模块功耗用英语怎么说，模块功耗的英文翻译

词语导航

基本信息

词语：模块功耗

繁体：模塊功耗

拼音：mó kuài gōng hào

英语翻译

【计】 module dissipation

分词翻译

模块的英语翻译：

【计】 module
【化】 module

功耗的英语翻译：

【计】 power consumption; watt loss

翻译例句

1. 采用IR 2110作为该功率放大电路的驱动模块，构成的整个驱动电路具有结构简单、驱动能力强、功耗低的特点。

The entire drive circuit has characteristics of sample construction, powerful drive energy and low consumed power by using IR2110 as the drive modular.

2. 较深的IGBT选型及功耗计算知识，功率模块热模型创建。

Deep IGBT selection and power loss calculation, power module thermal model knowledge.

3. 随着微型无人机、微纳卫星的出现，迫切需要功能更强、集成度更高、功耗更低的微型集成射频模块。

Future mini-aircrafts, such as Micro air Vehicle (MAV) and Nano-satellite, requires RF front-end modules with functional complexity, high density and low power consumption.

4. 蓝牙模块由于其功耗低、兼容性好、可靠性高和无连接线等优势而受到全世界的重视。

The blue tooth module as a result of its power loss low, the compatibility good, the reliability is high and superiority and so on connectionless line receives the world the value.

5. 在幸存路径管理模块采用门控时钟的方法，有效地降低了对幸存路径存储部分的功耗。

SMU module adopts the clock-gating method was applied to the survivor path storage block, reduce the survivor path storage memory power dissipation effectively.

6. 无线温度发射器采用低功耗cpu技术，控制数字温度传感器和无线发射模块协调工作。

Wireless temperature transmitter using low power consumption CPU control technology to control digital temperature sensor and wireless transmitting module.

7. 开展手机电视业务，手机必须添加调谐器、解调器、解码器等模块，接收和处理电视信号，对手机的体积和功耗提出了巨大挑战。

It puts new hardware requirements on the handset, requiring a tuner, a demodulator and an encoder to receive and process signals, which challenges the power consumption and size of handsets.

8. 每级子模块中采用了没有直流功耗的差分对动态比较器，具有更好的综合性能。

A differential pair dynamic comparator which has no DC power dissipation is used in SUB-ADC.

9. 在对系统各模块的结构和功能进行分析基础上，在测试模式下，对系统功能、功耗进行了仿真模拟。

Under each test mode, function and power consume of the chip is simulated, and the result is given out.

10. 为了实现低电压低功耗设计的要求，改进了调制器结构，并进行了从系统到电路模块的优化。

The low voltage and low power target is attained by improving the modulator structure and optimizing from system to circuit blocks.

11. 有加热功能低功耗双模块集成湿度敏感芯片及其制作方法，涉及到一种传感器芯片及其制作方法。

Disclosed is a dual module integrated humidity sensitive chip with heating function and low power consumption as well as a making method thereof, relating to a sensor chip and a making method.

12. 该方法在时间和面积约束下，通过高层次调度和模块分配，对可测性和低功耗问题进行研究。

Under time and area constraint, this method studies the testability and low power by way of high-level scheduling and module allocating.

13. 本文设计了以超低功耗单片机MSP430F149为核心，结合外围传感器和无线收发模块的传感器网络节点。

In this paper, a design of wireless sensor network node based on low power singlechip MSP430F149 is introduced. The node is consist of MSP430F149, sensors, wireless communication module and batteries.

14. 结果表明，所设计的直流开关型变换器集成模块输出电压稳定、纹波小、工作频率，高、功耗低，且体积小。

It has been shown that the designed DC switching mode converter has a stable output voltage frequency, small ripple, high operating frequency and low power consumption.

15. 主控器采用目前国际上功耗最低的MSP430FW 427单片机，该单片机能够利用内部流量扫描模块（SCANIF）有效地转换振荡波形，不需要外部流量检测IC，提高测量的精度和灵敏度。

The MSP430FW427 is used as control MCU. The function is realized by the SCAN IF module without IC circuit external, which improves the precision and sensitivity of flow measurement.

16. 低功耗模块，降低系统功耗，延长设备使用周期。

Low-power module reduce system power consumption, extend equipment life cycle.

17. 采集的数据通过基于手机网络的无线传输模块上传到服务器。本文主要介绍了设计过程中采取的降低功耗的措施。

The data collected is uploaded to the server by wireless transmission module based on mobile networks, and the system is set in the field.

18. 异步电路在速度、功耗、噪声、模块化等方面具有其独特的优势。

The asynchronous circuits have the particular advantages in speed, power, noise, modularity and so on.

19. 驾驶室主控模块可以随时主动查询轮胎检测模块的工作状态，低成本、低功耗、更加稳定可靠。

The main control module of the cab can automatically inquire the working status of the tire detection module at any time, thereby reducing the lost and power consumption and prompting the reliability.

20. 对安装在轴承座内的数据采集模块在硬件和软件上进行了低功耗设计，使其能长期安全地运行。

The data acquisition module installed in the bearing block is designed in a low-power way both in the hardware and software.

21. 在上述理论分析的基础上，分别设计了三种不同结构的低功耗电源恢复电路和解调电路以及参考电压源电路等电路模块。

Thirdly, according to the design techniques mentioned above, three kinds of Low-Power rectifier, demodulator and other circuits, such as bias circuits, POR generator, etc. are put forward.

22. 基于低功耗设计考虑，调制器采用有源-无源混合型环路滤波器，并通过离散时间微分技术移除信号求和模块。

Upon the low power design consideration, a hybrid active-passive loop filter is employed and the signal summing block is removed by using discrete-time differentiation technique.wwW.wEntIYi.cOM

23. 而由于引入了射频芯片，该系统还具有低功耗、模块化、易扩展、硬件物理空间占用小等优点，具有一定的实际工程应用价值。

Using the RF chip, the proposed system is also characterized by fast develop period, low cost and small physical space, whose hardware structure is easy to be upgraded.

24. 液晶显示模块具有功耗低、体积小、超薄等特点。

LCD has low power dissipation, small volume, and is ultrathin.

25. 本次课题研究能够用于白光LED驱动的电源管理方式，并设计其主要的模拟电路模块，为实现低功耗、低成本的LED驱动器提供技术参考。

The purpose of this task study a new power management way used to drive white LED luminescence, and design the general analog circuits"module.

26. 本次课题研究能够用于白光LED驱动的电源管理方式，并设计其主要的模拟电路模块，为实现低功耗、低成本的LED驱动器提供技术参考。

The purpose of this task study a new power management way used to drive white LED luminescence, and design the general analog circuits"module.