
词语导航
基本信息
词语:熔接
繁体:熔接
拼音:róng jiē
英语翻译
【化】 heat sealing
相关词条
1.fusing 2.fusionsplicing 3.fusion 4.buttfusion分词翻译
熔的英语翻译:
fuse; melt; smelt接的英语翻译:
receive; accept【电】 connecting
翻译例句
1. 压出的跑步皮带熔接牢固,美观。
Pressure welding belt running out of a solid and beautiful.
2. 蜡烛的底部与烛台熔接在一起了。
The bottom of the candle is fused with its holder.
3. 在这样的高温下熔接钢铁需要快速。wwW.wENTiyi.COm
It takes speed to weld steel at this heat.
4. 这些合金可在不同的温度[热度]熔接。
These alloys weld at different heats.
5. 作为规定,容器应用熔接弧焊工艺进行焊接。
As a rule, vessels shall be welded by fusion arc process.
6. 提出了一个分析浇口位置对熔接痕影响的方法。
This paper presents a method to explore the implications of gate location on weld lines.
7. 在一定程度上接头上熔接不好的缺陷也观测到了。
To a lesser extent, lack of fusion at the bottom of the joint was observed also.
8. 然后用塑料熔接i胶合板的章节一起加入了舱壁。
Then using the plastic weld I glued the sections together and added the bulkheads.
9. 介绍光纤熔接缺陷的识别在光纤通信中的重要意义。
The important meaning of the optical fiber fusion defect recognition is introduced.
10. 熔接参数(考数值为电承插热熔,热熔时间和冷却时间。
Welding parameter. ( Reference values for electric socket welding-welding time and cooling time.
11. 我们拥有印刷、烫金、超声熔接、组装等二次加工工程。
We have secondary processes like printing, hot stamping, ultrasound welding, assembling etc.
12. 转压点太高:产品充模不足,熔接痕,凹陷,尺寸偏小等。
Too high switch point: empty part, weld line, sink mark, and small.
13. 对于某些特殊应用,激光熔接甚至可以代替传统的缝纫工艺。
For certain applications, the laser welding can even offers a replacement for the sewing process.
14. 采用了稳定耐用的热熔接方式来熔合封口,使封口更加密合。
With a stable and durable way to fusion weld heat sealed together to make sealing more encryption.
15. 开始真正操作进行熔接加工时,要留心深入的观察两个指示器。
Start the welding process and visually control it by observing the melt penetrating out of the two indicators.
16. 结果表明,采用阀式浇注技术对控制熔接痕取得了较好的效果。
The results show that the weld marks are well controlled by this method.
17. 预测可能存在的熔接痕位置及锁模力的大小,确定最佳浇口位置。
In order to obtain the best gate location addition, the position of weld lines and the clamp force were forecasted.
18. 一旦做到这一点,我可以配合适当的三段一起和胶水他们与塑料熔接。
Once that is done I can fit properly the three sections together and glue them with the plastic weld.
19. 电子器件质量评定协调体系。熔接可编程只读存储器。空白详细规范。
Harmonized system of quality assessment for electronic components. Fusible link programmable read only memories. Blank detail specification.
20. 以江苏南通接入网为例,重点介绍了带状光缆熔接的操作程序及控制要点。
This paper takes an example of Nantong access network, introducing the operation processes and main control points for splicing fiber ribbon cable.
21. 针对造成光纤熔接损耗的各种本征和非本征因素,进行了详细的分析和总结。
The intrinsic and extrinsic causes of splice loss for optical fiber are analyzed and summarized in detail.
22. 聚乙烯管连接中大量使用电熔接头,其质量的好坏直接影响管道系统的安全。
Electro-fusion is widely used in joint of polyethylene pipe, of which quality is very important to piping system.
23. 那么这条缝可以在车间焊接。在处理和安装熔接接头的成品管段时应特别小心。
But care shall be taken on fusion welded joints of fabricated spools during handling and installation.
24. 研究发现,熔接痕的结构与材料配方、挤出机机头模具及加工工艺参数均有关系。
The research showed that the structure of weld mark was connected with the material formulation, die mould of extrusion machine and parameters of processing technology.
25. 分析了熔接痕CAE的特点及误差,并针对不同影响因素,给出了相应控制对策。
The peculiarity and error of CAE were analysed, and corresponding control measures for the weld line were proposed according to different affecting factors.
26. 特氟龙材料的活塞环与活塞熔接成一体不仅减磨效果好,同时能减少噪音防止内泄。
Teflon Piston-ring integrated with piston, not only reduce the friction and noise, but also avoid inner-leakage.
27. 预测可能存在的气泡、熔接痕的位置,确定最佳浇口位置,并在此基础上设计模具。
In order to obtain the best gate location addition, the position of air bubbles and weld lines were forecasted.
28. 由于熔接型侧面耦合器无须折射率匹配介质,因此能够承受很高的抽运光功率密度。
This kind of fused side-coupler can endure high-power light for it is without index-matching materials.
29. 在光纤接续领域,机械式光纤接续和熔接接续是实现光纤固定连接的两种不同方式。
In the field of optical fiber connection, the mechanical fiber connection and thermo-weld are two different ways of realizing the fixed connection of optical fiber.
30. 结果表明,熔接区的各项性能均达到和超过相关的钴合金及镍铬高温合金的各自性能。
The results indicate that every performance of melting range reaches or surpasses respective performance of related cobalt alloy and Ni Cr alloy.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
