保存寄存器用英语怎么说,保存寄存器的英文翻译


词语导航

基本信息

词语:保存寄存器

繁体:保存寄存器

拼音:bǎo cún jì cún qì

英语翻译

【计】 save register

分词翻译

保存的英语翻译:

conserve; hold; keep; preserve; reserve; save; conservancy; conservation
preservation
【计】 save
【医】 Cons.; conservancy; conservation; preservation; Serv.; servation

寄存器的英语翻译:

register
【计】 R; RALU; register
【化】 memory; registor

翻译例句

1. 剩余的空间用来保存寄存器和存储本地变量。

The remaining space is used for saving registers and storing local variables.

2. 所以,在这个函数中,我们使用了回链指针、链接寄存器保存区和一个本地变量。

So, in this function, we are using the back chain pointer, the link register save area, and one local variable.

3. 在对任何域进行修改之前,都应该将条件寄存器保存到堆栈的这个区域中,然后在返回之前恢复。

The condition register should be saved in its area of the stack before any of these fields are modified, and then restored before returning.

4. 在序言中,所要做的第一件事情是保存链接寄存器。

In the prologue, the first thing you do is save the link register.

5. 当函数开始时,它实际上会将链接寄存器保存到调用函数的堆栈帧中,而不是自己的堆栈帧中,然后只有在需要时才会保存它。

When a function begins, it actually saves the link register in the calling function"s stack frame, not its own, and then only if it needs to save it.

6. 然而,在需要保存值的情况下,依然需要为参数预留空间;尤其在需要使用易失性寄存器传递参数时更是如此。

However, space must still be reserved for parameters in case the values need to be saved, especially since the parameters are passed using volatile registers.

7. 因此,在函数中使用非易失性寄存器之前,它的值必须保存到该函数的堆栈帧中,然后在函数返回之前恢复。

Therefore, before using a non-volatile register in a function, its value must be saved in the function"s stack frame, and then restored before the function returns.

8. 因此,使用简化ABI 的函数实际上可以通过从堆栈指针开始的负偏移量来保存、使用和恢复非易失性寄存器。

Therefore, functions using the simplified ABI actually can save, use, and restore non-volatile registers by using negative offsets from the stack pointer.

9. 堆栈帧的第一个部分是非易失性寄存器保存区。

The first part of the stack frame is the non-volatile register save area.

10. 最后,在索引寄存器间接寻址模式中,基址和索引都保存在寄存器中。

Finally, in indexed register indirect addressing mode, both the base and the index are stored in registers.

11. 正如我先前提到的,LR_OFFSET是堆栈末端到链接寄存器保存区的偏移量。

As I mentioned earlier, LR_OFFSET is the offset from the end of the stack to the link register save area.

12. 保存调用者的连接寄存器(LR)。

Save the caller"s link register (LR).

13. 在基指针寻址模式中,寄存器中保存的是基址,数字是偏移量。

In base-pointer addressing mode, the register has the base address and the literal number has the offset.

14. 链接寄存器保存区与 ABI的其他部分不同。

The link register save area is different from the other parts of the ABI.

15. 函数必须假设对于自己的前8个参数,它们只会通过寄存器传递,但是如果需要在程序中对参数进行存储,就仍然需要一个可用的保存区。

Functions must assume that for the first eight parameters, they are only passed by register, but they will still have a save area available if they need to be stored by the program.

16. 其他常见的格式还有 X-Form(接受两个加在一起的寄存器)和A-Form(可保存一个常量或一个常量相对偏移量地址)。

The other popular formats are the X-Form, which takes two registers which are added together, or the A-Form, which can hold a constant or a constant relative offset address.

17. 然后保存3个用于进行程序的主要控制的非易失性寄存器。

It then saves three non-volatile registers that will be used for the main control of the program.

18. 一组128个寄存器,每个128位宽(每个寄存器通常都可以用来同时保存4个32位的值)。

A set of 128 registers, each 128 bits wide (each register is normally treated as holding four 32-bit values simultaneously).

19. 保存转换因子的寄存器是按单个字节(而不是整个寄存器)的使用进行处理的(il将给定的值加载到每个字中,不过您需要按每个字节来使用这些值)。

The register holding the conversion factor was geared to a single byte usage rather than a whole register (il loads the given value into each word but you need it in each byte).

20. 保存这个函数中使用的所有非易失性寄存器(包括条件寄存器,如果使用了该寄存器的任何非易失性域的话)。

Save all non-volatile registers that will be used during this function (including the condition register, if any of its non-volatile fields will be used).

21. 因此,为了使用其他寄存器,就必须将其保存到堆栈中。

Therefore, in order to use the other registers, they have to be saved on the stack.

22. 寄存器的数量在每个处理器当中都是固定的,所以在程序的某个特定的位置,可以保存在寄存器中的变量的数量是有限制的。

As any processor has a fixed set of registers, there is a limit to the number of variables that can be kept in registers at any one point in the program.

23. 现在您可以看到为什么简化abi之前的规则要求只使用寄存器3到寄存器12:其他寄存器都是非易失性的,需要堆栈空间来保存这些寄存器的值。

Now you can see why our earlier rules for the simplified ABI required that only registers 3 through 12 should be used: the others are non-volatile and require stack space to save them!

24. 寄存器3应该保存第一个参数,寄存器4应该保存第二个参数,以此类推。

Register 3 should hold the first parameter, register 4 should hold the second one, and so on.WWW.WENTiyI.cOM

25. 链接寄存器保存区存有被调用函数(而非当前函数)的链接寄存器内容。

The link register save area holds the link register contents of the function being called, rather than for the current function.

26. 本地变量空间用作该函数的通用存储空间,寄存器保存区用于保存函数所使用的非可变寄存器的值。

The local variable space is used as a general storage area for the function, and the register save area is used to save the values of non-volatile registers that the function USES.

27. 寄存器3里面保存了第一个定点参数,寄存器4中保存的是第二个参数,依此类推,直到寄存器10。

Register 3 has the first fixed-point parameter, register 4 has the second, and so on through register 10.

28. LK位指定了下一个顺序指令的地址是否作为子例程调用的返回地址保存在链接寄存器中。

The LK bit specifies whether the address of the next sequential instruction is saved in the Link Register as a return address for a subroutine call.

29. 内存中的一块留用存储区,当程序中断产生时,CPU自动在其中保存程序计数器和工作寄存器的内容。

A reserved area of memory where the CPU automatically saves the program counter and the contents of working registers when a program interrupt occurs.

30. 内存中的一块留用存储区,当程序中断产生时,CPU自动在其中保存程序计数器和工作寄存器的内容。

A reserved area of memory where the CPU automatically saves the program counter and the contents of working registers when a program interrupt occurs.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!