基体钢用英语怎么说,基体钢的英文翻译


词语导航

基本信息

词语:基体钢

繁体:基體鋼

拼音:jī tǐ gāng

英语翻译

【化】 matrix steel; matrix steelswww.wEnTiYi.Com

分词翻译

基的英语翻译:

base; basic; foundation; key; primary; radix
【化】 group; radical
【医】 base; basement; group; radical

体的英语翻译:

body; style; substance; system
【计】 body
【医】 body; corpora; corps; corpus; leukocytic crystals; scapus; shaft; soma
Somato-

钢的英语翻译:

steel
【化】 steel
【医】 steel

翻译例句

1. 介绍了基体钢粉牌号和各种添加剂的数量与类型对生坯与烧结件性能的影响。

The influence of base ste el powder grade and the amount and type of various additives on the green and sintered properties is presented.

2. 分析了基体钢(6422钢)滚刀实体分别经连续冷却和等温冷却热处理后的显微组织和形貌。

The microstructure and morphology of matrix steel (6422) cutter with continuous cooling and isothermal cooling heat treatment were studied.

3. 通过含铌与不含铌基体钢气体软氮化工艺对比实验,初步探索了合金元素铌对基体钢软氮化渗层组织与性能的影响。

This paper has investigated the influence of alloying element Nb on structure and properties of the soft nitriding layer by means of experiments of the matrix steels containing Nb and Nbfree.

4. 介绍挤拉成型玻璃钢高低杠杠面所用原材料、基体配方及产品性能,确定了该产品的工艺参数。

The raw materials, matrix formulations and product properties were introduced for the pultrusiened FRP bars of asymmetric bars, and the technical parameters of the product determined.

5. 本试验结果还说明,在一些磨损条件下,高速钢中一次碳化物对耐磨性的影响不是主要的,基体性能可以起到更大的作用。

It may also be inferred that under certain wear conditions, it is not primary carbides but matrix properties which play major role in the wear resistance of HSS.

6. 介绍了基体采用45钢,表面喷涂工程陶瓷的旋塞阀芯的研制情况。

The development of the ceramic coat plug valve core which substrate USES 45 steel is introduced.

7. 本研究利用自制的纳米尺寸的硫化亚铁颗粒作为等离子喷涂的喂料,在钢基体表面制成了纳米硫化亚铁自润滑涂层。

In this paper, the nano iron sulfide plasma spraying feedstocks were made by oneself and the nano self-lubricating coatings on the steel were fabricated by plasma spraying.

8. 该产品以铜基、铝基或POM为基体,配以优质钢球,按一定的角度和密度有序地排列,采用特殊工艺加工而成。

It"s a copper or aluminium or POM being produced through special workmanship, on which the high quality rollers are arranged orderly in certain Angle and density.

9. 采用SP0806AS中频磁控溅射镀膜机,在硅(100)和高速钢基体上,采用双石墨靶在不同功率下沉积了类金刚石薄膜。

Diamond-like carbon DLC thin films were deposited onto si 100 and high speed steel substrates by mid-frequency magnetron sputtering system SP0806AS, Beijing Power tech Co.

10. 采用电弧喷涂方法在Q 235钢基体上喷涂铝涂层,并用正交设计的方法对工艺参数进行了优化。

Aluminum coatings were sprayed onto the substrate of steel Q235 by arc spraying method and the processing parameters were optimized by orthogonal experimental design.

11. 根据扩散理论和高速钢加热过程中基体的含碳量变化规律,对复合板材热加工过程中碳的迁移进行了讨论。

The diffusion of carbon in hot working process of cladding sheet is analyzed based on diffusion theory and variations of carbon concentration in the high-speed steel matrix.

12. 铁素体基体中氮含量超过0.08%以上(质量分数)或奥氏体基体中氮含量超过0.4%(质量分数)以上的钢称为高氮钢。

The steels contain more than 0.08 % (mass percent) nitrogen in a ferritic matrix or more than 0.4 % (mass percent) nitrogen with an austenitic matrix were defined as high nitrogen steels.

13. 采用电阻加热式真空蒸镀法在玻璃、H 13钢、塑料和纯铜基体上镀制铝膜,并对其附着力进行了测试和分析。

Aluminum film is produced on glass, H13 steel, plastic and pure cu substrate by resistance heating vacuum evaporation, and the adhesive power of aluminum film is determined and analyzed.

