角坐标用英语怎么说,角坐标的英文翻译


词语导航

基本信息

词语:角坐标

繁体:角坐標

拼音:jiǎo zuò biāo

英语翻译

【计】 angular data

相关词条

1.angularposition  2.angularcoordinate  3.angulardata  

分词翻译

角的英语翻译:

corner; angle; cape; contend; horn; wrestle; role
【医】 angle; anguli; angulus; Broca"s angle; cornu; cornua; gonio-; horn

坐标的英语翻译:

coordinate
【电】 coordinates; frame of reference

翻译例句

1. 他们用一种三角形的坐标纸把三个测量值画在一起。

They used a kind of triangular graph paper to plot the three measurements against one another.

2. 由于您定义了与纹理的角相关的纹理坐标,所以任意大小的图像都有相同的坐标。

Because you define texture coordinates relative to a texture"s corners, images of any size have the same coordinates.

3. 物质有三态,空间有三维,而三角测量是我们寻找自己坐标的方式。

There are three states of matter, three dimensions. Triangulation is how we get our bearings.

4. 为了便于对图像进行修改和注释,将输出三角形坐标以便稍后应用到图像中。

To facilitate modification and annotation of the image, the triangle coordinates are printed out to be applied to the image later.

5. 当汽车在开行当中时,跟踪设备用三个或四个GPS卫星以三角形定位,然后持续地通过无线电数字传输目标所在的坐标位置。

As the target drives around, the tracking device triangulates its position from three or four GPS satellites, and digitally transmits its coordinates continuously by radio.

6. 例如,一个三角形的形状被切断穿过一层和二层之间的网格,并放置在一个平面和坐标平面之外。

For example, one triangle shape was cut out crossing the grid between the first floor and the second, and placed beyond the X and Y coordinate plane.

7. 本文介绍一个三角网坐标平差的BASIC程序。

This paper introduces a BASIC program for coordinate adjustment of tri an gulation net.

8. 电脑辅助编程电脑辅助编程部分包含的特殊象征意义的编程语言,确定坐标点,和零件的角,边,面。

Computer-aided programming Computer-aided part programming involves special symbolic programming languages that determine the coordinate points of corners, edges, and surfaces of the part.

9. 推导出用三顶点的测地坐标计算地球椭球面上三角形面积的公式。

The formula for area of triangle on ellipsoid by means of geodesic coordinate is derived in this paper.wWW.weNTIyI.Com

10. 改进的方法是将激光三角测量头装在三坐标机上以代替触针,从而实现了非接触测量,但此法仍然受到三坐标机本身的限制。

Now a laser triangle measuring device instead of test probe is installed on the three-coordinate measuring machine, but this method is still limited by the three-coordinate measuring machine itself.

11. 利用三角形的重心坐标,证明涉及三角形平面上一动点的一些不等式。

Prove some inequalities involving a moving-point on the plane of triangle with it′s distance coordinates.

12. 首先介绍了六角网格坐标系及圆形窗口与待裁剪线段的关系。

Hexagonal grid coordinate and the relation of the circle window and the line to be clipped are demonstrated.

13. 根据道路设计信息,推导出线路坐标系下任意中桩点的坐标计算公式和横断面方位角,由计算得到的横断面方向指导野外GPS断面测量。

Based on road design information, we derived coordinates of arbitrary points in the pile and cross-sectional azimuth which may guide global positioning system (GPS) surveying in section surveys.

14. 本文用两种不同的数学方法解决国家体育场斜(扭)柱在任意高程上柱角点三维坐标计算问题,对斜柱现场放样的方法进行阐述。

The different mathematical methods were used to calculate the three dimensional coordinate of the national stadiums raking columns, and the setting out method of the raking columns was elaborated.

15. 在球坐标系中,建立了球形滚刀的各个螺旋面方程,推导了侧后角公式,并给出了计算实例。

The helical surface equations of the spherical hob are set up in spherical coordinates. The formulas of the side clearance angle and numerical examples are given.

16. 将雷达转换为姿态角不断变化的目标体坐标系下一点,研究雷达视线在目标体坐标系下的方位和高低角。

Considering radar as a point in variational target body coordinate, we can study the azimuth and elevation of line of sight of radar in target body coordinate.

17. 通过教学实践总结提炼出一种简便、实用的坐标方位角计算公式。

A sort of simple and convenient, practical computation formula of coordinate azimuth is abstracted and summarized by teaching practice.

18. 连结这些点成三角形,求算这些点的趋势坐标及降尘值,最后计算大气降尘量。

Connecting every spot to form a triangle, and calculated trend coordinate and deposition value of the spots, finally calculated atmospheric dust deposition.

19. 通过对极坐标法误差的计算论证了放样点误差主要是由测角误差引起。

Through polar coordinate method error calculus demonstrated that the setting-out point error is mainly caused by Angle measurement error.

20. 针对一种新型永磁球形步进电机,运用卡尔丹角旋转建立了转子固连坐标系下转子动力学模型。

The dynamic model for a novel permanent magnet spherical stepper motor based on Cardan Angle rotation in rotor-fixed coordinates frame was set up.

21. 由于工作台摆动角度受机床结构的限制,小摆角五坐标数控机床不能直接进行离心叶轮的连续加工。

Five-axis NC machine tool with small pendulum Angle table can not carry out continuous cutting of the part of centrifugal turbine because of the structure of machine tool.

22. 教轴承,分成三角形,情节坐标格子,补偿偏斜并且读地志的地图。

Teaches bearings, triangulate, plot co - ordinate grids, compensate for declination and read topographic maps.

23. 给出了非圆齿轮的节曲线极坐标方程,两齿轮中心距的计算方法,节曲线长度、基础圆半径和压力角的计算公式。

The polar equation of non-circular gear pitch curve, calculation method of center distance, formula of pitch curve length, primary circle radius and pressure Angle is given.

24. 应用三角剖分、引入面积坐标来求出方程的近似解。

The triangular elements and area coordinates are used to solve the numeric solution.

25. 应用三角剖分、引入面积坐标来求出方程的近似解。

The triangular elements and area coordinates are used to solve the numeric solution.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!