脱机作业用英语怎么说,脱机作业的英文翻译


词语导航

基本信息

词语:脱机作业

繁体:脫機作業

拼音:tuō jī zuò yè

英语翻译

【计】 off-line job

分词翻译

脱的英语翻译:

doff; escape from; miss out; pull off; take off
【医】 de-; des-

机的英语翻译:

chance; crucial point; engine; machine; occasion; organic; pivot; plane
flexible
【医】 machine

作业的英语翻译:

exercise; operation; production; school assignment; task; work
【计】 job
【经】 operations; perform

翻译例句

1. 为此,单击“文件”菜单上的“脱机作业”。

To do this, single click "off-line work" on "file" menu.

2. 这个示例使用 “at”调度程序在特定的日期和时间向假脱机程序提交作业。

This example uses the "at" scheduler to submit a job to the spooler at a specific date and time.

3. bsh作业队列现在可以在每个可用的设备上处理一个假脱机的作业:如果有两个可用设备,就可以同时处理两个作业,每个设备一个作业。

The BSH job queue now allows a spooled job to be processed on each available device; if two devices are available, then two jobs can be processed simultaneously, one on each device.

4. 备份处理作业应该安排在所有夜间处理作业完成之后运行,所以它们是假脱机队列中最后一个作业。

Back-up processing jobs should be scheduled some time after all overnight processing jobs so they are the last job in the spooler queue.

5. 作业在假脱机程序中排队,一个作业完成之后,下一个作业就会开始。

Since the jobs are queued on the spooler, as soon as one job completes, the next job starts.

6. 作业假脱机就可以提供这种解决方案。

This is where job spooling can provide a solution.

7. 所以,即使把50个作业都安排在23:00运行,由于采用了假脱机机制,它们会连续地逐一运行。

So, even if 50 jobs are scheduled to run at 23:00, since they are spooled, they run sequentially one at a time.

8. 他们可以把作业安排在任何时候运行,只要把作业发送给作业假脱机程序,就会逐一执行每个作业。

They can schedule the jobs to run at any time, as long as they send them to the job spooler, which will single thread each job through the spooler.

9. 在有多个作业队列的系统上,对连续作业处理进行假脱机要求把所有作业转发到同一个作业队列设备。

Spooling sequential job processes on a system with multiple job queues requires that all jobs be directed to a single job queue device.

10. 多个来源可以生成系统部署请求,作业假脱机程序接收它们(排队)。

System deployment requests can be generated by multiple sources and accepted (queued) by the job spooler.

11. 可以根据需要在作业队列中添加任意数量的队列设备,从而高效地利用系统资源,同时维持可控的假脱机环境。

As many queue devices can be added to the job queue as needed to efficiently utilize the system resources, while maintaining a controlled spooling environment.

12. 下面给出一个使用AIX作业假脱机程序执行批作业的简单示例。

A simple example of using the AIX job spooler for executing batch jobs is shown below.

13. 然后,作业假脱机程序每次处理一个排队的请求。

These queued requests are then processed one at a time by the job spooler.

14. 如果有可用的系统资源,可以创建多个作业假脱机,这样就可以通过假脱机程序同时处理多个作业。

If system resources are available, additional job spools can be created to allow multiple jobs to be processed simultaneously through the spooler.

15. 通过使用上面的作业假脱机概念,系统管理员就不再需要判断每个夜间批作业对系统施加的负载。

By using the above job spooling concepts, the systems administrator can be relieved of the duty of determining the load placed on the system by each overnight batch job.

16. 注意,如果启用AIX作业假脱机程序,那么系统上的任何用户都能够向作业假脱机程序提交进程。

If you choose to enable the AIX job spooler, be aware that any user on the system will be able to submit processes to the job spooler.

17. 注意,有多个作业处于RUNNING状态;每当一个作业完成时,一个QUEUED作业就转移到作业假脱机设备队列中并执行。

Notice that multiple jobs are in the RUNNING status and as each job completes, a QUEUED job is moved to the job spool device queue and executed.

18. IBMAIX作业假脱机程序是所有AIX系统上非常有用的内置实用程序,但是用户很少启用或使用它。

The IBM AIX job spooler is a very useful built-in utility on all AIX systems but is rarely enabled or utilized.

19. 在现代数据中心环境中,作业假脱机程序的用途更广泛。

In the modern data center environment, the need for a job spooler is greater than ever.

20. 如果使用多个作业假脱机,而且对备份作业进行假脱机,那么就无法确保在备份作业开始之前完成所有其他作业。

Recognize that if you use multiple job spools and spool your back-up job, you cannot be assured that all other jobs will be complete before the back-up job is started.

21. 通过使用AIX作业假脱机程序,可以同时提交所有不连续的夜间批作业,因为假脱机程序会按照提交次序每次运行一个作业。

Using the AIX job spooler, all overnight non-sequential batch jobs can be kicked off at the same time because the spooler runs each job one at a time in the order they were submitted to the spooler.

22. AIX作业假脱机程序让管理员和用户能够提交多个作业,然后每次处理一个作业。

The AIX job spooler is a utility that provides a mechanism for administrators and users to submit multiple jobs and then process each job one at a time.

23. AIX作业假脱机程序集成在队列守护进程中,队列守护进程也控制打印机。

The AIX job spooler is integrated into the queue daemon, which is the same queue daemon that controls the printers.

24. 如果希望删除第二个作业假脱机程序队列设备,从而每次只执行一个作业,那么运行以下命令。

If you wish to remove the second job spooler queue device so that only one job at a time is executed, run the following commands.

25. 需要连续处理的作业可以通过cron提交给作业假脱机程序,每个作业间隔一分钟。

Jobs that require sequential processing can be submitted to the job spooler through cron by running each job one minute apart.

26. 在构建要提交给作业假脱机程序的shell脚本时,在脚本中定义PATH环境变量常常是一种好做法。

When building shell scripts to submit to the job spooler, it is usually a good idea to define the PATH environment variable inside the script.

27. 同时向作业假脱机程序队列和at作业调度程序提交作业需要一个复合命令。

Submitting a job to the job spooler queue and to the at job scheduler simultaneously requires a compound command.

28. 运行以下命令创建一个shell脚本,以它为例演示跨多个作业队列设备的作业假脱机

To create a shell script to use as an example for demonstrating job spooling across multiple job queue devices, run the following commandsWWw.WEntIYi.COm

29. 在默认情况下,作业假脱机程序队列bsh是禁用的。

Normally the job spooler queue BSH is disabled by default.

30. 在默认情况下,作业假脱机程序队列bsh是禁用的。

Normally the job spooler queue BSH is disabled by default.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!