14. 玻璃钢拉伸强度主要取决于玻璃布经纬向的玻璃纤维和基体树脂的性能以及两者之间的组合状态。

GRP tensile strength mainly depends on warp and weft fibers in woven cloth, property of matrix resins and their combination.

15. 进行了高温烧结法在钢基体的表面上制备钛铁合金涂层的新工艺研究。

A new technology for preparation of Ti-Fe alloy coating on the steel substrate was investigated by high temperature sintering method.

16. 准贝氏体是高强度超级钢的一种理想的基体组织。

Meta bainite is also a desirable matrix for development of high strength ultra grade steel.

17. 前言:采用焊条电弧焊工艺方法,选用C HR322堆焊焊条在Q235钢基体上以不同的焊接电流进行了堆焊试验。

Surfacing process test is made on Q235 steel substrate by shielded metal arc welding process using electrode CHR322 at different welding current condition.

18. 研究了在耐酸不锈钢基体上采用激光熔覆和等离子喷焊两种工艺形成的涂层对耐腐蚀性的影响。

The effect of coating on anti corrosion has been studied, which is formed by laser cladding and plasma spurt welding on metal base of anti acid stainless steel.

19. 最后,在钢基体相中形成的裂纹以“搭桥”方式将其前后的裂纹连接起来。

At last the crack that it has formed in the steel based phase connects back and forth cracks of it by bridging.

20. 选用三种不同碳、铬含量的耐磨钢,通过热处理获得不同数量的二次碳化物和马氏体基体。

The effects of varying the amount of secondary carbide on the character of matrix under three-body abrasion of wear resistant steel have been investigated.

21. 当裂纹在钢基体相中孕育时,另一裂纹已在该钢基体相区前沿的硬质相中形成。

Another one has already formed in the hard phase in front of the steel basic phase when a crack incubates in the steel basic phase.

22. 重点探讨了刀具的磨损和失效机理、适宜切削不锈钢的涂层刀具基体和涂层的种类及特性。

The wear and failure mechanisms of the tools, the varieties and characteristics of the substrates and coatings of the tools suitable for cutting stainless steel are mainly studied.

23. 用等离子体浸没离子注入与沉积(PIIID)复合强化新技术在AISI52100轴承钢基体表面成功合成了硬而耐磨的氮化钛薄膜。

Titanium nitride(TiN) hard protective films were fabricated on AISI52100 bearing steel surface employing plasma immersion ion implantation and deposition(PIIID) technique.

24. 用料浆喷涂法在Q235钢基体上成形覆层坯体;

The green body was formed by slurry spray method on the Q235 steel substrate.

25. 采用堆焊焊条CHR322,在A 3钢基体上以不同的焊接工艺进行手工电弧堆焊试验。

Surfacing process is conducted on the substrate of steel A3 by shielded metal arc welding process using electrode CHR322 under different welding current conditions.

26. 本文主要论述基板负偏压与A 3钢基体磁控溅射离子镀铝膜相组成的关系。

This paper mainly deals with the relationship between negative bias of substrate and component phases of magnetron-sputtering ion plated aluminium film of A3 steel.

27. 研究了以硫酸和草酸为支持电解质的苯胺溶液中,苯胺在不锈钢基体上的聚合电位以及这两种聚苯胺膜层的红外光谱。

The polymerization potential and the IR spectra of polyaniline deposited on stainless steel in sulfuric acid and oxalic acid solutions were investigated.

28. 针对硬质合金在钎焊冷却过程产生很大的热应力而导致钎焊裂纹这一问题,采用有限元分析方法对硬质合金圆环与钢基体钎焊时冷却过程中的残余应力的分布情况进行模拟。

Aiming at brazing crack induced by thermal stress during the process of brazing, finite element method was used to analyze the residual stress of joints between the cemented carbide cirque and steel.

29. 本研究成功地解决了胎体与钢基体结合强度、同心度及金刚石掉块等关键技术问题。

The key technical problems of the bond strength between the matrix and steel body, the concentricity and diamond segments sealing off from the body are successfully resolved in the studies.

30. 研究了两种基体的亚共析钢经激光处理后,其硬化层的硬度梯度及其磨损特性。

The hardening gradient and the character of abrasion in hardening layer of hypoeutectoid steel with two kinds of matrixes that was treated by laser beam have been studied.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!