
词语导航
基本信息
词语:共电路
繁体:共電路
拼音:gòng diàn lù
英语翻译
【计】 cocircuit
分词翻译
共的英语翻译:
altogether; common; general; share; together
【医】 sym-; syn-
电路的英语翻译:
circuit; circuitry
【计】 electrocircuit
【化】 circuit; electric circuit
【医】 circuit
翻译例句
1. 共集-共基组合放大电路具有更好的宽带放大特性。
The CC-CE combined amplifier has the nicer wide band magnifiable characteristic.
2. 设备设计师能通过审慎地选择输入输出级电路的拓扑和共模阻抗来最小化失配或“非平衡”的效应。
Equipment designers can minimize the effects of these mismatches or "unbalances" through judicious choices of input and output stage circuit topologies and common-mode impedances.
3. 低温共烧陶瓷(LTCC)技术是实现微波电路与系统小型化、高密度的重要组装和互连技术。
Low temperature co-fired ceramics (LTCC) becomes an important packaging and interconnecting technology for realizing microwave circuit and system"s miniaturization and higher density.
4. 数字控制电路负责控制洗衣机的工作过程,主要由AT89S51单片机、两位共阴数码管、按键、蜂鸣器、LED指示灯组成;
Digital control circuit takes charge of controlling the working course. it consists of AT89S51, double-figured common-cathoded numeral display, buttons, buzzer, LEDs.
5. 该控制系统的优点是电路简单,位置检测准确,免受噪声和共模干扰影响,调速范围增加。
It features with simple circuit, accurate position detection, immunity from noise and common mode disturbance and wide speed scope.
6. 但最根本的应该是在印刷电路板设计、元器件布置和连接线的安排上下功夫,抑制共模骚扰源的产生。
But most attention should be put on the PCB design, elements position and line connection, which can suppress the source of the common mode disturbance.
7. 共集-共基组合放大电路具有良好的宽带放大特性,既可以作为缓冲级又能够提供一定的电压和电流增益。
The CC-CE combined amplifier has the nicer wide band magnifiable characteristic qua the buffer and gives some gains in voltage and electric current.
8. 多层共烧氮化铝陶瓷是采用厚膜印刷的方式将多层的电路金属化做入氮化铝基板并在特定气氛中高温烧结的一种高性能陶瓷。
Multilayer co-fired AlN ceramic is a type of high performance ceramic that is printed in thick film to form multilayer circuit and fired in a certain atmosphere in high temperature.
9. 该带隙电压基准源电路中的深度负反馈运算放大器为低失调、高增益的折叠型共源共栅运算放大器。
A deep negative feedback operation amplifier used in band gap reference is a common source and gate folded cascade operation amplifier with a lower offset voltage and a higher gain.
10. 为提高放大器的抗干扰性能,放大器电路采用共模抑制能力很强的差模输入方式。
For improving the anti-interference ability of the amplifier, the Differential Mode input with high common mode restraining technology is adopted in amplifier circuits.
11. 方法①提高整体电路共模输入阻抗以消除皮肤接触阻抗匹配失衡;
Methods High common mode input impedance of the circuit is used to remove the interference due to imbalance electrode impedance.
12. 在平衡电路中,节点处奇次谐波流过差分路径。偶次谐波流过共模路径。
In any balanced circuit, odd harmonics circulate in a differential path, while even harmonics flow in a common-mode path.
13. 主放大器采用开关电容共模反馈电路在获得大输出摆幅的同时降低了功耗。
Used the switched capacitor Common Mode Feedback circuit(CMFB) in main amplifier to achieve a large output voltage swing and decrease the static power consumption at the same time.
14. 设计了一个测量放大器电路,它由差动放大电路、共模抑制电路、双端单端转换电路和程控增益放大电路组成。
A measurement amplifier circuit is designed, which consists of circuits of differential amplifier, a common-mode rejection, double-end and single-end conversions and programmed gain amplifier.
15. 为了提高前置级的共模抑制能力,采用了共模信号的抑制电路—右腿驱动和浮地跟踪。
The design adopts the circuit for constraining the in-phase signal, in order to improve the system"s CMRR.
16. 其设计特点是采用了共源共栅电流镜,运放的输出作为驱动的同时还作为自身的偏置电路;其次是采用了带隙温度补偿技术。
The cascade current mirror was used in the circuit, and the output of the OPAMP was used for the bias of itself and to drive the next stage.
17. 通过优化共轨喷油器液力参数和电磁阀高压驱动电路,改善了高压共轨系统的响应特性。
The response characteristics of the common rail system are improved by optimizing the hydraulic parameters of the injector and the driving circuit of its solenoid.
18. 利用传感器等效电路,分析了共模干扰造成传感器零点变化的实质。
The essential characteristics of transducer zero-excursion caused by common-mode interference are approached by means of a transducer equivalent circuit.
19. 共模噪声是高速数字电路产生电磁干扰的主要原因,而共模电感又是共模噪声大小的决定因素。
Electromagnetic interference (EMI) in high-speed digital circuit is mainly generated by Common-mode (CM) noise, and the CM inductance is responsible for CM noise magnitude.
20. 在带宽限制放大器电路的设计中使用了全差分运放结构,能有效抑制电路的共模噪声。
A fully differential operational amplifier is introduced in the design of wideband limiting amplifier which can restrain the common noise effectively.
21. 截止频率是影响共发射极、共基极和共集电极电路频率特性的重要因素。
Cut off frequency is the main factor influencing frequency properties of electrode circuits of common emitter, common base and common collector.
22. 因此介绍了一种采用自偏置低压共源共栅电流源的带隙基准电路结构,用两个电阻代替了偏置电路。
This paper introduces a low supply voltage band -gap reference circuit which used a self-bias cascode current mirror.
23. 电路模拟证明这种简单结构具有很高的共模电压输入范围和很低的谐波失真。
This simple structure is proved through the SPICE simulation to have the very high common mode input voltage excursion and low harmonious distortion.
24. 对锑化铟-铟共晶薄膜磁阻元件的齿轮转速传感器电路进行了研究。Www.WEntiyI.COM
The gear velocity sensor made up of a InSn-In eutectic film magnetoresistor(MR) is studied.
25. 共模反馈电路由开关电容共模反馈电路实现。
Auxiliary feedback amplifiers and switched capacitor common mode feedback circuit are employed.
26. 电路运用带隙温度补偿技术,采用共源共栅电流镜,两级运放输出用于自身偏置电路。
The technology of temperature compensation and cascade current mirror was used, and the output of two stage amplifier was used for the bias of itself.
27. 电路见图5,这种电路在运算电路中相当有用,比如差分对单端的转换,抑制共模信号。
This circuit is shown in Figure 5 and is useful as a computational amplifier, in making a differential to single-ended conversion or in rejecting a common mode signal.
28. 对于输入电路,则按照最大增益的原则使源阻抗与输入阻抗共扼匹配;
The input impedance is matched conjugately to the source impedance according to the maximization gain.
29. 而在新设计的灯中,Lumileds公司采用了18个红色led光源,包括电路损失在内,共耗电14瓦,即可产生同样的光效。
In the light of the new design, Lumileds companies have 18 red led light source, including the loss of circuit, a total power consumption of 14 watts to generate the same optical effect.
30. 而在新设计的灯中,Lumileds公司采用了18个红色led光源,包括电路损失在内,共耗电14瓦,即可产生同样的光效。
In the light of the new design, Lumileds companies have 18 red led light source, including the loss of circuit, a total power consumption of 14 watts to generate the same optical effect.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
