
词语导航
基本信息
词语:低温聚合
繁体:低溫聚合
拼音:dī wēn jù hé
英语翻译
【化】 low temperature polymerization
分词翻译
低温的英语翻译:
low temperature; microtherm
【化】 subzero
【医】 hypothermia; hypothermy
聚合的英语翻译:
aggregation; converge; group; polymerization
【化】 polymerization
【医】 polymerism; polymerization; polymerize
翻译例句
1. 压克力板工业化试验结果表明,复合引发剂和高低温聚合工艺用于工业化生产是可行的。
Results of industrialized tests of the sheets revealed that composite initiator and polymerization technology at the stage of high and low temperatures used for industrialized production was feasible.WWW.wENtiYI.COM
2. 当在低温下进行乳液聚合时需要加入抗冻剂。
Antifreeze agents are necessary in emulsion polymerizations carried out at low temperatures.
3. 由于重量轻、耐腐蚀、容易在较低温度下加工并且通常较便宜,聚合物是很有用的。
Polymers are useful because they are lightweight, corrosion resistant, easy to process at low temperatures and generally inexpensive.
4. 硬弹性材料是结晶或非结晶聚合物在特定的条件下加工而形成的,这类材料表现出高弹性、高模量和突出的低温弹性。
Hard elastic materials are a class of crystalline or non-crystalline polymers produced under special processing conditions, which show high modulus and high elasticity under very low temperature.
5. 通过低温等离子聚合的方法,以丙烯酸为单体在钛表面沉积含有羧基的薄膜,以羧基为接入点固定纤维连接蛋白。
The main objective of this paper is to deposit a polymer nano-film containing functional group (carboxyl or amido) on titanium surface through low temperature plasma polymerization technology.
6. 采用低温等离子体辉光放电技术,用含氟有机单体在硅太阳电池表面聚合成膜。
This paper describes the polymerization of monomer containing fluorine by the low-temperature plasma glow discharge to produce the antireflective films which deposited on textured solar cells.
7. 本文的目的是建立起低温乳聚丁苯橡胶聚合单元的稳态模拟平台,并在此基础上对生产装置进行优化计算。
The aim of this paper is to build the steady state simulation platform of the low temperature styrene/butadiene emulsion polymerization unit.
8. 用压力热聚合方法代替低温催化聚合生产浅色号c 9石油树脂。
C9 aromatic petroleum resin was produced with pressure thermal polymerization instead of the catalytic polymerization under low temperature.
9. 采用核壳乳液聚合的方法制备低温自交联的无甲醛涂料印花粘合剂。
Low temperature self-cross-linking formaldehyde-free binder for pigment printing is prepared by means of core-shell emulsion polymerization.
10. 研究了以歧化松香酸钾皂作为主乳化剂时,对低温乳液聚合丁苯橡胶的聚合及胶乳稳定性的影响。
The effects of disproportionated potassium rosinate on the polymerization of cold ESBR and the stability of the latex were studied.
11. 目的:利用低温等离子体轰击法建立高分子聚合体表面润湿性研究模型。
AIM: To establish a model of polymer surface wettability by oxygen plasma treatment.
12. 在压力不变的情况下,在高温下的聚合物的密度比在低温下的要低得多。
AT high temperATures, the density of a polymer is considerably lower than AT room temperATure, provided the pressure is the same.
13. 论述了几种氟聚合物涂料,如水性氟聚合物涂料、粉末氟聚合物涂料和低温或常温固化氟聚合物涂料的开发动向。
The developing trends of fluoropolymer coatings, such as water soluble fluoropolymer coatings powder fluoropolymer coatings and low or room temperature curable fluoropolymer coatings.
14. 简要介绍了该聚合物合金的加工过程,其主要工艺是通过低温固相挤出和反应挤出制备。
The processing technology of this polymer alloy is briefly introduced. This polymer alloy is prepared by low temperature solid-state extrusion and reactive extrusion.
15. 通过控制辐射功率、辐射时间而控制聚合为低温固相聚合。
Solid state polymerization can be controlled in low temperature by controlling time and power of radiation.
16. 聚合物用作改性剂可以提高沥青的软化点,改善沥青的低温柔韧性,提高延度,使沥青产生可逆的弹性变形。
The polymer modifier can improve the performance of the paving asphalt on flexibility at low temperature and reversible elastic deformation.
17. 结论:TWBC能加速低温心肌保护中细胞TB聚合,有利于再灌注早期心功能恢复。
Conclusion: TWBC accelerates the repolymerization of myocardial TB during hypothermic CPB, which may mediate the improved cardiac performance in the early stage of myocardial reperfusion.
18. 结论:TWBC能加速低温心肌保护中细胞TB聚合,有利于再灌注早期心功能恢复。
Conclusion: TWBC accelerates the repolymerization of myocardial TB during hypothermic CPB, which may mediate the improved cardiac performance in the early stage of myocardial reperfusion.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
