面接触用英语怎么说,面接触的英文翻译


词语导航

基本信息

词语:面接触

繁体:面接觸

拼音:miàn jiē chù

英语翻译

【化】 surface contact

分词翻译

面的英语翻译:

face; surface; cover; directly; range; scale; side
【医】 face; facies; facio-; prosopo-; surface

接触的英语翻译:

contact; contiguity; get in touch with; meet; osculate; osculation; tangency
touch
【医】 c.; contact; contiguity; hapt-; hapto-; per contiguum; taction; tactus
touch

翻译例句

1. 这是一种与你狂野的一面接触的安全方式。

This is a safe way to get in touch with your wild side.

2. 调整开式齿轮传动齿合间隙,齿面接触良好。

Adjust the opening gear transmission, the tooth contact is good.

3. 采用定转子面接触模型,实现了电机的均压运行。

Using surface contact model between stator and rotor, the pressure equalizing operation is realized.

4. 齿面接触分析结果表明失配修形后接触质量良好。

The tooth contact analysis shows that good modification effect is achieved when the method of tooth mismatched modification is used.

5. 根据该分形模型,讨论了结合面接触热阻的影响因素。

The influential factors in the resistance are discussed based on the model.

6. 用平板型保暖仪测量丝绒织物光面和绒面接触热阻的差异。

The thermal resistances of plane surface and pill surface of silk velvet are tested by thermal meter of type ASTM.

7. 闭式软齿面齿轮传动设计中,常受齿面接触疲劳强度的限制。

Designs o? The closed soft surface gear transmissions are generally restricted by the contact fatigue strength.

8. 滚动轴承。单列角面接触的球轴承。外圈非推力边的倒圆角尺寸。

Rolling bearings. single - row angular contact ball bearings. chamfer dimensions for outer ring non - thrust side.

9. 在设备安装中,要求机械钢底座与基础面接触贴切、密实、平整。

For the installation of equipments, it is required that the base of the equipment must be contacted tightly and neatly with the foundation.

10. 建立和推导了离散齿面接触分析算法,为齿面数字化测量分析提供基础。

The algorithm of disperse tooth surface contact analysis is established and deduced, which lays the foundation for the digital measure and analyzing of tooth surface.

11. 采用面-面接触模型模拟了纵波在一维岩体中的传播,给出了纵波波形;

The propagation of P-wave in one-dimensional rock masses is analyzed according to plane to plane contact model.

12. 以点—面接触为例,运用ANSYS对两长圆柱体的接触问题进行分析。

Contact problem of two long cylinders is analysed using ANSYS software.

13. 将双层式静电场描绘仪改为单层式静电场描绘仪.电极从面接触改为线接触。

Bilayer electrostalic field plotter is transformed into monolayer electrostalic field plotter. Elec tricpole is transformed from surface contact into line contact.

14. 本软件可用于数控机床进行齿轮加工,也可用于齿面接触的计算机辅助分析。

The package can be used not only for machining skew bevel gears on NC machine tools, but also for computer aided analysis of skew bevel gears contact.

15. 此种连杆与连杆盖是靠裂解面接触,不需要加工,大大降低了机械加工成本。

It"s not necessary to machine the interface of rod and cover so, manufacture cost reduction is dramatic.

16. 介绍了一种新型两相顺流介质在纤维丝上形成液膜,实现膜面接触传质的原理。

The principle was presented of the liquid films formed with the new two phase down flow medium on the fiber silk and realizing the mass transfer of film surface contact.

17. 用齿面接触分析法求解了存在制造误差时修形传动的齿面接触状态和运动精度。

The tooth contact and kinematic precision of the modified worm gearing with manufacturing errors has been investigated by the TCA method.

18. 提出一种运用基于盲源分离的共振解调技术对齿轮齿面接触故障进行诊断的方法。

A method using demodulated resonance technique based on blind source separation is developed for gear contact diagnosis.

19. 给出了考虑安装误差的齿面接触分析算法,并对齿面印痕数字化特征完成了定义。

Tooth contact analysis algorithm with consideration of alignment errors was provided, and the contact pattern digital features were completely defined.

20. 本文的方法还可用来分析优化齿面的曲率修正参数,以及误差作用下的齿面接触情况。

Also this method can be used to optimize the parameters of modified worm gear drive and analyse the contact condition under errors.

21. 利用I-DEAS软件本身的参数化设计功能,编写了摆线轮齿面接触有限元建模程序;

Modeling program of cycloid profile contact finite element was finished by use of parametric function in I-DEAS software.

22. 本文分析了三探针测试硅外延片中雪崩击穿时耗尽层宽度的面接触模型,理论和实验结果吻合。

In this paper, the area contact model of depletion layer width under avalanche breakdown in Si epitaxial wafer by a three-probe method is analysed. The theory accords with experimental results.

23. 文章采用有限元接触计算方法,计算了螺旋锥齿面接触应力和齿根弯曲应力以及齿面接触合力。

In the thesis, the contact stress, bending stress on the root and the contact force on the tooth have been calculated by Finite Element Method (FEM).

24. 压力弹片与自耦式电阻卡对应,具有至少三个触点与轨道的触面接触,并自带可调端连接部分。

A pressure spring are matched with the auto-resistance card, and has at least three contacts touching the contact faces of the tracks, and is provided with an adjustable end connection part.

25. 在机构强度分析中,阐述了凸轮-针轮副啮合齿面接触强度、针齿销的弯曲强度计算和刚度计算。WWw.WENtIyI.coM

Not only the contact strength between the CAM and the rollers is discussed, the flexural strength and rigidity of the rollers are also discussed.

26. 本文在第一次包络的基础上,着重进行了二次包络齿面接触分析,推导出了蜗杆和蜗轮齿面方程。

On the basis of the first envelope, the paper stresses on the tooth contact analysis of the second envelope, and the equations of a worm and a wormwheel flanks are derived.

27. 本文在第一次包络的基础上,着重进行了二次包络齿面接触分析,推导出了蜗杆和蜗轮齿面方程。

On the basis of the first envelope, the paper stresses on the tooth contact analysis of the second envelope, and the equations of a worm and a wormwheel flanks are derived.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!