轮廓机用英语怎么说,轮廓机的英文翻译


词语导航

基本信息

词语:轮廓机

繁体:輪廓機

拼音:lún kuò jī

英语翻译

【机】 contour machine

分词翻译

轮廓的英语翻译:

outline; contour; lineament; profile; adumbration; schema
【计】 contour; outline
【医】 contour; outline

机的英语翻译:

chance; crucial point; engine; machine; occasion; organic; pivot; plane
flexible
【医】 machine

翻译例句

1. 手持式电动工具的安全性。第2-8部分:剪刀和步冲轮廓机的特殊要求。

Hand-held motor-operated electric tools - Safety - part 2-8: particular requirements for shears and nibblers.

2. 切割打孔的空气步冲轮廓机这是用于替换适用于(11899)的空气步冲轮廓机。它是恢复和替代打孔最佳的性能。

Cutter punch for Air Nibbler This Replacement punch fits the (11899) Air Nibbler. It is desirable to replace the punch and die to restore optimal performance.

3. 尽管温州的街道仍一天二十四小时充斥着载重卡车车流的轰隆声,天空的轮廓里点缀着起重机的身影,许多车间和小工厂却正闲置着,甚至干脆大门紧锁。

Though Wenzhou"s streets rumble round-the-clock with heavy truck traffic and its skyline is studded with cranes, many workshops and smaller factories stand idle and padlocked.

4. 起重机把佛吉尼亚州北部繁忙大街上的天际轮廓线弄得乱七八糟。

CRANES clutter the skyline along northern Virginia"s busy thoroughfares.

5. 为使测量机完成空间旋转曲面及3D轮廓面的测量,提出等分度测量法及等距测量法。

To complete the surface tests of 3D profile with CMM, based on tip compensation, the equiangular graduated measurement and equidistance graduated measurement are suggested.

6. 介绍了一种利用三坐标测量机与反求技术相结合,实现铸造零件复杂轮廓检测的具体方法。

This paper introduces a method, which can measure very complex profile or surface of a casting part by using three dimension coordinate measuring machine and reverse engineering technology.

7. 实验表明:轮廓特征能较好的反映人的脸部特征,用支持向量机对轮廓特征进行分类的方法来检测人脸是有效的。Www.WEntiYi.Com

Experiments show that the method reflects the features of human faces very well and using SVM to classify profile features is an effective method for detecting human face.

8. 基于主动轮廓的跟踪方法被广泛应用于移动摄像机下运动物体轮廓的跟踪。

Active contour-based tracking has been widely used for tracking contours of objects with moving cameras.

9. 以螺杆压缩机转子为例,介绍了未知螺旋面端截面轮廓及其啮合的共轭齿形求法,给出了实用计算公式。

Takes the screw type compressor rotor as an example, a calculating method of unknown section profile of spiral surface and its conjugate shape is introduced and practical formulas are given.

10. 将活动轮廓和光流模型相结合用于运动物体图像的实时跟踪,以抽取物体图像的边缘信息,并以此信息控制摄像机的运动,达到机器人定位、跟踪等目的。

A robotic visual servo control based on active contour is presented, which combines the active contour with the image optical flow for tracking image contours related to the object of interest.

11. 经过CCD摄像机像面和光切平面之间的空间映射变换及图象处理后,可一次获得被测物的某一个截面的二维轮廓信息。

D figure information of any section was also attained after spatial mapping transformation between CCD image plane and light-section plane.

12. 本文介绍采用触针式轮廓仪与通用微型机相连的表面三维形貌测量系统。

In this paper, a three-dimensional measuring system for surface asperities is described, in which a microcomputer is interfaced to a stylus profilometer.

13. 注意:在图像上方,已经被忽略的黑色轮廓线和真正的交叉阴影着色,在透视摄像机里明显地表明格子纹理已经投射在表面上。

Note that in the image above, the dark outline and true CrossHatch shading have been omitted to clearly illustrate the Perspective Camera projection of the grid texture onto the surface.

14. 目前我国的捏合块制造工艺还相对落后,捏合块轮廓曲线加工精度无法保证,大大影响了挤出机的整机性能。

At present, it"s lag in technology for kneading block manufacturing, or say, the outline precision of kneading block can not be ensured, which influences the whole property of extruders greatly.

15. 为此,本文以弧面分度凸轮的轮廓面方程为基础,建立了弧面分度凸轮的三维模型,提出了一种用三坐标测量机测量其轮廓面误差的方法。

Therefore the author built a 3-d model based on the surface equations of roller gear CAM, and presented a method of using coordinate measuring machine (CMM) to measure the surfaces of the CAM.

16. 本文着重对引进采煤机无链牵引机构的链轨截面轮廓进行分析,并对其受力进行较深入的研究。

The paper mainly analyses the chain track sectional profile of non chain drive mechanism of an importing miming machine and researches on its stress state deeply.

17. 起重机装点着中国的轮廓,将来六年里在中国盖起的摩天大楼将会超过全球总数的40%。

Cranes dot the Chinese skyline where more than 40% of the skyscrapers to be built over the next six years will be sited.

18. 测量三维曲面轮廓的传统方法是采用表面轮廓仪式或三坐标机。

Traditionally, the surface contour test instrument or three-coordinate measuring machine is used in 3-d curved surface measuring system.

19. NickHornby让我想起了岁月,他巨大的音乐收藏,于是我就用一个唱片机去表达他的轮廓。

Nick Hornby took me ages. He has a large music collection. I was thinking about using a record, the outline of it.

20. 在数控机床或加工中心上采用联机检测轮廓加工误差的方法,不用价格昂贵的坐标测量机,具有简单、省时、经济的特点。

A method of on-line measurement of contouring error on numerically-controlled machine tools or machining centers is a simple, high-speed and economical.

21. 光栅投影测量物体三维轮廓技术利用计算机生成光栅条纹,通过投影仪投射到被测物体表面,采用CCD摄像机捕获条纹图像。

The technique of 3-D profile measurement based on grating strips project, which created the strips by the computer, projected it through the projector, and captured the strips image by CCD camera.

22. 由面阵CCD摄像机摄取刀形图像,通过硬件解调电路提取刀形轮廓数据并送入计算机。

The image of tool form is taken by a matrix CCD camera. The data of tool form are collected into PC through the hardware demodulation circuits.

23. 本发明非常适合于固定区域的背景图像中提取目标轮廓,如ATM机周边环境的监控等。

The foreground extraction method is quite suitable for picking up the target contour of the background image in a fixed area, such as monitoring of the surrounding environment of an ATM and the like.

24. 本发明非常适合于固定区域的背景图像中提取目标轮廓,如ATM机周边环境的监控等。

The foreground extraction method is quite suitable for picking up the target contour of the background image in a fixed area, such as monitoring of the surrounding environment of an ATM and the like.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!