
词语导航
基本信息
词语:应力反射
繁体:應力反射
拼音:yīng lì fǎn shè
英语翻译
【医】 stress reflexion
分词翻译
应力的英语翻译:
stress
【化】 stress
【医】 stress
反射的英语翻译:
echo; flash; glint; reflect; return; reverberate; throw back
【计】 mirroring; reflection; reflew
【化】 reflection
【医】 jerk; reflect; reflection; reflex; reflexio; reflexion
翻译例句
1. 叙述铜反射镜的加工过程,提出“两面同时加工,自然释放应力”的加工方法。
The machining process of copper reflector is described. A processing method of "simultaneous processing of two sides and natural stress releasing" is put forth.
2. 本文主要给出了应力的反射系数和透射系数的计算公式。
This article mainly gives the formulas of the reflection coefficient and the transmission coefficient of the stress.
3. 本文介绍了应力波反射法中所使用的频域分析在判断桩身质量完整性中的优点与不足。
In this paper, we introduced the merit and shortage of the frequency analysis determining the integrality of stake - boby quantity using the reflect method of stress wave.
4. 应力波反射法在检测基桩质量的应用上存在着方法上的局限,且桩身缺陷的方向性对检测结果影响极大。
The stress - wave reflection method exist limitation in testing the quality of foundation pile. The direction of defects in pile body exerts a tremendous influence on testing results.
5. 用幂级数解法,理论上给出了该问题的级数解,同时考虑了应力波传播及反射对屈曲的影响。
The equation of lateral disturbance is used to analys the problem. The effects on the propagation and reflection of stress wave are taken into account.
6. 通过在一维应力波理论建立的传导理论,分析了波在楔型表面的反射和透射现象。
Through the conduction theory based on one dimension stress wave theory, the reflection and transmission phenomena of waves on the surface of the wedge have been analyzed.
7. 采用定点激光反射热循环方法,测量了硅基体上铜膜应力随温度的变化及等温松弛。
The stress variation with temperature and isothermal relaxation in copper films deposited onto silicon wafers are studied by fixed point laser reflection method.
8. 节理产状应力波反演时,关键问题在根据测试振动信号判断出节理面反射纵波初至时刻。
When stress wave is used to inverse joints attitude, the key problem is judge the initial arriving moment of reflected P-wave from the tested vibration signal.
9. 笔者对锚杆检测技术的历史进行了简单的总结,并详细、重点介绍了目前被广泛使用的应力波反射法。
This paper summarizes simply the history of bolt testing technique, describes in detail stress wave reflection method.
10. 采用有限单元法计算了反射镜坯体的热残余应力,通过对比验证了测试结果可靠性。
The thermal residual stress was calculated by the finite element method. Both testing and calculation data proved the reliability of testing data.
11. 针对充气膜结构反射面充气后的高精度抛物面形状要求,建立了理想状态形状模型和均匀应力分布模型。
Toward paraboloid shape demand of inflatable membrane structure after inflation, the ideal shape model and the uniform stress distribution model are established.
12. 首先,对反射裂缝尖端应力场的奇异性进行了描述,建立了平面断裂问题应力强度因子的有限单元解。
Firstly, after depicting the singularity of stress field at the top of crack, the finite element method to calculate stress intensity factor of plain fracture problems is founded.
13. 为了评价应力吸收防水粘结层(SAWI)的抗反射裂缝能力,对其进行了性能试验。
In order to evaluate the reflection crack resistance of stress-absorbing waterproof interlayer (SAWI), some performance tests were carried out.
14. 该井田煤镜质组反射率椭球体有限应变特征分析结果表明在煤系地层中,煤的最大镜质组反射率的方位除与区域构造应力场的作用有关外,还与其所处的局部构造位置有关。
The result indicated that the orientation of maximum vitrinite reflectance might be related with the local structural position of the sample in addition to the stress field of the regional tectonics.
15. 本文以高粘性沥青为结合料,主要对以下四方面内容进行了研究:首先,用有限元方法计算分析应力吸收层防治反射裂缝效果。
Based on high viscous asphalt, this paper mainly studied the following four topics: Firstly, FEM (finite element method) was used to analyze the effect of stress absorbing layer.
