
词语导航
基本信息
词语:热浸
繁体:熱浸
拼音:rè jìn
英语翻译
【化】 hot dipping
相关词条
1.hot-dip分词翻译
热的英语翻译:
ardent; caloric; craze; eager; fever; heat; hot; warm【化】 heat
【医】 calor; cauma; febris; fever; fievre; heat; hyperthermia; hyperthermy
phlegmasia; phlegmonosis; pyreto-; pyro-; therm-; thermo-
浸的英语翻译:
dip; immerse; soak; steep; swim【医】 dip; immerse; immersion; infusion
翻译例句
1. 热浸镀锌层引起疲劳强度的显著降低。
A layer of hot-dipped galvanizing causes a considerable reduction in the fatigue strength.
2. 适用于波峰焊、热浸焊和高档引线搪锡。
Apply to wave soldering, welding and hot dip high-grade iron tin wire.
3. 研究了水溶剂法钢铁表面热浸镀铝工艺;
The technology of hot dip aluminized coatings on ferrous products by water flux methods in studied.
4. 采用热榨法和热浸提法对苦荬菜汁进行提取试验。
Heating-crushing and heating extraction were applied to extracting juice from Lactuca Indica l.
5. 本文介绍现代热浸镀锌线的特点是高产量和高质量。
The Feature of modern hot dip galvanizing line are high output and high product quality.
6. 适用于高档电路板的波峰焊、热浸焊和高档引线搪锡。
Apply to the high-grade circuit boards wave soldering, welding and hot dip high-grade iron tin wire.
7. 完全采用灌浆的岩石锚杆,其最小要求应为热浸镀锌涂层。
Resin end anchored bolts shall be hot-dip zinc and epoxy coated.
8. 适用于电路板喷锡,热风整平,波峰焊、热浸焊和引线搪锡。
Tin spray applied to circuit boards, hot air leveling and wave soldering, welding and hot dip tin lead anyone.
9. 本文研究用酶法和热浸提法从啤酒废酵母中提取甘露糖蛋白。
The mannoprotein was extracted from waste brewer"s yeast by heat-extracted and enzymatic digestion.
10. 锌及锌基合金主要用于热浸镀锌,提高钢制件的耐腐蚀性能。
Zinc and Zinc-based alloys are used mainly in hot-dipping galvanizing to improving the corrosion-resistance of steel.
11. 综述了蒸发式冷凝器盘管热浸镀锌机理及热浸镀锌的研究现状。
The research status of hot dipping galvanizing for evaporative condenser coil and its mechanism were reviewed.
12. 主要介绍了热浸镀模拟试验机的系统设计、控制策略和重要回路。
This paper presents the system design, control tactic and main circuit of control system for hot-dip galvanizing simulator.
13. 本文对球墨铸铁的热浸渗铝工艺和渗铝球铁的耐热性能进行了研究。
In this paper the hot dipping aluminium technology of ductile cast iron and heat resistance of hot-dipped aluminium ductile cast iron are studied.
14. 对热浸铝的历史进行了简要回顾,分析了其镀层组织结构及形成机理。
The paper mainly focus on the development of hot dip aluminized coating, and analyzes the composing mechanism of plating process and its microstructure.
15. 探讨了热浸扩散渗铝复合渗硼中的硼化物的形成机理及硼的迁移机制。
The mechanism of both forming boride and transferring of boron in the aluminized and then boromized layer were discussed.
16. 分析了目前的热浸渗铝工艺存在的问题,并提出了今后研究工作的重点。
The main problems existed in the hot-dipped aluminum technique are analyzed, and the future research work is proposed.
17. 热浸镀技术是防止钢铁材料在自然环境中受腐蚀的最经济有效的防护技术。
Hot dipping is the most economic and efficient technology to protect iron material from corrosion in nature circumstance.
18. 保时捷成为第一家在所有标准车型上采用双面热浸镀锌钢板的汽车制造商。
Porsche becomes the first car manufacturer to use hot-galvanized sheet metal on both sides of all standard models.
19. 研究了热浸渗铝钢扩散层空洞对循环氧化和剥落性能的影响规律及其机理。
The effects of the voids in the diffusion layer on cyclic oxidation and spalling resistance of aluminized steel was investigated.
20. 结果表明,表面热浸镀铝进行表面合金化的材料具有很好的抗冲刷腐蚀能力。
The results show that surface alloying materials with thermal coated aluminium has excellent resistance to erosion corrosion.
21. 为了研究压铸模与铝合金金属间化合物的形成与分解过程,进行了热浸铝试验。
The hot dip aluminum has been carried out to research the formation and dissolution of the intermetallic layer between die casting die and aluminum alloy.
22. 结果表明,钢丝热浸镀时走速过快和镀层不均匀是导致扭转脆性断裂的主要原因。
And quick wire movement during hot-dipping and inhomogeneous coating was identified as the main cause.
23. 应用SEM电镜分析和能谱分析等方法分析了热浸扩散渗铝层的成分、组织和形貌。
Using SEM with EDX analysis, the composition, microstructure and morphologies of the surface layer were analyzed.
24. 有效防止合金层沉积的镀锌槽元件,生产上述元件的方法,和使用该元件的热浸渡方法。
Galvanizing bath members effectively protected against the deposition of alloy layers, a process for producing said members, and a method of hot-dip galvanizing that use said members.
25. 指出了蒸发式冷凝器盘管热浸镀锌中存在的一些问题。并对该领域的深入研究提出了建议。
Some problems existing in hot-dip galvanizing for evaporative condenser coil were presented and Suggestions on further research in the field were put forward.
26. 热浸镀铝-镧钢的扩散层中存在非晶态相,且稀土镧的添加可使扩散层中的非晶含量增加。
There is amorphous phase in diffusion layer of the hot-dip La-aluminizing and the content of the amorphous phase increases due to the addition of rare earths la.
27. 热浸镀铝-镧钢的扩散层中存在非晶态相,且稀土镧的添加可使扩散层中的非晶含量增加。wWW.wEntIYI.COm
There is amorphous phase in diffusion layer of the hot-dip La-aluminizing and the content of the amorphous phase increases due to the addition of rare earths la.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
