
词语导航
基本信息
词语:坯炉
繁体:坯爐
拼音:pī lú
英语翻译
【机】 biscuit furnace
分词翻译
炉的英语翻译:
furnace; kiln; stove
【医】 furnace
翻译例句
1. 讨论了两流薄板坯连铸连轧作业时铸坯在加热炉内的运动情况。
The movement of slabs in reheating furnace from two-strand thin slab continuous caster operations is discussed.
2. 简要分析了石钢大方坯步进梁式加热炉的主要技术参数、工作原理、技术特点,介绍了该加热炉在石钢的应用情况。
The main technical parameters, work theory, technical features of walking-beam heating furnace for big square billet are analyzed simply, its utilization in Shi Steel introduced.
3. 在工业生产条件下测量了铸坯加热温度分布,工业试验确定了加热炉经济负荷运行区。
By the industrial experiment, the distribution of continuous casting billet preheating temperature is measured, and the economic load range of reheating furnace is established.
4. 按合金组份配制的原料用氧化铝坩埚在真空中频感应炉中熔键成方坯条,再轧制成丝坯,最后拉制成钎焊丝材。
The Starting material is melted and poured into the quadrate billets, then rolled out in wire rods, finally drawn into brazing wire.
5. 介绍采用转炉、l F炉精炼、小方坯连铸机、高速线材轧机生产工艺试制ML 08 A l冷镦钢的过程。
To introduce the trial production process of ML08Al cold heading steel adopting the process of converter steel-making, LF refining, billet continuous cast and high speed wire rod mill.
6. 连铸坯的断面和长度都加大,由此对加热炉区的附属设备提出了更新的要求,结合作者对推钢机和出钢机的开发和研制过程中的一些观点和想法对此进行了阐述。
Some views and concepts in the development of the steel pushers and steel dischargers are mainly presented in this paper, in combination with the author′s view points.
7. 连铸坯热送热装工艺分为热送装炉轧制和直接装炉轧制两种。
Hot delivery and hot charging technology of continuous casting slab includes two technologies: hot delivery and hot charging rolling, and direct charging rolling.
8. 准确掌握连铸坯热装温度对实施连续加热炉的优化加热控制具有十分重要的意义。
Controlling the hot charging temperature accurately has a very important significance for optimizing heating control.
9. 介绍了韶关钢铁股份有限公司三轧厂将连铸坯热送热装技术与蓄热式加热炉加热技术有机地结合,采用高温快轧工艺,不仅使企业实现了节能降耗,而且提高了生产率和产品质量。
The high temperature and quick rolling technology was applied based on the hot delivery and hot charging process combining with regenerative reheating technique in Shaoguan Iron and Steel co.WWw.wentiYi.com
10. 采用在底流式镁合金熔炼炉中施加不锈钢丝网过滤的方法在半连续铸造工艺中实现镁合金熔体净化,以达到提高镁合金锭坯质量的目的。
In order to improve the quality of magnesium billets, magnesium melt for DC casting was purified by using stainless steel mesh in the magnesium melting furnace with bottom apex.
11. 针对某公司环形加热炉的实际生产情况,建立了管坯加热过程的三维传热数学模型。
Considering practical ring shaped heating furnace of a certain company, a threedimensional heat transfer mathematic model for tube rounds heating process was established.
12. 从炼钢厂送过来的连铸坯,首先是进入加热炉,然后经过初轧机反复轧制之后,进入精轧机。
From the steel plant sent from the billet, first into the furnace, and then repeated after the beginning of rolling mill, into the finishing mill.
13. 结果表明,新型圆坯结晶器使用寿命达到322炉以上,远高于企业要求200炉以上的目标;
The results show that the working lifetime of novel round mould reaches to 322 heats, higher than the factory"s requirements and more than the lifetime of imported mould which reaches to 200 heats.
14. 介绍了天钢利用顶底复吹转炉、LF精炼炉、方坯连铸、高速线材轧机工艺生产ts06拉丝专用钢盘条的实践。
The practice of the process of top-bottom blowing converter-LF refining furnace-billet casting-high speed wire rod mill for producing special TS06 wire-drawing steel wire rod is briefly introduced.
15. 介绍了天钢利用顶底复吹转炉、LF精炼炉、方坯连铸、高速线材轧机工艺生产ts06拉丝专用钢盘条的实践。
The practice of the process of top-bottom blowing converter-LF refining furnace-billet casting-high speed wire rod mill for producing special TS06 wire-drawing steel wire rod is briefly introduced.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
