超声焊用英语怎么说,超声焊的英文翻译


词语导航

基本信息

词语:超声焊

繁体:超聲焊

拼音:chāo shēng hàn

英语翻译

【计】 ultrasonic bonding

分词翻译

超声的英语翻译:

【计】 ultrasound
【医】 ultrasound

焊的英语翻译:

solder; weld
【电】 soldering

翻译例句

1. 关于瞬时液相扩散焊的质量检测技术主要有两种,射线探伤和超声波检测。

There are mainly two quality inspection techniques of TLP, i. e. radiographic inspection and ultrasonic inspection.

2. 结果表明,超声c扫描技术可实现对结构件的电子束焊焊缝缺陷的定性、定位、定量检测。wwW.WenTIYI.cOM

It shows that the ultrasonic C-scan technique can not only identifies and locates the defect, but also precisely measures the defect size.

3. 与传统的改善结构疲劳性能的焊后处理措施相比,超声冲击处理是一种既高效又便捷的较为理想的工艺方法。

Ultrasonic impact treatment (UIT) is an effective and convenient method to enhance the fatigue strength of welded joints and suchlike structures.

4. 焊缝须进行超声波探伤检查并清除缺陷,焊后对焊缝余高进行铲除并磨平。

Ultrasonic defect detection inspection shall be carried out for welding seams and defects shall be removed. the excess weld metal of welding seam must be eradicated and abraded after welding.

5. 采用纵剪带钢生产小口径螺旋焊管时,超声波检验经常在焊缝的一侧发现缺陷波,而X射线拍片检验却很难发现。

The defects will be found in the seam side with ultrasonic inspection but hardly found with X ray inspection as the small diameter spiral pipe production with the split strip steel.

6. 用三维有限元方法对超声波线焊进行了瞬态的热-结构分析。

Thermal-structural analysis was performed for ultrasonic wire bonding(UWB) by three dimensional finite element method(FEM).

7. 详细介绍了在斜面焊口超声波探伤中采用声程调节扫描比例进行缺陷定位的计算方法,并给出了计算公式。

Method of calculation of defect site by ultrasonic inspection of indined plane welding has been described in detail, and formula have also been proved.

8. 本文介绍超声波在国产轿车后保险杠总成焊接中的应用,着重介绍了该焊装线的组成。

The paper describes the application of the ultrasonic in welding car"s bumper, especially in the construction of the welding line.

9. 提出一种对接头焊趾先进行一遍tig熔修处理,然后再实施超声波冲击的复合处理新方法用来改善焊接接头的疲劳性能。

A new compound treating method of improving fatigue performance of high-strength welded joint is that firstly treated the welded toe by TIG-dressing and then performed ultrasonic peening.

10. 使用超声波冲击焊趾来提高焊接接头及结构的疲劳强度,是国际上刚刚出现的一种新方法。

It is a new method to increasing fatigue strength of welded joints and structure by peening welded toes with ultrasonic peening equipment.

11. 介绍了压力容器人孔接管与厚壁筒体相焊时,如何控制产品的质量,避免产生裂纹,焊后通过超声波检测及时发现缺陷。

The paper introduced briefly produce quality control in pressure vessel′s shell and manhole nozzle welding, how avoided crack and found defect by ultrasonic testing after welding.

12. 超声铝丝焊接机和超声金丝球焊接机主要运用于半导体生产后工序中芯片焊盘与外框架间引线的焊接。

Ultrasonic aluminum wire bonder and ultrasonic gold wire bonder are mainly applied to joint the chip pad with the lead-frame in the later process of semiconductor producing.

13. 焊接机器人、BGA返修台、自动点胶机、视频显微镜、吸烟系统、焊台、锡炉、超声波清洗器。网络测试工具等。

Solder Robert, BGA rework station, Automatic Glue dispenser, Video Microscope, Fume absorber, Soldering station, Solder pot, Ultrasonic cleaner, Cable tester, etc.

