
词语导航
基本信息
词语:牙形的
繁体:牙形的
拼音:yá xíng de
英语翻译
【医】 dentelated; dentiform; dentoid
分词翻译
牙的英语翻译:
cuspid; tooth; tooth-like thing; tusk
【医】 dens; dent-; dental ivory; dentes; denti-; dento-; odont-; odonto-
teeth; tooth
形的英语翻译:
appear; body; compare; entity; form; look; shape
【医】 appearance; morpho-; shape
翻译例句
1. 可能是因为周末是万圣节的关系,上面的图片让我联想到了下面的画面。想象一下,头发不是蛇而是牙形刺的美杜莎。
It might be due to the Halloween weekend, but the above reminds me of the below image. Imagine if Medusa had conodonts instead of snakes.
2. 牙形刺生活在寒武纪的海洋中,可能以某种浮游生物为食,不过没人清楚具体情况。
Conodonts lived in the Cambrian seas, and may have eaten certain types of plankton, but no one knows for sure.
3. 牙形刺在三叠纪末期灭绝了,这正是恐龙开始演化的时代。
Conodonts went extinct at the end of the Triassic Period, about the time dinosaurs were evolving.
4. 这种叫作牙形刺的动物长有数排相互咬合的圆锥状利牙,像钉耙一样将猎物“耙”入口中。
The animals, called conodonts, possessed rows of sharp, interlocking cone-shaped teeth that raked prey into their mouths.
5. 不过,在20世纪80年代,古生物学者发现了完整的牙形刺化石标本,而直到最近科学家们才开始揭露出它们的秘密。
In the 1980s, however, paleontologists found full fossilized conodont specimens, and only recently have scientists begun to unravel their secrets.
6. 介绍了常见的用于紧固联接英寸制螺纹和用于管道连接英寸制螺纹的牙形、配合和标识,以及管螺纹的密封特点。
The tooth shape, fit and mark of clamping connection and pipe connection inch threads commonly used are introduced and their seal features.
7. 目的研究“摇椅形”弓丝对前牙开牙合畸形的矫治效果。
Objective To study the effect of the application of reverse-curve arch wire for the treatment of anterior open bite.
8. 在螺纹材料、尺寸、载荷都相同的情况下,三角形螺纹牙所受的剪应力最小,断裂载荷也比梯形螺纹和矩形螺纹高。
In the same material, dimension and load circumstance, the cut stress of the triangle thread is smallest. Its rupture load is higher than the echelon and rectangle.
9. 方法三棱滑切固定矫治器的结构,以三棱形弓丝和具有三角槽沟的托槽为主体,由它控制矫治牙在各个方向的移动而发挥矫治作用。
Methods the structure of deltoid arch wire fixed appliance is consist of deltoid arch wire and bracket with deltoid colpus. It is used to control the tooth"s moving.
10. 目的通过对40例牙龈型微笑的深覆牙合患者的治疗,探讨J形钩高位牵引的临床应用。
Objective To investigated the clinical value of J hook in higher traction by treatment of 40 gummy smile deep overbite patients.
11. 然而,这些结论是通过对高度进化的真牙形石属的研究获得的;它们在多大程度上代表了原始真牙形石还存在疑问。
However, this conclusion was based on the evidence from some highly derived euconodont taxa; the degree of their plesimophic to basal euconodonts still remains in question.wWw.WeNtiYI.CoM
12. 观察上颌前部牙槽骨内圆柱洞形扩宽后行同期人工牙种植的临床效果。
To investigate the clinical effects of dental implantation after column hole shape endosseous expansion in alveoli of anterior maxilla.
13. 本文介绍一种测量石油螺纹量规的螺旋线、中径、锥度和牙形半角的新方法及装置。
This paper describes a new method and device for measuring helical line, pitch diameter, taper and half-angle of thread of petroleum thread gauges.
14. 对江西省信丰县铁石口剖面晚二叠世长兴阶至铁石口阶下部的牙形石动物群有了新的认识。
A detailed research has been worked on the Late Upper Permian conodont fauna of Tieshikou section in Xinfeng area, Jiangxi Province.
15. 牙形刺的分布主要与平静的暖水大洋有关。
The Precordilleran conodonts are mainly related to a calm and warm-water ocean.
16. 另一方面,NPTF螺纹的设计用于保证在整个牙形上产生足够的变形以生成这种机械密封。
On the other hand, NPTF threads are designed to ensure that sufficient crushing of the entire thread form will take place to produce a mechanical seal.
17. 结论:提高烤瓷粘结桥的修复质量,需严格把握适应症和牙体预备时增加辅助固位形,同时优质粘结剂和酸蚀技术的合理应用也起重要作用。
Conclusions:Satisfac- tory results were attributed to the indication of prosthesis, supplementary retention form in tooth preparing, high-quality bonding agents and performing etching on surface oft.
18. 首次描述并图示了位于华北地台和华南地台之间的秦岭山脉中的早石炭世杜内阶上部的牙形刺。
Late Tournaisian conodonts from the Jiehejie Formation in the Qinling Mountains, situated between the North China Platform and South China Platform are first described and illustrated in this paper.
19. 本文对深海硅质岩系中这一界线地层牙形石动物群特征进行了简要的描述。
We also concisely described the characteristics of the conodont fauna through the boundary strata.
20. 英国古生物学家们通过牙形石动物的软体解剖学研究,发现眼睛、脊索、神经索、肌肉组织、尾鳍等软组织;
The soft anatomy of conodont shows some soft tissues including eyes, notochord, nerve cord, myomeres and caudal fin.
21. 加工的挤压螺纹表面有一层纤维沿其牙形连续分布。
The microstructure of the thread machined by form tapping showed a layer of fine fiber distribution along the thread profile.
22. 本文从方牙丝杠磨削的原理误差入手,分析了方牙丝杠加工的原理性误差及其对工件牙形精度的影响程度,提出了减小加工方牙丝杠原理误差的措施。
The paper analyzes machining error and its effect on the tooth profile accuracy according to the principal error, and gives the methods to diminish the error.
23. 本文考虑了非对称三角形螺纹的螺距偏差和牙侧角偏差的各种组合对作用中径的共同影响,运用了包容图位移法,分析和推导出非对称螺纹作用中径的精确计算公式。
By the use of the displacing enveloping drawing method, a set of exact formulae for calculating the virtual pitch diameter is deduced and verified by measured data.
24. 淬硬精密丝杠的牙形精度取决于精磨。
The accuracy of the tooth forms of the quenched precision lead-screws is decided by the precise grinding.
25. 淬硬精密丝杠的牙形精度取决于精磨。
The accuracy of the tooth forms of the quenched precision lead-screws is decided by the precise grinding.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
