熔渣的用英语怎么说,熔渣的的英文翻译


词语导航

基本信息

词语:熔渣的

繁体:熔渣的

拼音:róng zhā de

英语翻译

slaggy

分词翻译

熔渣的英语翻译:

regulus; slag; sprue
【化】 cinder

翻译例句

1. 煤灰与熔渣的熔融特性存在一定差异。

The fusibility of coal ash was different with that of slag.

2. 在钢铁冶金过程中,熔渣的起泡现象是非常普遍的。

During the steel metallurgy, the phenomena of slag bubbling up is very prevalent.

3. 熔渣的临界粘度温度均稍高于煤灰的临界粘度温度。

The critical viscosity temperatures of slag were slightly higher than those of coal ash.

4. 研究了超低碳钢保护渣的显微组织结构特征,并根据相图分析了熔渣的结晶性能。

The characteristics of the microstructure on super low carbon steel powder has been studied, and the crystallization performance of slag analysed by phase diagram.

5. 应用热力学原理,计算分析了各种铁合金的脱氧能力和脱氧产物形成液态熔渣的条件。

By means of thermodynamic principle the deoxidation power of several ferro-alloys has been calculated, and the conditions of the molten slag formation from deoxidation products has also been analysed.

6. 用改进后的气泡最大压力法测定了水、熔盐、熔渣的表面张力及密度,得到十分满意的结果。

It is claimed that the improvement effects on the observed data from the determination of surface tension and densities for water, molten salt, slag surfaces are very sati…

7. 本文介绍一种稳幅式双极性电流源,它是根据自动控制原理设计而成的,用于连续铸造熔渣的检测。

This paper introduces a stable amplitude bipolar current source. It was designed basing on the principle of automatic control. This circuit is suitable for continuous casting slag detection.

8. 对城市垃圾与煤混烧飞灰进行旋风熔融试验,分析了不同熔融温度条件下熔渣的微观形貌及重金属行为。

The melting characteristics and behavior of heavy metals of fly ashes were investigated under different melting temperatures.

9. 电渣熔铸过程中熔渣的流动决定了熔铸体系温度场的分布以及金属熔池的形状,最终影响熔铸钢锭的质量。

The flow of the molten slag pool determines the temperature distribution and the pool profiles in the electroslag casting process, which affects the quality of ingot casting.

10. 介绍了在钢水精炼过程中,添加一定量的活性石灰和萤石,提高精炼钢水顶渣的碱度,降低熔渣的熔点,改善熔渣的流动性。

In the liquid steel refining process the basicity of top slag can be increased, the melting point of the slag decreased and the fluidity improved by adding certain amount of active lime.

11. 金属和其他不能变成气体的无机材料,则会作为熔渣落到箱底。

Metals and other inorganic materials that do not turn into gas fall to the bottom of the chamber as molten slag.

12. 需焊接或热切割的表面应排除所有可能会损坏焊材或母材的杂物,如脂、油、灰尘、水垢、熔渣和油漆等。

Surfaces to be welded or thermally cut shall be cleaned of all foreign material such as grease, oil, dirt, scale, slag and paint that would be detrimental to either the weld or base material.

13. 当气体冷却,任何有毒的物质会被封在玻璃状的熔渣中,被安全的填埋。

When the gas is cooled, any hazardous elements in the waste end up sealed in a glassy slag that is safe to put into landfill.

14. 熔炼基本上是一个熔化过程,在此过程中炉料的组元在熔融状态下分解为两层或多层,这些层次可以是熔渣、冰铜、黄渣或金属。

Smelting is essentially a melting process in which the components of the charge in the molten state separate into two or more layers which may be slag, matte, speiss or metal.

15. 并且当熔渣与耐火材料的反应产物为高熔点的CA2、CA6和MA尖晶石相且连续交错分布时,能堵塞液相扩散通道,抑制熔渣向耐火材料内部的进一步渗透。

When the reaction products form as high melting point CA2, CA6 and MA spinel in a continuous solid phase it will clog the liquid channel and resist the further diffusion of fused slag in the brick.

16. 冶炼钢铁所产生的粒状熔渣(熔渣砂)。

Granulated slag (slag sand) from the manufacture of iron or steel.

17. 那些没能转化为气体的金属物和无机物质则被视为熔渣,留在熔炉炉底中。

Metals and other inorganic materials that do not turn into gas fall to the bottom of the chamber as molten slag.

18. 在焊接处看到了夹渣,气孔及未熔透区的油漆。

Slag, blowholes, and paint on unfused regions were observed at the welded junctions.

19. 本技术可适用于各种金属冶炼的熔渣处理,金属和非金属熔融制粒等生产过程。

The techniques can be applying into the production process of slag disposing of all kinds of metal smelting, metal and nonmetal melting and making grains.

20. 冶炼钢铁所产生的熔渣、浮渣(粒状熔渣除外)、氧化皮及其他废料。

Slag, dross (other than granulated slag), scalings and other waste from the manufacture of iron or steel.

21. 电渣炉是由溶渣实现电热转变的电阻炉(见电渣重熔)。

Electroslag furnace is made of slag change electric resistance furnace (esr).

22. 焊割作业有大量的火星飞溅和熔渣。

Soldering could cause numerous of spattered sparks and fused dregs.

23. 本文介绍现代控制理论在电渣重熔计算机控制中的应用。

In this paper, the application of morden control theory to electroslag remelting process controlled by a minicomputer is recommended.

24. 本文根据生产实践总结了巨型锭电渣重熔的技术、质量和经济优势。

In this paper, the technologic, qualitative and economic advantages on gigantic ingot ESR process are summarized on the basis of the productive practice.

25. 通常表现是切割射流的吹力减弱,切口下部残留的熔渣增多,上部边缘过熔而出现圆角等。

Usually the performance is a cut of the jet blew force is abate, the lower incision of the remainder of the slag increased, the upper edge of the melt and appear a round, etc.

26. 金属陶瓷具有良好的耐热态金属及熔渣侵蚀性能,可实现对高温熔体温度的连续测量。

The cermet had merits of high resistance to corrosion of hot metal and slag, it can be used for continuous temperature measurement.wWW.wentIYi.Com

27. 脱硫不涉及氧化,而是取决于熔渣是否有足够的碱度以及其温度是否足够高。

The removal of sulphuric doesn"t involve oxidation, but depends on whether the slag is sufficiently basic and the temperature is high enough.

28. 脱硫不涉及氧化,而是取决于熔渣是否有足够的碱度以及其温度是否足够高。

The removal of sulphuric doesn"t involve oxidation, but depends on whether the slag is sufficiently basic and the temperature is high enough.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!