
词语导航
基本信息
词语:凸轮轴
繁体:凸輪軸
拼音:tū lún zhóu
英语翻译
camshaft【化】 cam shaft
分词翻译
凸的英语翻译:
protruding【医】 convexity; cyrto-; prominence; prominentia
轮轴的英语翻译:
axle; axletree【电】 hub
翻译例句
1. 其他可能的原因包括油泵问题、杆和主轴承的空隙、凸轮轴停止工作、或者凸轮的方位和升降。
Other possible reasons include problems with the oil pump, rod and main bearing clearances, camshaft stopping playing, or cam bearings and lifters.
2. 凸轮轴是汽车发动机的重要零件。
Camshaft is one of the important parts on the automobile engine.
3. 凸轮轴。天!我对你恨不起来。WWW.WEnTiyI.coM
Mikaela: Cam shafts. God, I hate you.
4. 在他的初始阶段凸轮轴的转换被执行。
In its initial stage the change-of the camshaft is performed.
5. 凸轮轴上有一个凸轮,凸轮上有一个凸角。
The camshaft has a cam, on which there is a lob, or bump.
6. 对球铁凸轮轴的等温淬火工艺进行了分析。
The isothermal quenching process of the ductile iron camshaft was analyzed.
7. 凸轮轴由曲轴通过齿形带或齿轮或链条驱动。
Camshaft from the crankshaft through the timing belt or gear or chain drive.
8. 当您增加转速时,但这种配置的凸轮轴不工作。
When you increase the RPM, however, this configuration for the camshaft does not work well.
9. 而其连接方法是装配式凸轮轴制造的关键技术。
It"s connecting methods are the key technology in assembling camshaft production.
10. 因此,凸轮轴必须以曲轴正好一半的速度旋转。
Therefore, the camshaft must revolve at exactly half the speed of the crankshaft.
11. 安装凸轮轴室盖。
Install cover for camshaft housing.
12. 与阀盖倾斜了,您可以看到单一的架空凸轮轴和阀门。
With the valve cover tilted up you can see the single overhead CAM shaft and valves.
13. 介绍了凸轮轴检测仪的原理、硬件电路及软件的设计。
This article introduces the principle, hardware circuit and software design of cam shaft detector.
14. 气缸头的前部还装有油画廊供应量凸轮轴可变配气相位。
The front of the cylinder head is also equipped with oil galleries to supply the intake camshaft VVT.
15. 中空装配式凸轮轴的技术关键为凸轮和轴体之间的连接。
The key technology of hollow assembled camshaft is joint between the shaft and the cam lobes.
16. 偏心轮可能与凸轮轴是一体的,也可能是通过螺钉连接的。
The eccentric may be part of the camshaft itself or may bolt to it.
17. 拆去凸轮轴固定螺栓,并拆去作为一个总成的链轮和链条。
Remove the camshaft retaining bolt and remove the sprockets and chain as an assembly.
18. 本文详细叙述了高精度凸轮轴测量系统中的数据处理算法。
In this paper, the algorithm of data processing in high precision camshaft measuring system is described in detail.
19. 那金属轴叫凸轮轴,在发动机里的每个气门一般有各自的凸轮。
The metal shaft, called the camshaft, typically has individual cams for each valve in the engine.
20. 一套气门开启机构包括一个气门挺杆和一个在凸轮轴上的凸轮。
The value-opening mechanism includes a valve lifter and a cam on a camshaft .
21. 一套气门开启机构包括一个气门挺杆和一个在凸轮轴上的凸轮。
The value-opening mechanism includes a valve lifter and a CAM on a camshaft.
22. 利用所谓的霍尔效应,霍尔效应传感器可确定各凸轮轴的位置。
Using the so-called hall effect the hall sensors determine the position of the respective camshaft.
23. 那金属轴叫凸轮轴,翣在发动机里的每个气门一般有各自的凸轮。
The metal shaft, called the camshaft, typically has individual cams for each valve in the engine.
24. 在发动机中,凸轮轴上的凸轮控制进气门和排气门的开启和关闭。
In the engine, cams on the CAM shaft cause the intake and exhaust valves to open.
25. 链条驱动机构包括一条双排辊链,通过它来驱动进气和排气凸轮轴。
The chain drive consists of a duplex roller chain which drives both intake and exhaust camshafts.
26. 一个位于中央的每缸银行是由凸轮轴驱动的玻璃纤维增强型齿形带。
One centrally located camshaft per cylinder bank is driven by a fiberglass-reinforced toothed belt.
27. 在发动机里,机油被供应到旋转在其支承轴内的曲轴和凸轮轴轴颈上。
In the engine, oil is supplied to crankshaft and camshaft journals rotating in their supporting bearings.
28. 一些高性能发动机有两个单独的凸轮轴,分别负责开关进气门和排气门。
Some high-performance engines have two separate camshafts, one for each set of inlet and exhaust valves.
29. 一些高性能发动机有两个单独的凸轮轴,分别负责开关进气门和排气门。
Some high-performance engines have two separate camshafts, one for each set of inlet and exhaust valves.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
