

30. 该方法基于可靠度思想,以达到用极限承载状态时的强度储备系数或超载系数来表征大坝安全度。

This method is based on reliability idea, and the dam final stability coefficient dam of is defined by the strength reserve coefficient or over loading coefficient at limit equilibrium state.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!