14. TIG熔修处理工艺在焊趾区引入了残余拉应力,而超声冲击在焊趾区形成了较大数值的压缩应力。

Residual extend stress is produced at weld toe by TIG dressing, while compressing stress of high values by ultrasonic peening.

15. 在常规弧焊回路中采用了连续波和脉冲敲击式等不同的激励方式获得电弧超声信号。

For arc ultrasonic excitation, both the continuous and the pulse signal was separately applied to the test system including a conventional arc welding circuit.

16. 介绍了全焊透t型角焊缝超声波探伤的两种方法:单直探头法和单斜探头法。

Two methods for ultrasonic flaw detection of T-fillet welds with complete fusion are presented, i. e. Single straight probe and single tilting probe techniques.

17. 本文提出了一种非接触超声传感埋弧焊焊缝跟踪系统。

A new kind of the seam tracking system with non-contact ultrasonic sensor in SAW is presented in this paper.

18. 为了提高超声成像系统的分辨率,研制了用于检测双金属转子复合层扩散焊连接质量的超声换能器。

To enhance resolution of Ultrasonic Image System, an ultrasonic transducer used for testing bimetal clad layer was developed.

19. 提出了一种大尺寸长条形超声塑焊开槽焊头的设计方法,并对其进行了实验验证。

A new design method for large cross-section blade-like ultrasonic plastic welding horns with slots is pre-sented, and relative experiments have been done to validate this method.

20. 对使用计算机进行控制和管理的超声波连续自动探伤系统的硬件组成、软件设计思想以及在焊管生产中的应用状况进行了分析和介绍。

This paper analyzes ultrasonic continual automatic inspection system hardware compose design and software design thinking by computer manage and application on welded pipe production.

21. 介绍了国内焊管自动超声波探伤系统的探伤方法和探头的主要工艺参数,分析了国内焊管制管过程中超声波自动探伤系统耦合部分存在的问题。

An introduction is made of the detecting method of the automatic and ultrasonic defect detection system for welded pipes and the major technological parameters of the probes used in China.

22. 将可编程序控制器(PLC)应用于LSAW自动超声检测系统,可极大地改善焊管检测效率和可靠性,有益于提高焊缝质量和生产效率。

The application of PLC in the automatic ultrasonic inspection of LSAW can greatly improve the accuracy and efficiency of inspection, and is helpful for raising the welding quality and productivity.

23. 超声波焊接是发达国家色带生产企业普遍采用的色带焊接方法,而国内企业均采用落后的电阻丝焊。

Ultrasonic welding for ribbon is widely used in developed countries, electric resistance welding is still used in China.

24. 纵向角接接头超声冲击处理试件与原始焊态试件相比,疲劳强度提高1 73 %左右,疲劳寿命延长了3 2~ 70倍。

The fatigue strength of the longitudinal fillet welded joint specimen treated by ultrasonic peening increases by about 173% and the fatigue lifetime prolonges by 32~70 times.

25. 公司拥有各种先进的生产设备和检测设备,如进口波峰焊、全热风回流焊、超声波及全自动开关电源测试仪。

We owns various advanced production facility and inspection equipment, such as wave crest solder, hot wind flow solder, ultrasonic and full-automatic switch power supply test instrument.

26. 最后,本课题通过焊后的外观检测、磁粉探伤焊、超声探伤和射线探伤证明了焊接工艺规范合理可行。

Finally, the welding procedure has been proved to be feasible by as-welded appearance checking, magnetic powder inspection, ultrasonic inspection and radiographic inspection.

27. 公司采用OMICRON专利免焊接,以及超声波自动焊生产设备。

Our company uses OMICRON-patented production equipment without welding as well as ultrasonic wave auto welding.

28. 公司采用OMICRON专利免焊接,以及超声波自动焊生产设备。

Our company uses OMICRON-patented production equipment without welding as well as ultrasonic wave auto welding.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!