
词语导航
基本信息
词语:熔化液
繁体:熔化液
拼音:róng huà yè
英语翻译
【机】 melt
分词翻译
熔化的英语翻译:
flux; fuse; melt; melt down
【计】 fusing
【化】 fusion; melting
【医】 fuse; fusion; fusional; lyse; lysis; lyso-; lyze
液的英语翻译:
fluid; liquid; succus
【化】 liquor
【医】 Fl.; fld.; Fluid; humor; juice; Liq.; sap; succi; succus
翻译例句
1. 对定向凝固区域熔化液态金属冷却法的固液界面前沿温度梯度进行了测定。
The temperature gradient in front of S/L interface was measured on Zone Melting Liquid Metal Cooling(ZMLMC) directional solidification apparatus.
2. 根据旋弧弧根处熔化液池的受力分析,在理论上建立了能描述旋弧喷溅侵蚀特性的函数关系式。此理论关系表明,在无外磁场作用下,液池中心受力最大,将形成中心喷溅;
According to the analysis of the applied forces on the molten poor at arc root the theoretical function in which the arc erosion of metal droplet ejection can be characterized was founded.
3. 水平连铸这道工序包括四个过程:电解铜板的熔化,铜液的凝固,管坯的牵引和管坯的切割。
Horizontal continuous casting procedure includes four processes: electrolysis copper plate melting, copper fluid solidification, the drawing and cutting of tube billet.
4. 对熔化器皿玻璃等的粘土质坩埚使用中的高温软化变形、玻璃液侵蚀、热震开裂等损毁机制进行了分析研究。
Mechanism of damage of clay pot for utensil glass melting, such as softening deformation at high temperature, corrosion by molten glass, crack by thermal shock, etc was studied.
5. 用数值模拟方法研究了工艺因素对硅铁在铁液中熔化过程的影响。
The effects of technical factors on melting process of ferrosilicon in liquid iron are studied by using numerical simulation.
6. 在此基础上进行了以电磁泵充型为技术核心辅之以合理的铝液熔化、净化工艺的坦克发动机缸盖铸造新工艺研究。
On these basis, we have studied the new casting technique of the tank"s engine top which poured by the electromagnetic pump associated with rational melting and purifying process.
7. 结果表明:硅铁浸入铁液至完全熔化分为两个时期,即铁壳期和熔化期;
Two separate periods are identified:the iron shell period and melting period, after immersion of ferrosilicon into liquid iron.
8. 采用等效比热法来确定液相分数,假定固液相等同区来解决工件熔化区与非熔化区的移动边界。wwW.WENtIYi.Com
Equivalent latent heat was adopted to determine liquid quantity and solid-liquid identity was adopted to solve moving interface between molten and solid region.
9. 采用密度测试法对从熔化到浇注过程的铝液精炼质量进行监控,对铝液精炼工艺的试验结果进行分析。
Density method are used to monitor and control the quality of aluminum liquid before cast, and the experimental result of aluminum alloys, refining technology are analyzed.
10. 讨论了正常熔化时间即断电前炉内状态对断电后钢液凝固和炉内温度变化的影响。
The effect of the initial state on the solidification process of liquid steel and the temperature changing inside furnace were discussed, respectively.
11. 该光放大用玻璃的制备方法是把原料加入坩埚中,进行熔化,得到玻璃液,加入铂坩埚中,再用光学玻璃熔制法使其熔融、澄清、均化。
The raw materials are added into a crucible for melting, then the obtained glass liquid is added into a platinum crucible for melting, clarifying and homogenizing by an optical glass fusion method.
12. 熔化部布置一对耳池,可以起到降低玻璃液速度,提高熔化,澄清的作用。
It will reduces the glass fluid speed, enhances the effect of homogenize and cooling when arranges a pair of auriculate baths at the melting end.
13. 本装置在使用中具有钢液在结晶器内分配均匀,熔化保护渣性能良好,制作工艺简单等特点。
The utility model has the advantages of equal distribution of molten steel in the crystallizer, good performance of melting protecting slag, simple preparing process, etc. in use.
14. 本装置在使用中具有钢液在结晶器内分配均匀,熔化保护渣性能良好,制作工艺简单等特点。
The utility model has the advantages of equal distribution of molten steel in the crystallizer, good performance of melting protecting slag, simple preparing process, etc. in use.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
