
词语导航
基本信息
词语:冲压工作
繁体:沖壓工作
拼音:chōng yā gōng zuò
英语翻译
【机】 press work; press working
分词翻译
冲压的英语翻译:
pressing; punch
【计】 stamping
【化】 stamping
工作的英语翻译:
job; work; employment; labour; pursuit; task
【医】 ergo-
【经】 job; operations; task
翻译例句
1. 我捆起一簇树枝,将它栓在冲压工作台上。
I bundled a bunch of branches and anchored it on the punching bench.
2. 本机是强而有力的新设备,用于高速冲压工作,可提升冲压产品的质与量。
This powerful new equipment is developed for high speed press working, it aims at increasing the quality and quantity of pressing products.
3. 这里它将达到超音速然后超高速冲压喷气发动机切换成工作状态,迎面气流进入发动机,与燃料混合,混合物在超音速状态流过引擎。
Here it would reach supersonic speeds and then shift to its scramjet engine. The scramjet scoops up air and mixes it with fuel so it burns as the mixture flows through the engine at supersonic speeds.
4. 介绍用于碟形托盘冷冲压成形模具的结构特点及工作原理。
This paper introduces the structure characters and working principle of mould for cold stamping buttefly pallet.
5. 负责冲压件尺寸管理及问题分析、TS 16949的内、外审工作。
Responsible for stamping parts dimension management and problem analysis, ts 16949 of the internal and external audit work.
6. 在进行冲裁工艺力的计算和冲裁模工作部分的设计计算,对选择冲压设备提供依据。
Further blanking die blanking force calculation and working part of the design calculations, provide a basis for the selection of stamping equipment.
7. 介绍了固体火箭冲压发动机地面实验装置及测控系统组成、功能、技术指标和可以开展的研究工作。
The paper presents the composition, functions, technical performance and research of the solid rocket ramjet engine ground test equipment and measurement control system in detail.
8. 本次设计阐述了冲压倒装复合模的结构设计以及工作过程。
The design describes the structure of compound die stamping flip-chip design and working process.
9. 我们是制造公司处理与冲压,切割,钣金焊接工作。
We are the manufacturing company dealing with stamping, cutting, welding of sheet metal working.
10. 冲床在工作过程中辐射出的冲压噪声及其传播过程非常复杂。
The noise from punch press and its propagation is very complicated.
11. 至少5年以上的工艺或模具设计、模具制造、或冲压生产工艺技术方面工作经验。
More than 5 years process or die design, die manufacturing or stamping production process experience.
12. 超燃冲压发动机以其高速、高比冲和工作范围宽广的特点,正逐渐成为当今航空航天动力领域的研究焦点。
The scramjet has some advantages of high flow velocity, high specific impulse and wide operating range which become a viewpoint in the research field of power of Aeronautics and Astronautics.
13. 具有特殊斜面的冲压件展开尺寸计算在众多的冲压工艺书籍和模具设计手册中鲜有论述,在实际工作中是个难题。
Calculation of development size of pressing with special incline is not discussed in many press technology books and die design manuals, and it is a difficult problem in real working.
14. 在汽车厂冲压部门或大型模具厂设计、工艺部门5年以上工作经验。
More than 5 years working experience in automotive company or big-size die maker design, process department.
15. 本设计采用曲柄压力机进行冲压,因为它具有生产率高、设备维修简单、工作环境整洁等特点。
The design used the crank pressure machine for punching, which has high productivity, maintenance simple, clean working environment and so on.
16. 辅助集团公司在市区规划筹建的第二工业园其标准冲压车间的厂房布置,工作区规划;
Assisted the Group in planning and designing the workplace of the Pressing Factory in the Second Industrial Park yet to be constructed in the town.
17. 使用本实用新型是构成冲压加工机具必备的最简化形式,具有结构简单、工作可靠,制作成本低的优点。
As the simplest form necessary to form a punching processing machine, the utility model has the advantages of simple structure, reliable work and low manufacturing cost.
18. 大众所做工作:冲压车间屋顶改造质量控制。
Volkswagen Autoeuropa WORK PERFORMED: Quality control of the revision and redefinition of the Press Shop Roofing.www.weNtiyI.cOM
19. 超声速进气道的性能优劣决定了补燃室流场内的压强和空气流量,进而影响到冲压发动机的工作性能。
The performance of supersonic inlet determines the pressure and the air flux in combustor, then affect the work of ramjet.
20. 摘要:阐述了冲压连续模的结构设计及工作过程。
Abstract: the designer has expounded stamping die for the structural design and working process.
21. 包括:冲压工艺设计、排样设计、级进模结构设计及主要工作部件设计等。
Including: punching press process design, arrange kind design, grade enter mould structure design.
22. 对于相位编码脉冲压缩雷达方案,重点介绍了其工作原理和实现方法。
For the phase code pulse compression radar, the article gives emphasis to introduce its working principle and realizing method.
23. 介绍了冲压转子发动机的工作原理,提出了适用于这种发动机的切向驻涡燃烧室新概念;
The operating principle of a ramgen is introduced, and a new concept of tangential trapped vortex combustor (TTVC) used for the engine is presented.
24. 如此设计出的结构可确保模具工作运行可靠和冲压产品大批量生产的要求。
So the structure is designed to ensure reliable operation of die stamping products and mass production requirements.
25. 研讨了整体式固体冲压火箭发动机的工作原理及技术难点;
This paper discusses operating principles and technology challenges of the integral solid propellant rocket ramjet.
26. 具体工作如下:1、含有两相流的超燃冲压发动机燃油供给系统模型的建立。
The idiographic work is as follows: 1, the modeling of the scramjet fuel supply system with two phase flow.
27. 介绍了冲压万能自动分度装置,说明了其工作原理。
Introduce an omnipotence press automatism dividing device, explained it operation principle.
28. 通过对插座连接焊片结构特点的分析,确定该冲压件的排样方案,设计了一副级进模。介绍了主要工作零件及模具总装结构设计。
Through analysis of structure of the socket weld connection pieces, determined the layout project, designed a progressive die. Introduced the design points of main parts and die structure.
29. 冲压空气涡轮流场数值研究主要目的是模拟在实际高空加油工作状态下涡轮变桨距气动特性。
The aim of numerical experiment of ram air turbines is mainly to simulating its adjustable pitch aerodynamic characteristic on the actual flight refuel conditions.
30. 冲压空气涡轮流场数值研究主要目的是模拟在实际高空加油工作状态下涡轮变桨距气动特性。
The aim of numerical experiment of ram air turbines is mainly to simulating its adjustable pitch aerodynamic characteristic on the actual flight refuel conditions.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
