热固化用英语怎么说,热固化的英文翻译


词语导航

基本信息

词语:热固化

繁体:熱固化

拼音:rè gù huà

英语翻译

【化】 thermocuring; thermosetting

相关词条

1.thermofixation  2.heatcure  3.heatcuring  4.thermosetting  

分词翻译

热的英语翻译:

ardent; caloric; craze; eager; fever; heat; hot; warm
【化】 heat
【医】 calor; cauma; febris; fever; fievre; heat; hyperthermia; hyperthermy
phlegmasia; phlegmonosis; pyreto-; pyro-; therm-; thermo-

固化的英语翻译:www.WentiYi.COM

solidify
【计】 hardening
【化】 cure; curing
【医】 solidification; solidify

翻译例句

1. 目的研究微波原位热固化治疗肝脏肿瘤的疗效。

Objective To study the results of in situ microwave thermocoagulation therapy for liver neoplasms.

2. 可热固化粘合剂组合物,制品,半导体器械和方法。

Heat curable adhesive composition, article, semiconductor apparatus and method.

3. 在约束层和热固化加强层之间有丁基胶的粘弹性材料层。

The adhesive elastic material layer arranged between the restricting layer and the thermo-cured reinforcing layer is made of butyl rubber.

4. 方法:对靶组织热固化体元与超声幅照计量的关系进行了数字模拟研究。

Methods: Numerical simulations of the thermal necrosis extent in a target tissue and its dependence on the HIFU exposure dosage have been adopted.

5. 本文讨论纳米精确度光学对准技术,以用于采用热固化树脂的微光学包装。

This paper discusses a nanometer level precision alignment technique as applied to highly efficient micro optics packaging using heat curable adhesives.

6. 综述了近年来国内外关于环氧树脂的热固化、微波固化及光固化技术的研究情况。

The recent research development of thermosetting, microwave and photo curing technology of epoxy resin was presented in this paper.

7. 这些涂料可以通过化学方法固化、热固化或通过暴露到UV或电子束辐射下固化。

These coatings may be cured via chemical means, thermally, or by exposure to UV or electron beam radiation.

8. 目的:考察热固化时间及温度对喷雾干燥牛血清白蛋白微球表面活性氨基含量的影响。

OBJECTIVE: Effects of heat denaturation time duration and temperature on the surface reactive amino group content of spray dried bovine serum albumin microspheres were investigated.

9. 与普通的热固化方法相比,树脂基复合材料的电子束固化是一种成本有效的固化方法。

Electron beam curing of resin matrix composites is a cost effective method compared with conventional heat curing.

10. 与K - 35固化剂组合,形成热固化胶粘剂,即使120度也能保持很高的机械强度。

With hardener K-35 forms heat curing epoxy adhesive characterized by outstanding mechanical strength even at 120 deg c.

11. 研究影响热固化过程的因素(分子量、炔基含量、羟甲基含量)和典型树脂的固化动力学。

The effects of molecular weights, ethynyl contents and methylol contents on thermal cure and cure kinetics of typical propargyl resins are also reviewed.

12. 该组合物可用作可辐射固化的涂层、用作粘合剂、可光确定的涂层或者用作热固化涂层。

The composition is useful as a radiation curable coating, as an adhesive, a photodefinable coating, or as a thermal cure coating.

13. 主要反映在对涂层材料、涂层结构、表面处理工艺、热固化工艺等设计的理解深度和重视程度上。

Those mainly reside in understanding depth of and attention level to the coating material, coating structure design, surface cleaning process and heating drying process.

14. 研究了PAE用量、热固化时间和温度对麻浆、桑皮浆和针叶木化学浆手抄薄型纸湿强度特性的影响。

The wet-strength properties of three thin handsheets made of hemp pulp, softwood pulp and mulberry pulp with the wet-strength resin (PAE) as the additive were studied.

15. 此外,嵌段共聚物和IPN光固化体系形成的相畴结构均一,其抗张强度和伸长率明显高于热固化体系。

In addition, photo-set block copolymer and IPN system, with regular microphase domain structure, have higher tensile strength and elongation at break than those of heat-set polymers.

16. 以环氧树脂为基体,间苯二胺和氨基二苯甲烷的低融点混合物为固化剂,铜粉为导电填料,制备了热固化各向同性导电胶。

Copper conductive adhesives were prepared using epoxy as matrix, the mixture ofm-phenylenediamine and diaminodiphenylmethane as hardener, and copper particles as the con-ducting filler.

17. 以环氧树脂为基体,间苯二胺和二氨基二苯甲烷的低融点混合物为固化剂,铜粉为导电填料,制备了热固化各向同性导电胶。

Copper conductive adhesives were prepared using epoxy as matrix, the mixture ofm-phenylenediamine and diaminodiphenylmethane as hardener, and copper particles as the conducting filler.

18. 本文以差热扫描量热法(DSC)分别研究了脲醛(UF)胶、聚异氰酸酯(PMDI)胶以及它们的混合液的加热固化过程。

The curing processes of urea-formaldehyde(UF) resin, polydiphenylmethane diisocyanate (PMDI) and their mixtures were examined respectively by differential scanning calorimetry (DSC).

19. 但环氧树脂传统的热固化方法由于存在着传热速度慢、温度梯度大、固化不均匀和固化速率低等问题,严重影响了环氧树脂基复合材料的固化质量。

The effect of microwave curing on the curing velocity, mechanical and thermal properties of epoxy and epoxy matrix composites were discussed emphatically and in detail.

20. 降低放射性废树脂水泥固化中水化热可以降低温度应力、减少裂纹。

Reduction of the hydration heat during cementation of radioactive resins can reduce thermal stresses and prevent thermal cracks.

21. 含有加捻纤维束的复合材料由于固化而产生的热残余应力问题,可以用能量法获得解答。

The problem of residual thermal stresses in the composites containing twisted fiber bundles due to curing can be solved in energy method.

22. 一种方法为浸渍木材所宣称的那样,在索赔10,其中,固化是由应用热或轻。

A method for impregnating wood as claimed in claim 10, wherein said curing is by the application of heat or light.

23. 它具有机械强度高、韧性好、耐热性好及高的热强度、低收缩性、固化性好等特点。

It has high mechanical strength, toughness, good heat resistance and high thermal intensity, low shrinkage, good curing characteristics.

24. 酒精固化装置、热吹风固化装置、简易切刀等。

Alcohol curing equipment, hot air curing device, Easy cutter etc.

25. 该树脂所生产制品具有很高的阻燃性能和机械强度,热变形温度高,固化速度快,浸透性好。

The resin produced by the flame-retardant products with high strength and mechanical properties, thermal deformation temperature, curing speed, and good soak.

26. 具有较高的热变形温度、断裂延伸率和冲击韧性,有效防止了制品在生产和使用中的开裂,同时具有固化快的特点。

A higher distortion temperature, elongation and fracture toughness, effectively preventing the production and use of products in the cracking, a fast curing the characteristics.

27. 大体积混凝土在固化过程释放的水化热会产生较大的温度变化和收缩作用。

Releasing steam heat from the mass concrete structures while solidifying leads to produce the temperature change and contraction.

28. 其基础树脂固化后的硬度和热变形温度较高,同时又具有良好韧性和耐气候性。

Based on the resin curing the hardness and thermal deformation temperature higher, but also has a good climate of tolerance and toughness.

29. 其基础树脂固化后的硬度和热变形温度较高,同时又具有良好韧性和耐气候性。

Based on the resin curing the hardness and thermal deformation temperature higher, but also has a good climate of tolerance and toughness.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!