故障检验用英语怎么说，故障检验的英文翻译

词语导航

基本信息

词语：故障检验

繁体：故障檢驗

拼音：gù zhàng jiǎn yàn

英语翻译

【计】 testing for bug

分词翻译

故障的英语翻译：

breakdown; fault; hitch; malfunction; stoppage; trouble
【计】 booboo; F; failure; fault; malfunction
【化】 malfunction
【经】 breakdown; trouble

检验的英语翻译：

check up; examine; inspect; proof; prove
【计】 CH; checkout; V; verify; verify check; verifying
【化】 checking; examine
【医】 analysis; coroner"s inquest; docimasia
【经】 inspection; monitoring; proof; test; verification; verify

翻译例句

1. 研究一种考虑单一故障检验的输电网络规划模型。

This paper presents a model for transmission network planning which considers single contigency tests.

2. 错误8602辅助设备故障检验鼠标和键盘均已安全连接到正确的连接器。

Error 8602 Auxilliary device failure verify that mouse and keyboard are securely attached to correct connectors.

3. 帆船保险公司通常会要求船只检验和对严重故障的修复。

Boat insurers usually require a survey and fixing any serious problems in a survey.

4. 帆船保险公司通常会要求船只检验和对严重故障的修复。如果你跳过检验的步骤，你可能就无法给船上保险了。

Boat insurers usually require a survey and fixing any serious problems in a survey. If you skip the survey, you may be unable to buy insurance until you do.

5. 牢记：如果你放弃检验的话，除非你经过许多培训，否则你极可能会漏掉故障，而且很可能是极其昂贵的故障。

Remember: unless you"ve had lots of training, you"ll likely miss problems, possibly very expensive ones, if you forego a survey.

6. 开始对环境进行功能性检验，比如VIOS故障转移以及应用程序启动和测试。

Start functional verification of the environment, such as VIOS failover and application startup and test.

7. 您在重新开始检验前，是否按程序审核数据、检查仪器或系统适用性是否有故障、是否用错了试剂、计算或数据录入是否有误？

Before you start a retest, do you have a procedure for review of the data, checking of instrument or system suitability malfunction, faulty reagents, and calculation and transcription errors?

8. 检验plc系统设计的优劣，主要考察其是否满足：正常条件下可靠运行，故障条件下可靠保护。

Discriminating good from bad of PLC system design mainly depend on whether or not reliably tuning in normal condition and reliably protecting in trouble condition.

9. 着重介绍了安全钳在电梯中所起的作用，安全钳的结构、种类及安全钳的工作原理以及安全钳的一般检验方法，安全钳常见的故障、处理方法。

It focuses on the role of safety gear of elevator, intro-duces safety gear types and working principle of safety gear, as well as the general test methods, common safety gear failure, treatment.

10. 对损伤、故障、检验和修理工艺流程图等问题进行了分析讨论。

Some issues at items such as damage, failure, inspection and repairing technology flow diagram are discussed.

11. 针对基于卡尔曼滤波器的残差检验法会跟踪软故障的局限性，提出了一种基于状态递推器的改进方法。

For the disadvantage of tracking the soft failure of the residual test based on Kalman filter, this paper makes an improvement on the method by using the state propagator.

12. 通过对液氯钢瓶瓶阀故障类型、原因的分析，提出了在钢瓶使用、充装、检验过程中适当的操作方法和对策。

By analysis of valve fault type and causes of liquid chlorine cylinder, this paper offers proper operation methods and counter-measures in use, filling and inspection processes.

13. 然后在线路首端注入电流，通过探测器检验几个分支上是否有电流流过，检测到电流的即为故障点所在的分支。

After injecting current into the head of line, the detector can check whether these branches flow current, the fault branch is that the current has flowed.

14. 当卫星速率积分陀螺的配置冗余度不满足一致性检验条件时，不能单纯利用硬件冗余实现陀螺的故障定位。

When the redundancy of the gyroscopes can not meet the condition of consistency check, fault isolation of the gyroscopes can not be realized only by hardware redundancy.

15. 还可检验微机系统的检错容错能力与故障处理功能，为微机水轮机调速器的现场调试打下良好的基础。

We can also test the capability that examines and tolerates faults of the system. So we can further test on site of the microcomputer turbine governor.

16. 在线监测与故障诊断的目的主要是检验该锅炉水循环的可靠性。

The online monitoring and fault diagnose mainly aim at the verification of the boiler water circulation reliability.

17. 检验设备，故障分析。

Inspects equipment, diagnoses trouble.

18. 本文介绍了船用柴油机故障诊断中的基本问题，讨论了诊断检验中的问题，提出了这方面的要求。

The basic problems of Marine diesel engine diagnostics are presented in the article. Problems concerning the methodology of diagnostic examination are discussed, and needs in this range are indicated.

19. 本文在第三章通过对测距系统的仿真建模分析，检验了各种情况下该方法的故障测距精度。

The simulation shows that the accuracy of fault location is greatly improved by the new methods presented in this paper, so this method is very effective in fault location.

20. 在不同的故障下对辨识参数和等值前后的系统动态响应进行分析比较，检验等值效果。

Under different kinds of fault, the parameters and dynamic responses are compared to check up the validity of the model and the parameter estimation.

21. 通过对新测取的噪声信号样本进行检验，证明该方法能有效地判断待检样本的类型，诊断连杆轴承故障。

Case research proved it"s effective to recognize new data of fault model and diagnose the faults of connecting rod bearing .

22. 本文介绍了仪表回路试验的方法以及常见故障的处理措施，经实践检验，该方法和措施对仪表回路的试验工作具有参考价值。

This paper has introduced common testing methods as well as fault handling measures by practice, these methods and measures have reference value for the testing work of meter loop.

23. 分析了基于卡尔曼滤波器的残差检验法对传感器缓变故障检测的不敏感性原因。

The reason that the residual test method based on Kalman filter is insensitive to sensor soft fault detection is analyzed.

24. 诊断覆盖率不包含由检验测试检测到的任何故障。

Diagnostic coverage does not include any faults detected by proof tests.

25. 研究利用卡尔曼滤波器及多重故障假设检验方法来检测某发动机控制系统传感器硬、软故障，并实现故障传感器的输出重构。

According to Kalman filter and multiple-failure-hypothesis based testing, the sensor failures are detected, isolated and accommodated in turbofan engine control system.

26. 论文的最后在实验基础上，整理出故障训练及检验样本，编制了基于人工神经网络的故障诊断程序。

At last a FDD tool is programmed based on ANN with experiment results which formed training stylebook and test stylebook.

27. 第二，对二元概率假设检验理论进行研究，并通过其来完成作动器故障的残差判决。

Secondly, Binary probability hypothesis detection is studied and is utilized as actuators" FDI residual decision.

28. 这一工具可以用来检查多重复杂故障对于大型电力系统的非线性影响，还可用来检验严重故障下系统静态潮流解的存在性。

This proposed tool is designed to investigate the nonlinear effects of enforcing a multiple compound contingency in a large-scale power system.

29. 这一工具可以用来检查多重复杂故障对于大型电力系统的非线性影响，还可用来检验严重故障下系统静态潮流解的存在性。WwW.WeNtiyi.COm

This proposed tool is designed to investigate the nonlinear effects of enforcing a multiple compound contingency in a large-scale power system.