
词语导航
基本信息
词语:要求要点
繁体:要求要點
拼音:yào qiú yào diǎn
英语翻译
【法】 points of claim
分词翻译
要求的英语翻译:
demand; desire; ask; challenge; claim; mandate; postulate; request; require
【计】 claimed
【化】 requirement
【医】 demand
【经】 call; postulation; request; requisitioning; solicit
要点的英语翻译:
essentials; gist; key strongpoint; main points; nub; point; quick
【计】 important
【医】 postulate
【经】 key point
翻译例句
1. 要求你的客户列出合同交易的要点,也可以说是合同的清单、目录或概述。
Ask your client to list the deal points. This can be in the form of a list, outline or narration.
2. 要点:今后一段时间,对遗留协议和文件的支持可能要求接受utf - 8之外的字符集和编码,但是如果必须如此我会非常小心。
Bottom line: Support for legacy protocols and files may require acceptance of character sets and encodings other than UTF-8 for some time to come — but I"ll hold my nose if I have to do it.
3. 老师要求我把演说的要点记下来。
The teacher asked me to note down the main points of the speech.
4. 一些已经被简化了,仅仅用来论证要点和要求的观察保密性。
Some have been simplified to demonstrate essentials only and observe confidentiality as required.
5. 要求你的客户列出合同交易的要点,也可以说是合同的清单、目录或概述。
Ask your client to list the deal points.This can be in the form of a list, outline or narration.
6. 我很着急,要求他直接说到要点上来。
As I was in hurry, I asked him to come to the point at once.
7. 本文阐述了办公建筑各智能化系统的设计要点,提出各系统在办公建筑中的设置要求。
The paper expounds the design point of intelligent systems for office buildings, and puts forward the setting requirements for each system in office building as well.
8. 本文介绍了EPS复合式保温技术的构造、材料要求、不同的固定方法和质量控制要点。
The construction, requirement of material, fixing methods and the keypoint of quality control of EPS compound heat preservation technology are introduced in this paper.
9. 结合工作实践对电缆制造和生产过程的要求和控制要点进行讨论。
Requirements and key control of the cable manufacturing process are discussed based on the work practice.
10. 数控加工在模具制造中占据重要地位。根据数控编程的要求,提出有关模具数控加工的工艺分析要点。
NC-machining possessed the important position in mould manufacture. The point of process analysis based on the requirements of NC - programmed manufacture are given.
11. 介绍了京珠高速公路大悟南段路基石方爆破的基本操作方法、技术要求和基本要点,以及应采取的安全措施。
The basic operation methods, technical requirements, basic main point, and safety measures which should be adopted in Dawu southern section of Jingzhu Expressway are introduced.
12. 介绍了植鞣绵羊正面服装革的质量要求和试制过程中的若干技术要点。
The quality requirements and the key technologies for production of vegetable tanned sheepskin garment grain leather were introduced.
13. 阐明了聚合反应对搅拌装置的要求及设计要点。
Requirements and key design points of polymerization for mixing unit were clarified.
14. 本文详尽地介绍了雷达液位计的工作原理及特性,测量系统的组成,选型要求和安装要点等。
The paper elaborately introduces the working principle and characteristic of the radar fluid-level meter, the composition of the survey system, type selection requirement and installed essentials etc.
15. 论述监理工程师必须加强施工安全管理,重点叙述施工安全控制要点、要求及措施。
The article expounds the fact that management Engineers must strengthen the construction safety management narrate the main points, requirement and measures during the secure construction.
16. 介绍JFB1513汽车交流发电机的性能要求、基本原理、设计要点以及实施结果。
The performance requirements, ultimate principle, main design points and implementing results of the JFB1513 automobile A. C. Generator is introduced in this article.
17. 说明了中式产品塑盒装走油蹄的工艺流程和配方,着重阐述了其工艺操作中的技术要点和产品质量要求。WwW.WEntIYI.CoM
The formula and processing technology of box-packaged Chinese-style oiled trotter are de-tailed. Emphases are laid on the technical points and quality requirements for this product.
18. 本文在分析干切削加工对刀具要求的基础上,阐述了干切削刀具设计的要点。
After making an analysis of requirements for tools used in dry machining, the main points in the design of cutting tools for dry machining are ex-pounded.
19. 介绍了晶纹镀锡中重熔工序的操作要点和安全要求。
Operating hints and safety requirement of re melting in crystal pattern tin plating were introduced.
20. 本文对两种雏鸡罐头的工艺流程,操作要点,质量要求作详细阐述。
The technology process the operational points and quality requirements or the two kinds of phasianus colohicus linnaeus can are detail de-sciped in the article.
21. 从水池的结构形式、水池的荷载、水池的计算模型、荷载组合及内力计算、水池构造要求几方面分析了水池设计的要点。
It analyzes the design elements of the pool from several aspects including the pool structure, load, computing model, load combination and internal force calculation and structural requirements.
22. 阐述了实验室质量体系编写的要求和要点,结合本检测实验室实际,制定了检测实验室质量手册。
The article explains the requirements and essentials of writing laboratory quality system. According to the practice of the test laboratory, the test laboratory quality manual is completed.
23. 本文以金属氟碳漆为例,较详细介绍了施工技术要求及验收要点。
This text is taking Fluorine carbon paint of the metal as example, Have introduced the specification requirement of construction technology and confirm the main point in detail.
24. 通过多年的工程实践,总结桥面标高施工要点,从而达到控制质量的要求。
Through many years" practice, the paper discussed the main points of bridge deck elevation construction for controlling quality.
25. 本文在此从施工要求出发,提出了实际施工过程中应该主要的几个要点。
This paper from the requirements of construction, and puts forward some key points should be the actual construction process.
26. 介绍了铬鞣黄牛正面服装革的质量要求及试制过程中的若干技术要点。
The quality requirements and the key technologies for the production of chrome - tanned cattle grain garment leather are introduced.
27. 根据大气环境影响评价工作的分级要求,提出了针对性的工作要点,以满足大气环境评价工作的需要。
Based on different tasks for different grades of EIA of atmosphere, different work points for bettering EIA are summarized in this paper.
28. 介绍了一种风电场用变压器的技术要求、特殊设计要点及样机试制情况。
The technical requirements of transformers in wind power plant is introduced. The special design and prototype trial-production are presented.
29. 介绍了一种风电场用变压器的技术要求、特殊设计要点及样机试制情况。
The technical requirements of transformers in wind power plant is introduced. The special design and prototype trial-production are presented.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
