齿钻用英语怎么说,齿钻的英文翻译


词语导航

基本信息

词语:齿钻

繁体:齒鉆

拼音:chǐ zuān

英语翻译

【医】 dentate bur

分词翻译

齿的英语翻译:

tooth; tine
【医】 dens; dent-; dentes; denti-; dento-; odont-; odonto-

钻的英语翻译:

bore; dig into; drill; get into; jewel
【医】 bur; burr; buur drill; dental drill; drill; drilling
【经】 bitwww.wENTIyi.com

翻译例句

1. 激光焊接薄壁钻头的显著特点是钻齿焊接强度高,不掉齿,可以用于无水干钻,便于实现大批量规模化生产。

Laser welding thin wall bit is characterized by high welding strength of bit teeth, no falling out of the teeth and mass production by non water dry drilling.

2. 在地层、钻井参数和钻头新度相同的情况下,钻头机械钻速的快慢主要取决于钻头齿面结构是否合理。

While drilling in the same formation with the same drilling parameters, the penetration rate of bits of the same degree of wear depends mainly on their cutting structures.

3. 分析了因模具结构造成钻齿类合金压坯分层的原因,提出了改进模具结构设计的措施。

Analysis is made of the reasons of layering in compact of drill tooth alloys due to the die structures. Measures are taken to improve the die structures.

4. 定钻压、定转速条件下的单切削齿磨损速度试验结果表明,切削齿的线磨损模式是正确的。

On the basis of analyzing cutting mechanisms of cutters, a linear wearing speed model is established by researching the abrasive law of cutters.

5. 主要用于刃磨铣刀、铰刀、拉刀、盘形车刀、插齿刀及扩孔钻等。

Mainly Renmo milling cutter, reamer, pulling knives, plate-shaped lathe tool, knife inserted teeth and bore drilling.

6. 经现场使用试验证明,本研究所制备的具有梯度结构的硬质合金顶锤、涂层刀片以及硬质合金钻齿的使用性能均明显优于常规均匀结构的硬质合金。

Practical tests show that the performance of cemented carbide anvils, coated blade and drill bits with graded structure developed in this dissertation are superior to those with regular structure.

7. 论述了转子叉形齿叶根销孔加工用钻模的设计方法及制造时关键要点。

This paper gives the design method and key point during machining of pin holes on rotor for the fork-type blade root.

8. 产品特性表。第86部分:钻,埋头钻和带分度镶齿的铰刀。

Tabular layout of article characteristics - part 86: drills, counter sinking and reaming tools with indexable inserts.

9. 根据螺杆钻具转子加工时与铣刀的相对位置,建立空间螺旋齿面坐标系和铣刀坐标系。

According to the relative position of the rotor of the screw motor and the milling cutter, the coordinates of the helical tooth form and the cutter are-established.

10. 分析了因模具结构造成钻齿类合金压坯分层的原因,提出了改进模具结构设计的措施。

Analysis is made of the reasons of layering in compact of drill tooth alloys due to the die structures.

11. 本实用新型的技术方案是:包括钻体和钻头,其特征是在钻头上固定设有 钻齿。

The technical proposal of the utility model comprises a drill body and a drill bit. The utility model is characterized in that bit teeth are arranged on the drill bit.

12. 试验结果表明,钻头的机械钻速与传动比、齿面结构、岩石性质及钻井参数有密切的关联,为改进这两种钻头的设计提供了重要依据。

The test result shows the penetration rate of the bit is closely related to the transmission ratio, cutter teeth structure, rock character and drilling parameters.

13. 该钻头是在钻体的下端焊接着有一定耐磨性合金包镶金刚石的钻齿,上端焊接着钻柄。

The diamond drilling teeth covered with antiwear alloy are welded to the lower end of drilling body and a triangular drilling shank is welded to the upper end.

14. 瑞钻牌旋挖齿,可与宝俄、卡特、三一、宇通、福田雷沃、中联重科等各种旋挖钻机配套。

Our "Ruizuan"brand rotary bits can be suitable for Bauer, Cat, Sany, Yutong, Foton Lovol and Zoomlion machines.

15. 瑞钻牌旋挖齿,可与宝俄、卡特、三一、宇通、福田雷沃、中联重科等各种旋挖钻机配套。

Our "Ruizuan"brand rotary bits can be suitable for Bauer, Cat, Sany, Yutong, Foton Lovol and Zoomlion machines.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!