渗氮用英语怎么说,渗氮的英文翻译


词语导航

基本信息

词语:渗氮

繁体:滲氮

拼音:shèn dàn

英语翻译

【化】 nitridation; nitriding; nitrizing

相关词条

1.nitridation  2.nitrizing  

分词翻译

渗的英语翻译:

ooze; seep

氮的英语翻译:

azote; nitrogen
【医】 Az.; azote; N; nitrogen

翻译例句

1. 渗氮时间愈长,试样的氮化量愈多。

The longer nitriding time, the more amount nitrogen pick-ups.

2. 简要介绍了离子渗氮技术的最新进展。

In this paper, the new nitriding technology was briefly introduced.

3. 一般而言两种渗氮方法的用途是类似的。

In general the USES of the two-nitriding processes are similar.

4. 针对合金化渗氮的组织性能进行了研究。

The structure property of alloying nitriding is studied.

5. 纯铁渗氮层则由化合物层和扩散层组成。

The nitrided layer of pure iron consists of compound layer and diffusion layer.

6. 牙用钛合金TC4 ,使用渗氮表面技术处理。

Titanium alloy material (TC4) samples were treated with nitriding technique.

7. 化学热处理的主要有渗碳、渗氮、渗金属的方法。

The chemical treatment main method has the cementation, Azotize, infiltrates the metal.

8. 对一种新型合金工具钢的渗氮特性进行了初步研究。

Nitrided characteristics of a new kind alloys tool steel are investigated.

9. 用透射电镜研究了稀土催渗离子渗氮层中的晶体缺陷。

The lattice defects in the plasma - nitrided layer have been studied by TEM.

10. 对渗氮层的硬度、深度和组织结构等进行了分析研究。

The microstructure, microhardness and depth of the nitrided layers were studied.Www.wenTiyi.cOM

11. 热处理:真空,渗碳,渗氮,真空热处理,超低温处理等。

Hot treatment: vacuum, carburizing, nitriding, vacuum heat treatment and cryogenic treatment etc.

12. 通过分析和试验,我们采用了抗蚀渗氮取代电镀铬工艺。

Through analysis and tests, the authors selected corrosion resistant nitrogen case-hardening process to replace chrome plating.

13. 利用介质阻挡放电进行常压氮气渗氮研究取得突破性进展。

Research on the dielectric barrier discharge nitrogen nitriding at atmospheric pressure have consumedly progressed.

14. 由于渗氮钢的合金比例,它们比普通钢更强,也容易热处理。

Nitriding steels, by virtue of their alloying content, are stronger than ordinary steels and respond readily to heat treatment.

15. 结果表明:由渗氮试样的碳浓度分布曲线可精确确定渗氮层深。

The results show that the nitriding depth was determined accurately by the carbon concentration profiles.

16. 采用脉冲式离子渗氮炉对柴油机曲轴进行了辉光离子渗氮处理。

The ion nitriding of the diesel engine crankshafts was tested.

17. QPQ技术是一种主要包括盐浴渗氮和盐浴氧化的表面处理技术。

QPQ technology is a surface treatment technology which consists essentially of liquid nitriding and liquid oxidizing.

18. 通过电化学测试方法研究了脉冲真空渗氮防腐层及裸样的抗腐蚀性能。

The corrosive behavior of Pulse Vacuum Nitriding coating and plain sample were investigated by an apparatus of electrochemical measurement.

19. 渗氮件的性能与渗氮层的化合物相组成和扩散层的微观结构密切相关。

Properties of nitrided parts have close relation to phase composition of their compound layer and microstructure of their diffusion layer.

20. 利用介质阻挡放电,在自行研制的设备上进行常压非平衡等离子体渗氮。

Using dielectric barrier discharge (DBD), atmospheric pressure non equilibrium plasma nitriding technology is under development at self made equipment.

21. 通过比较在不同渗氮温度及时间条件下的渗氮效果,制定合理的工艺参数。

This paper presents the different results on condition of varying nitriding temperatures and time. So the proper technological parameters can be decided.

22. 依据化学动力学原理和内扩散理论,研制成功了无脆性快速气体渗氮新工艺。

According to chemical dynamics principle and internal diffusion theory, a no-brittle fast nitriding method has been developed.

23. 利用液相等离子体电解渗氮技术对AISI 304不锈钢进行了渗氮处理。

AISI304 stainless steel was treated by plasma electrolytic nitriding technique in solution.

24. 研究了在不同气氛下进行离子渗氮对TC 4钛合金渗氮层的组织与性能的影响。

The effect of the atmosphere on the structure and properties of ion nitriding layer of alloy TC4 was investigated.

25. 液体氮化由于液体与工件直接传导加热,缩短了工件加热时间,提高了渗氮速度。

Because the liquid nitriding the liquid and the work piece direct conduction heating, reduced the work piece heating-up time, raised the azotize speed.

26. LDMC系列离子渗氮(氮化)设备由LD、LDMC系统电源和真空炉体构成。

LD, LDMC series Ion nitrogen (NOx) equipment from the LD, LDMC system power vacuum furnace and pose.

27. 建议对这种钢在渗氮前先机加工和热处理,因为渗氮后没有剥落并不需要更多的加工。

It is recommended that these steels be machined and heat-treated before nitriding, because there is no scale or further work necessary after this process.

28. 1986年,我们共同设计制造程序自动控制真空氮渗设备和研究真空脉冲渗氮工艺。

In 1986, we designed the procedure auto-control vacuum nitriding furnace and studied the pulse vacuum nitriding processes.

29. 1986年,我们共同设计制造程序自动控制真空氮渗设备和研究真空脉冲渗氮工艺。

In 1986, we designed the procedure auto-control vacuum nitriding furnace and studied the pulse vacuum nitriding processes.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!