
词语导航
基本信息
词语:铸机
繁体:鑄機
拼音:zhù jī
英语翻译
【机】 chamber machine
分词翻译
铸的英语翻译:
casting; founding
机的英语翻译:
chance; crucial point; engine; machine; occasion; organic; pivot; plane
flexible
【医】 machine
翻译例句
1. 在保证铸坯质量的前提下提高铸机产能。
The productivity and quality of slab have been improved.
2. 丽那排铸机丽那公司制造的机械排铸机。
Linotype a mechanical typesetting machine manufactured by Linotype.
3. 找出了影响铸机提高连拉炉数的主要因素;
Main factors in affecting high casting sequence in CC was analyzed;
4. 然后介绍了改善夹杂物去除和提高钢洁净度的铸机操作。
Then, operation practices at continuous caster to improve inclusion removal and steel cleanliness are reviewed.
5. 列举了几台新铸机的主要参数,展望了该技术在我国的需求。
The paper forecasts the development and demands for this technology in China.
6. 本文对铸机中主要液压系统的设计与调试作了相应介绍及说明。
This article presented a respective introduction and explanation to the design and adjustment of the main hydraulic system for this CCM.
7. 介绍了我公司生产的R73连铸机辊子的化学成分和热处理工艺。
The chemical composition and heat treatment process of roller for R73 continuous casting machine have been introduced in this article.
8. 在板坯铸机的生产过程中,二次冷却制度是影响铸坯质量的重要因素。
During the producing process of slab caster, secondary cooling system is a very important factor which influences slab quality.
9. 本文将讨论增加铸机拉速,提高整条生产线的可靠性和产品的开发等问题。
The project to increase caster speed, improve reliability of the whole plant and the development of the product mix will be discussed in this paper.
10. 仅仅过了九天的停机后,铸机已达到正常产量,其铸坯质量效果也非常今人满意。
After only a nine-day shutdown, the caster was up to normal production and initial quality results have been very satisfying.
11. 为防止板坯连铸中的缺陷,铸机的设计及生产必须考虑到控制铸坯上的应力和应变。
To prevent defects of continuous cast slabs, it must be considered to control the stresses and strains in slabs in casting machine design and operation.
12. 勒德罗排铸机:标题字排铸机的专利名称。它用手工执排字模,然后铸成单个铅字。
Ludlow: Proprietary name of a display-size typesetting machine for which the matrices are assembled by hand and the type is cast in line slug.
13. 该炉与机械手、专用电机转子铸铝压铸机相匹配,提高产品品质,改善工人的劳动环境。wWW.wENtiyI.com
Matching with manipulator and special rotor of die-casting machine, they can improve the quality and the working condition.
14. 蒙纳排铸机:蒙纳公司专利的热式铸字排字机,它逐个字符铸造,然后组合成行,而不是逐行字的铸造。
Monotype: Proprietary name for Monotype"s hot - metal type - casting machine which assembles characters individually rather than line - by - line.
15. 铸坯内产生针孔气泡缺陷的原因是钢液脱氧不良,产生大体积气泡缺陷的原因是铸机浇注过程中氩气流量过高。
The defects on pinhole bubble formed in slabs result from badness deoxidization, and the defects on large volume bubbles formed in slabs result from the high flux of argon during casting.
16. 文章系统阐述了方圆坯铸机二冷室设备存在的问题及解决问题的方法,通过二年的努力,二冷室设备完全满足了铸机高产的要求。
The problems and its solution for improvement of secondary cooling system performance are discussed. It can meet the requirement for high production of caster by two years effort.
17. 连铸结晶器保护渣是连铸过程非常重要的冶金材料,它对提高铸机拉速,稳定连铸工艺,扩大连铸品种,提高铸坯质量和产量都是一项极为有效的技术。
As a very important material during continuous casting, mold powder takes a key role in increasing casting speed, stabilizing continuous casing process and improving quality of products.
18. 即使是那些小支票——佛蒙特州勒德洛铸排机的漂洗工也得到了第一笔22.54美金——这些钱足以使历来高居贫困线上的寡妇们住在她们自己的屋中。
And even those tiny checks — Ida May Fuller of Ludlow, Vt. , got the first one, for $22.54 — were enough to allow widows, who had historically high poverty rates, to remain in their homes.
19. 航空发动机、燃机等精铸真空无余量空心涡轮、导向叶片及复杂结构件。多种热处理炉上用料盘,夹具等耐热合金钢精铸件。
The no machining directional solidification hollow turbine blades, hollow guide vans and complex structure parts used in aero engine and gas turbine made by vacuum precision investment casting.
20. 采用我公司铸态球墨铸铁件生产的华大橡胶机。
The Rubber Machine of WELLTECis made of the as cast SG iron castings produced by our company.
21. 分析软起动器的工作原理,结合在离心铸铝机的应用,阐明软起动器这种新型节能技术应用在三相异步电动机上的优越性。
In the light of application to centrifugal casting machine, working principle of soft starter is analyzed and the advantage of this new energy-saving technique of soft starter is presented.
22. 本文介绍了PLC控制系统组成、浇铸工艺流程、及PLC在离心球墨铸管机中的控制原理。
This paper discusses PLC control system formation, casting technical process and control theory of PLC in centrifugal casting iron pipe machine.
23. 一个操作工人可以最快的铸造速度操作数台这样的铸片机。
An operator should be able to operate a number of such machines, at a maximum casting speed.
24. 本文叙述铸渣机改造的内容和在制作安装过程中采取的措施。
The article describes the modification content of the slag casting machine and the measures during the installation and manufacture process.
25. 在检测浇注温度、铸型温度和铸型转速的基础上,用微机实现了对离心铸管机的过程控制。
Based upon the detection of the pouring temperature, and the mould temperature and speed, the process control for centrifugal pipe casting machines is realized by using a microcomputer.
26. 另外,将拉矫机的驱动系统移至连铸线外,可改善其工作环境,并方便设备维修。
Otherwise, it can be improvement operation condition and convenience maintenance to move the drive system of steecther out of the continuous casting line.
27. 炼钢-连铸生产的浇次组合与排序是带有工艺约束的并行机流水车间调度问题。
The cast grouping and ordering problem of steelmaking continuous casting hot rolling (SM-CC) is a combinatorial optimization problem.
28. 炼钢-连铸生产的浇次组合与排序是带有工艺约束的并行机流水车间调度问题。
The cast grouping and ordering problem of steelmaking continuous casting hot rolling (SM-CC) is a combinatorial optimization problem.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
