词语导航
基本信息
词语：疲劳热
繁体：疲勞熱
拼音：pí láo rè
英语翻译
【医】 fatigue fever
分词翻译
疲劳的英语翻译：
fatigue; prostration; tire; tiredness; wear out; weariness
【化】 fatigue
【医】 defatigation; fatigue
热的英语翻译：
ardent; caloric; craze; eager; fever; heat; hot; warm
【化】 heat
【医】 calor; cauma; febris; fever; fievre; heat; hyperthermia; hyperthermy
phlegmasia; phlegmonosis; pyreto-; pyro-; therm-; thermo-
翻译例句
1. 中国的创业热远远没有“疲劳”，一切才刚刚起步。
Far from being "fatigued," it appears the China start up boom is only just beginning.
2. 疲劳渐渐变成了精疲力竭，还伴随着头痛和潮热。
Fatigue turned to exhaustion, joined by headaches and hot flushes.
3. 因此，考虑热老化对材料性能的影响可能得到更准确的疲劳寿命预报。
So considering thermal aging effect to rubber may give an accurately result to predict the fatigue life.
4. 中暑症状：头痛、肌肉痉挛、疲劳乏力、头晕目眩、皮肤干热发红、体温升高、汗液减少、脉搏呼吸加快、抽搐、丧失意识。
Symptoms of sunstroke: Headache, muscle cramps, fatigue, dizziness, hot dry skin, flushed skin, high body temperature, lack of sweating, rapid pulse, rapid breathing, seizures, loss of consciousness.
5. 拍摄了热疲劳裂纹的形核、成长、连接过程。
The nucleation, growth and connection of fatigue cracks were photographed.
6. 在热交变应力的作用下，热疲劳是铸铁工件的主要失效形式之一。wwW.wEnTIyI.cOm
Under act of the alternating thermal stress, thermal fatigue is one of theprimary invalidity forms of cast iron workpiece.
7. 本文提出一种新的热疲劳损伤判据，用以评估金属材料的热疲劳性能。
In this paper a new criterion for thermal fatigue damage was proposed to evaluate the thermal fatigue performances of metallic materials.
8. 主要涉及的内容包含每个设备部件的应力、疲劳、热棘轮、断裂力学分析和内部构件流致振动分析以及试验验证等。
The design mainly involves the analysis of the stress, fatigue, thermal ratchet and fracture mechanics, the analysis of flow-induced vibration of the internals and the test verification.
9. 对某车型发动机排气歧管的热疲劳断裂问题进行综合失效分析，并从材料、结构方面提出改进意见。
This paper gives a comprehensive failure analysis on the thermal fatigue crack of engine exhaust manifold and makes an improvement for materials and structures.
10. 他们仍然在利用马匹，从疲劳和热酒气，结果表明，随从刚刚抵达。
Their horses still in harness, and reeking from fatigue and heat, showed that the cortege had only just arrived.
11. 由于表面热疲劳裂纹的产生，使得材料强度性能损伤大于断裂韧性损伤。
The strength loss is greaser than the fracture toughness loss, because ofthe surface cracks caused. by thermal fatigue.
12. 结果表明，显微组织、抗氧化、抗生长及热疲劳抗力等性能，均有显著的改善和提高。
The results indicated that the microstructure, mechanical properties, oxidation resistance, growth resistance and thermal fatigue resistance were improved obviously.
13. 热疲劳断口具有穿晶解理特征。
The thermal fatigue fracture belongs to cleavage fracture.
14. 本文对空调器印刷电路板(PCB)通孔插装形式无铅焊点的热疲劳寿命进行了研究。
Thermal fatigue life of lead-free solder joint of Air-conditioner PCB (Printed Circuit Board) under the form of THT (Through Hole Technology) is studied.
15. 用非平衡统计的概念和方法建立微观机理与宏观性能相结合的热疲劳理论。
A non equilibrium statistical theory of thermal fatigue which connects microscopic mechanism with macroscopic properties is established.
16. 结果表明，激光表面钴合金化可获得含钴均匀的合金化层，高温硬度和热疲劳性能均有提高。
The results show that the high temperature hardness and the heat fatigue performance of alloying layer are improved.
17. 分析了压铸过程中模具的热疲劳失效机理及其影响因素，讨论了优化压铸过程控制对模具寿命的影响。
Heat fatigue failure mechanism of the die casting dies during the process of die casting were analyzed, and the influence of optimizing process control on die life of die casting were discussed.
18. 无论是淬火或淬回火态的试样其热疲劳裂纹主要沿着碳化物与基体脱开处及晶界裂纹桥接而扩展。
The thermal fatigue crack propagated mainly through the break-age of the interface of carbide and grain boundaries for either quenched or quenched and tempered steel.
19. 热冲击疲劳裂纹的形成与微孔洞的形核、长大和连通有关。
The crack formation of thermal shock fatigue is related to the nucleation, growth and join of microvoid.
20. 研究了YG10硬质合金热冲击疲劳裂纹的形成机制。
The formation mechanism of thermal shock fatigue crack of cemented carbide YG10 was investigated.
21. 活塞的热疲劳性能对柴油发动机的全寿命至关重要。
Thermal fatigue behavior of the piston is vital to the overall life-span of diesel engines.
22. 热疲劳寿命是评价柴油机可靠性的一个主要指标。
Low cyclic thermal fatigue life is an important parameter for evaluating the reliability of diesel engine.
23. 导辊是高速线材轧机上的主要消耗工具，要求高耐磨性、抗粘钢性和热疲劳抗力。
In high speed wire-rod mill, guide roller is the main consumption tool, excellent wear resistance, adhering steel resistance and hot fatigue resistance are required.
24. 研究了金属陶瓷热冲击疲劳特性，重点探讨了裂纹的形成机制。
The thermal shock fatigue character of cermets has been studied and the formative mechanism of crack discussed in detail.
25. 活塞的热疲劳试验有温度控制和时间控制两种工作模式。
In the piston thermal fatigue test, there are two different operational mode: temperature control mode and time control mode.
26. 本文对不同变形量白口铸铁的热疲劳行为进行了探讨。
The thermal fatigue behavior of white cast iron with different quantity of deformation has been investigated in the paper.
27. 发电站蒸汽管道的支管连接部位以及与之相连接的支管接管座处出现的热疲劳裂纹，严重影响了发电机组的安全运行。
The steam pipe and correlative branch pipe of power plant are detected to appear thermal diffuse crack, which influence the normal run of the generator severely.
28. 但是，陶瓷材料的致密化对其力学、抗热震和热疲劳性能有至关重要的影响。
But the densification of ceramic materials is vitally important to mechanical, thermal shock and fatigue properties.
29. 结果表明，复合涂层的热疲劳行为与热循环上限温度、涂层厚度有关。
Results show that thermal fatigue behavior is associated with circle temperature and coating thickness.
30. 结果表明，复合涂层的热疲劳行为与热循环上限温度、涂层厚度有关。
Results show that thermal fatigue behavior is associated with circle temperature and coating thickness.
版权声明：问题易所有作品（图文、音视频）均来源网络，版权归原创作者所有，与本站立场无关，如不慎侵犯了你的权益，请联系我们告知，我们将做删除处理！