
词语导航
基本信息
词语:铸造法
繁体:鑄造法
拼音:zhù zào fǎ
英语翻译
【机】 casting process
相关词条
1.casting(form)分词翻译
铸造的英语翻译:
casting; foundry; mint【计】 founding
法的英语翻译:
dharma; divisor; follow; law; standard【医】 method
【经】 law
翻译例句
1. 铸造法是生产复合材料的主要方法之一。
Casting is a main method for producing composites.
2. 得出了真空压差铸造法的最佳充型工艺参数。
Therefore, the optimum technologic parameters in vacuum differential pressure casting were obtained.
3. 实型铸造法具有制作铝-石墨粒子复合材料的潜力。
The full mould process had the potential to produce aluminium -graphite particle composite castings.
4. 用真空实型铸造法对涡旋压缩机动盘毛坯件进行了试生产。
The vorticity compressor parts were manufactured by the V-EPC process.WwW.WentIyI.CoM
5. 本文通过离心铸造法研究了球铁基表面复合碳化钨粒子的轧辊。
This paper reports the study of the ductile iron roller recombined with tungsten carbide particles on the surface by using centrifugal casting.
6. 铸造法是目前最主要的一种制备颗粒增强铝基复合材料的方法。
The casting process is the most important method of fabrication paniculate-reinforced aluminum matrix composites now.
7. 制造方法有:粉末冶金法、液态浸渗法、压铸法、熔搅铸造法。
There are four main technological methods:powder metallurgy, liquid infiltration, squeeze casting and compocasting.
8. 另外,研究了消失模铸造法铸型表面硬度、界面换热系数的变化规律。
Moreover, the variation law of mold surface hardness and interface heat transfer coefficient were studied.
9. 介绍了用低压铸造法生产铝合金减震筒的工艺过程,阐明了其工艺要点。
The process for producing aluminum alloy damping cylinder in low-pressure casting was introduced. The key processing factors were expounded also.
10. 在金属基复合材料的制备方法中,液态铸造法具有广泛的应用和发展前景。
The fabrication of metal matrix composites (MMCs) by using casting technique is accepted as a promising route for large quantity production.
11. 介绍了泡沫铅材料的主要制备方法——渗流铸造法、粉体发泡法和电沉积法。
The primary preparing methods of lead foam material such as infiltration casting process, powder foaming process and electrodeposition process were introduced.
12. 自从重力铸造和低压铸造法问世 ,人们就认识到金属型涂料的重要意义。
Since the advent of gravity casting and low pressure casting methods, people have realized significance of metal coatings.
13. 高速钢轧辊具有很强的竞争力。离心铸造法生产高速钢轧辊是主要的工艺方法。
The centrifugal foundry method is the main process to produce the high speed steel rolls which possess high competitive power.
14. 用中断挤压铸造法研究了ZL 109合金液在莫来石纤维预制块中的流动状况。
The flow front of ZL109 melt in mullite chopped fibre preform during melt infiltration was investigated with a method called stopping squeeze casting.
15. 在此基础上,对渗流铸造法中影响泡沫铝合金孔结构的其他工艺因素也进行了研究。
Based on these, the technique factors that influence the foam aluminum pore structure in the infiltration casting were studied.
16. 综述了利用外力场(离心铸造法和电磁分离法)制备自生梯度复合材料的研究现状。
The developing level of the technology of producing in-situ gradient composites in outside force field (centrifugal method and electromagnetic separation method)has been reported.
17. 结果表明,挤压铸造法是制造不连续碳纤维增强锌合金复合材料的简便、有效方法。
Experimental results show that discontinuous carbon fibers reinforced ZA-12 alloy matrix Composite can be fabricated availably by squeeze casting.
18. 介绍了泡沫金属电极的制备方法,对其中渗流铸造法的原理及工艺参数作了详细讨论。
Methods of making porous foamed metallic electrode are presented in this paper. The mechanism and technological parameters of penetration casting are elucidated in detail.
19. 采用搅拌铸造法,在纯铝中加入粉煤灰微珠颗粒作为增强体,制备铝基粉煤灰微珠复合材料。
The effect of various parameters on aluminum matrix composite including fly ash micro-sphere particles act as reinforced phase was investigated by using stirring casting technique.
20. 实型铸造法的关键基础技术包括:模样的材料及成形、涂料、型砂的振动充填、金属液的充填。
The key basic technology in full mould casting process includes: material and formation of pattern, coating, vibratory fill of moulding sand as well as molten metal filling.
21. 虽然梯度功能材料的制备方法很多,但效率较高、成本较低、操作较简单的方法是离心铸造法。
Although there are a lot of the fabricating techniques of functionally gradient material (FGM), the centrifugal casting method is more effective, cheaper and easier to operate.
22. 介绍了多孔泡沫金属材料常用的传统制备方法(铸造法、发泡法、烧结法和沉积法)及具体应用。
This paper reviews the conventional preparation techniques that include casting, forming, sintering and deposition and practical application for every technique of foam metal.
23. 介绍了国内外主要开发应用的冷成型法、热挤压法、离心铸造法和焊接法等内复合双金属复合管制造技术。
This article introduces inner compound metal pipe manufacturing technology of the cold forming method, heat extrusion method and centrifugal foundry method as well as welding method.
24. 对用真空差压铸造法生产的铝合金铸件性能进行了研究,从理论和实践量方面论述了其较好的铸件内在性能。
The internal quality of aluminum alloy castings that were produced by Vacuum Differential Pressure casting was studied with both theory and practice.
25. 冷却斜板铸造法是实现半固态铸造成形的一种简便而有效的方法,可以以较低的成本生产具有细小球晶组织的铸件。
The cooling slope casting is a branch of semi-solid casting technique, and it is also a simple and effective method to produce castings with fine globular microstructure at low cost.
26. 采用复合铸造法研制了一种芯部为低碳钢、外部为高铬铸钢的高耐磨碾齿,此碾齿用于玻璃厂破碎物料的粉碎机上,取得了良好的效。
By adopting a compound casting method, we have developed a kind of high wear resisting crushing bar, with low carbon steel interior, high chromium casting steel exterior.
27. 介绍上引法生产阳极磷铜的新工艺,重点介绍上引法生产阳极磷铜熔炼、铸造工艺。
Anodic phosphor bronze is commercially produced by upward casting process with the technology introduced.
28. 采用特种砂v法铸造工艺获得了良好表面精度和尺寸精度的铸造模具。
The fine surface quality and dimensional accuracy cast hot work die was obtained by special sand V method casting technique.
29. 采用特种砂v法铸造工艺获得了良好表面精度和尺寸精度的铸造模具。
The fine surface quality and dimensional accuracy cast hot work die was obtained by special sand V method casting technique.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