16. 分析了集中药室爆破时,爆破冲击波和应力波对药室附近岩体的破碎过程及应力波在自由面的反射作用。
The paper analysed the process of smashing rock near a explosion source by shock wave and stress wave and the reflecting action of stress wave on the free face.Www.WeNtIyI.cOM
17. 提出了混凝土结构中任意缺陷的应力波反射成像测试与诊断方法。
A stress wave reflection imaging (SWRI) method is presented to test and diagnose the complex defects in the concrete structure.
18. 在理想状态形状模型的基础上,提出了通过改变膜厚度方式改进反射面应力均匀度的方法,确定了最佳的反射面厚度变化规律。
Based on the ideal shape model, variable thickness method is used to improve the uniformity of stress distribution of reflector, and the best thickness variation is determined.
19. 同时,本文分析了位移波和应力波在固定端、自由端和弹性支承端的反射特点。
At the same time, the reflection characters of strain wave and displacement wave are analyzed at the fixed end, free end and elastic bearing end.
20. 考虑了沥青混合料的热粘弹特性,结合热传导理论,通过有限元数值模拟,研究在温度场作用下反射裂纹的应力场。
Based on theories of viscoelasticity and heat transfer, the stress field of reflective crack under the temperature field is studied by finite element simulation.
21. 通过对应力波反射法在混凝土灌注桩检测上的应用效果,并且根据反射波曲线的不同形状,从理论上和施工中进行分析、判读。
Throughthe application of reflection echo in concrete filling pile, the article analyzed different shape of reflection echo curve from theory to practice.
22. 其次自己动手制作了天线单元和整体的实物模型,按照前面计算出的结果对天线网面施加预应力,得到成型后的实物索网反射面天线。
Secondly real models of the mesh unit and the whole mesh antenna are created, then shaping stress according calculation result is pressed on, finally the shaped mesh reflector antenna is obtained.
23. SAF应力吸收层系统具有良好的抗反射裂缝能力,混合料密实、透水性小,可以减少路面水损坏的产生,用该结构可以有效解决旧路加铺时反射裂缝的产生。
SAF stress absorbing layer has very good ability to resist reflective cracks. Because of its air-free and little water permeability, it can decrease the damage caused by water in the pavement.
24. 冲击设备(7)向波导(21)提供撞击脉冲,在波导中产生压缩应力波和反射的拉伸应力波,应力波在波导中传播。
A percussion device (7) gives impact pulses to a waveguide (21), where a compression stress wave and a reflected tensile stress wave are generated, which propagate in the waveguide.
25. 反射裂缝裂尖位于面层中且裂缝长度大于某一值时,应力强度因子随着摩擦系数的增加而减小。
The SIF decreases with the friction coefficient rising when the surface crack tip lies in the base and the reflective crack length is more than a certain value.
26. 得出了含表面裂缝和反射裂缝路面体的应力强度因子均随着裂缝长度的增加逐渐增大。
It is obtained that the SIF increases with the length of the surface crack or the reflective crack enlarging in the asphalt pavement.
27. 介绍了一种基于多光束原理的薄膜应力测试方法,通过对反射光光点间距变化的检测,可以实时得到应力的信息。
A new method based on multi - beam to measure the stress of optical thin film is introduced the stress can be obtained by measuring the relative distances between the reflected light spots.
28. 采用反射光弹技术考察了编织复合材料的孔边应力集中现象,得到了有益的结果。
The photoelastic coating method is used to study the phenomenon of stress concentration around the hole in the 3D braiding composite materials. Some results are obtained.
29. 对路面突然降温时的温度场进行了数值模拟,计算了温度应力作用下反射裂缝尖端的拉应力、应力强度因子,并对其进行了参数分析。
Crack top"s tension stress and stress intensity factor caused by thermal stress were computed, structural parameters" sensitivity analysis were made as well.
30. 对路面突然降温时的温度场进行了数值模拟,计算了温度应力作用下反射裂缝尖端的拉应力、应力强度因子,并对其进行了参数分析。
Crack top"s tension stress and stress intensity factor caused by thermal stress were computed, structural parameters" sensitivity analysis were made as well.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
