微合金用英语怎么说,微合金的英文翻译


词语导航

基本信息

词语:微合金

繁体:微合金

拼音:wēi hé jīn

英语翻译

microalloy

分词翻译

微的英语翻译:

decline; profound; tiny
【计】 mic-; micro-
【医】 micr-; micro-; mikro-; mu

合金的英语翻译:

alloy; metal
【化】 alloy
【医】 alloy
【经】 alloy

翻译例句

1. 研制了一种新型微合金非调质钢。

New microalloy non-quenched-tempered steel was studied.

2. 阐述了中国开发含钒微合金化钢的前景。wwW.wenTIyi.cOm

The prospects for the development of vanadium microalloyed steels in China were described.

3. 提高微合金非调质钢的强度需要改善其韧性。

Toughness of microalloyed forging steel should be improved with the increase of strength.

4. 对微合金化高锰钢衬板断裂原因进行了分析。

The fracture reasons of lining plate of microalloying high Mn steel have been analyzed.

5. 介绍了酒钢微合金高碳钢硬线轧制工艺研究。

This article presents research on rolling technology of micro-alloyed high carbon hard wire at JISCO.

6. 讨论铬微合金化对大规格高碳钢线材质量的影响。

The influence of cr microalloying on the quality of large size high carbon steel wire rod is discussed.

7. 用高碳微合金非调质钢试制了捷达轿车发动机连杆。

High - carbon microalloyed engine connecting rods for Jetta car were prepared by controlling steel metallurgy, forging process and cooling process.

8. 铌微合金化处理后高碳钢线材的力学性能得到了改善。

After niobium microalloying for high carbon steel, the mechanical properties of wire rods was improved.

9. 研究了水淬工艺对微合金双相钢组织和力学性能的影响。

Effect of water quench process on tensile properties of microalloyed dual phase (DP) steel was investigated.

10. 概述了一些常见元素在铝锂合金中的微合金化作用及机理。

This paper summarizes the microalloying mechanism and effects of some elements in Al-Li alloys.

11. 变形工艺的制定是微合金高强度钢开发和生产的关键环节。

It is the key aspect of researching and production micro-alloyed steel to draw up deformation parameter.

12. 较高的氮含量有利于提高硬线钢钒氮微合金化的强韧化效果。

Higher content of nitrogen is benefit for increasing strength and toughness for V-N micro-alloyed hard wire rods steel.

13. 对高锰钢微合金化提高耐磨性的机理及有关工艺作了详细介绍。

The mechanism that increases the wearability for microalloying of high manganese steels and the concerned processes is introduced in this paper.

14. 介绍了低成本VN微合金化高强度钢筋的研究开发及生产情况。

Research and production of lowcost VN microalloyed rebars with high strength have been reviewed.

15. 介绍了钒在低、微合金化钢中的作用以及钒微合金化钢的重点产品;

The role of vanadium in low and microalloyed steels and the main products of vanadium microalloyed steels were introduced.

16. 当温度较低的时候,微合金碳氮化物主要在位错线等晶内缺陷处析出。

At low temperature the microalloyed carbonitrides mainly precipitate at defects such as dislocation lines in grains.

17. 论述了VN元素在微合金化钢中的作用和钒钢中增氮最经济可靠的方法。

This paper introduces the function of the chemical element of VN in themicroalloyed steels and the most economic, dependable method of V steel add N.

18. 研究锡元素在微合金灰铸铁中的行为,揭示其影响铸件残余应力的机理。

The action of tin element in minute alloy cast iron were studied and its mechanisation of affect residual stress were announced in this paper.

19. 研究了含碳量和轧制工艺对低碳微合金V - N钢显微组织和性能的影响。

The effects of carbon content and rolling process parameters on microstructures and properties of the V-N microalloyed steels were studied.

20. 本文介绍了该焊丝的研究成果,分析了硼、钛微合金化埋弧焊丝高韧性机理。

In this paper research results of the wire are presented and mechanisms of high toughness of b, Ti microalloyed submerged arc welding wire are analysed.

21. 概述了钛微合金化在低合金高强钢中的工业应用进展、难点及可能的研究方向。

The developments of industrial application in HSLA steel, difficulty and potential research directions of titanium micro alloying were also analyzed.

22. 采用金相显微镜和扫描电镜分析了含铌微合金化钢铸坯角部横裂纹的形成原因。

The optical microscope and SEM were applied to analyze the formation mechanism of transverse corner cracks of Nb microalloyed steel slab.

23. B700L是宝钢生产的一种新型的低合金高强钢,其中添加了很多微合金元素。

B700L is a new type of low-alloy high strength steel, which adds a lot of micro-alloying elements, produced by baosteel.

24. 本文在实验的基础上,用热力学方法来分析讨论微合金碳氮化物复合相的形成机制。

On the basis of experiment, the forming mechanism of complex microalloyingcarbonitride has been discussed by using of thermodynamic method.

25. 本文分析了轧制温度、终冷温度、冷却速度以及微合金化对钢筋组织、性能的影响。

The influence of rolling temperature, final cooling temperature, cooling speed and micro-alloying on microstructure and properties were investigated.

26. 微观分析和成分分析结果表明,为加强钢筋的抗震性能,微合金元素应当适当调整。

The results of microstructure observation showed that the content of micro-alloying elements should be adjusted in order to enhance anti-seismic properties of steel bar.

27. 介绍将变质处理、孕育处理和微合金化技术结合使用于优质高铬白口铸铁生产的新工艺。

This paper has described the new process combined with the modification, inoculation and micro-alloyage technology in the manufacturing of high quality high-Cr white cast iron.

28. 在微合金化钢的强化机理中,第二相,主要是碳氮化物的析出强化是最重要的影响因素。

Among the strengthening mechanisms, precipitation strengthening of the second-phase, mostly carbonide and nitrides, was the brief mechanism indeed.

29. 在微合金化钢的强化机理中,第二相,主要是碳氮化物的析出强化是最重要的影响因素。

Among the strengthening mechanisms, precipitation strengthening of the second-phase, mostly carbonide and nitrides, was the brief mechanism indeed.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!