
词语导航
基本信息
词语:加工法
繁体:加工法
拼音:jiā gōng fǎ
英语翻译
【机】 guerin process guerin
分词翻译
加工的英语翻译:
machining; process
【化】 processing
【医】 elaborate; elaboration
【经】 extra work; process; processing; transform
法的英语翻译:
dharma; divisor; follow; law; standard
【医】 method
【经】 law
翻译例句
1. 采用5坐标加工法可加工任何形状。
Any shape was machined with 5-coordinate machining method.
2. 介绍了大面积镜面电火花加工法现状。
Current situation about large surface mirror EDM is introduced.
3. 本文介绍了几种EVA改性树脂及其机械加工法。
The paper introduces several modified resins with EVA and their mechanical processing methods.
4. 《农政全书》详细记述了番薯的种植、贮藏、加工法。
"Agricultural Administration book," a detailed account of the sweet potato cultivation, storage, processing method.
5. 结果蒸制后干燥的产地加工法优于直接干燥的加工方法。
Results Steaming and oven drying were better than direct drying.
6. 提出了组合加工法的基本原理、实施步骤及应注意的事项,并举例说明。
The basic operating principle implementation procedure and points for attention of unitized tooling are presented in this paper, and examples are given for explanation.
7. 电火花加工法对加工超韧性的导电材料(如新的太空合金)特别有价值。
Electrical discharge machining has proved especially valuable in the machining of super-tough, electrically conductive materials such as the new space-age alloys.
8. 为提高整体叶轮叶片数控加工的效率和质量,提出了一种分片侧铣加工法。
To improve the efficiency and quality for numerical control of machining of integral impellers, a new method, i. e. flank milling on divided pieces, was put forward.
9. 本文提出了在普通数显车床美机床上采用绝对座标半径补偿加工法的研究结果。
This paper gives the results of the research work on machining by the method of compensation with the radius in absolute coordinate for lathe-type machine tools with digital display.
10. 针对双滚道滚动轴承套圈磨削加工过程中存在的问题,提出了动态控制磨削加工法。
Pointing at problems produced in grinding process of bearing rings with double raceways, the dynamic control grinding process method is put forward.
11. 液体磁性磨具光整加工法是利用液体磁性磨具的磁流变特性开发的表面光整加工方法。
The liquid-magnetic abrasive tool finishing technology is the surface finishing technology which utilizes the magnetic rheological property of the liquid-magnetic abrasive tool.
12. 未经过特殊加工法处理的牛仔裤应在穿之前清洗或浸泡,第一次清洗浸泡后他们将不再伸展。
Unsanforized jeans should be washed or soaked before wearing to get rid of the initial shrinkage, after the first wash or soak they will not stretch out with wear.
13. 为满足渐开线花键的配合要求,同时降低加工难度,提出了一种新的加工方法——现合加工法。
In order to meet the demand of involute spline"s match, and simultaneously reduce the difficulty of process, a new machining way--- match machining is put forward.
14. 提出了一种用电火花加工法抛光CVD金刚石膜的新工艺,并对其加工去除机理进行了初步探讨。
A new technology used for polishing CVD diamond films by EDM method is put forward and its removal mechanism is dealt with.
15. 好时公司的研究显示,荷兰式加工法(一种碱化加工法)可以降低巧克力的苦味,但同时也破坏了很多营养成分。
According to research by Hershey co., Dutch processing, a chemical alkalizing process that makes chocolate less bitter, also destroys many nutrients.
16. 具有非圆曲线外形的零件形状复杂,传统的靠模加工法柔性差,不能满足机电元件类型多样化、产品更新换代快的要求。
The parts with non circularity curve have very complex shape. The traditional machining method has bad flexibility, and it can"t respond the variety of the electromechanical components updated.
17. 综述了二元光学元件的常用制作工艺技术,包括台阶刻蚀法、薄膜沉积法、直接写入法、准分子激光加工法和灰阶掩模法。
The common fabrication technologies of binary optical elements were expatiated, including etching, thin-film deposition, direct writing, excimer laser projection and gray-scale masks.
18. 介绍了采用电解一射流加工法在油管外壁表面加工标记(号)的基本原理及其过程,通过实验总结出了较为合理的工艺规范。
The basic theory and process for machining marks (code) on the outer wall of pipe with electrolyse-jet are introduced. A reasonable process rule is thus given experimentally.
19. 针对非轴对称非球面的成形加工法柔性不足及球形砂轮加工法对工具和机械的要求太高的缺点,提出采用普通圆弧金刚石砂轮加工的平行磨削法。
In accordance with the difficult problems of grinding non-axisymmetric aspheric surfaces with 5-axis CNC machining and mould grinding, a new parallel grinding method is put forward.
20. 该饮食法强调食用未加工的、富含营养的新鲜食品。
Instead, the diet stresses unprocessed, fresh foods that are packed with nutrients.
21. 这样对某些公司也带来了一些麻烦,这些公司专业从事从混杂的垃圾废料中回收塑料制品,并且他们依赖着回收法来获取必需的加工原料。
That has caused problems for companies that specialise in recycling plastics from complex waste streams and depend on take-back laws for getting the necessary feedstock.
22. 这种加工工艺叫作加层制造法,其工作原理有些类似三维打印机。Www.Wentiyi.CoM
The process is called Additive Layer Manufacturing, and it works somewhat like a 3-D printer.
23. 方法引入了金属铣削加工参数多目标优化模型,应用目标达到法对模型求解,又基于神经网络建立了金属铣削参数自动获取模型。
It introduces the multi-objected optimization model of the metal milling process parameters and applies the goal attainment method to ask for the explanation for the model.
24. 支承孔系的加工采用的是坐标法镗孔。
The machining way of the series of supporting hole is to bore hole by coordinate.
25. 作为一个加工者,优化喂料口的唯一方法就是调整它的温度。
As a processor, the only way you can maximize feed-throat performance is to adjust its temperature.
26. 风险评价是风险管理的重要阶段,针对农产品加工企业特点,提出了一种基于模糊层次分析法的农产品加工企业风险评价方法。
Risk evaluation is one of the most stages of risk management. This paper put forward a new method for agricultural products making enterprise on the base of fuzzy-AHP.
27. 针对面齿轮硬齿面磨削加工中存在的困难,提出用蜗杆砂轮磨削的双参数法来磨削面齿轮。
Using a helical involute pinion surface to form the grinding worm surface, a helical face gear is formed via a two-parameter worm envelope.
28. 核桃仁的水剂法加工技术具有良好的推广应用前景,其中分离机是关键设备。
The technique of processing the walnut kernel by aqueous method has the good prospect of application, and the separating machine is the pivotal equipment.
29. 核桃仁的水剂法加工技术具有良好的推广应用前景,其中分离机是关键设备。
The technique of processing the walnut kernel by aqueous method has the good prospect of application, and the separating machine is the pivotal equipment.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
