回弹的用英语怎么说,回弹的的英文翻译


词语导航

基本信息

词语:回弹的

繁体:回彈的

拼音:huí dàn de

英语翻译

【医】 resilient

分词翻译

回弹的英语翻译:

【化】 resilience; springback
【医】 rebound; resilience

翻译例句

1. 伴随这种回弹的振动就是地震。

The vibrations accompanying the rebound are the earth quake .

2. 伴随这种回弹的振动就是地震。

The vibrations accompanying the rebound are the earth quake.

3. 但过分使用喷雾将引起回弹的充血,使得鼻炎更糟糕。

But using a spray too often can cause rebound congestion, making sinus problems worse.

4. 论述了加载和卸载路径对弯曲回弹的影响机理。

To control loading and unloading path is a good way to decrease spring-back.

5. 回弹的数值模拟计算采用显、隐式结合的方法。

Springback is numerically simulated using combination method of the explicit and implicit FEM.

6. 从理论上分析了翻边的变形机理及翻边回弹的原因。

The flanging deformation mechanism and its springback reason was theoretically analyzed.

7. 虽然今年经济有回弹的趋势,BNDES的贷款却一直急速的增长。

Even though the economy has rebounded this year, BNDES loans have continued to rise sharply.

8. 近年来,有限元数值模拟技术已成为预测回弹的重要手段。

In recent years, Numerical simulation technology has become an important means to spring-back prediction.

9. 变压边力策略是在冲压件成型中控制回弹的一种有效措施。

The strategy of variable blank holding force is an effective measure for the springback control in sheet metal forming processes.

10. 木材弯曲后,控制木材的含水率是降低回弹的一个重要方面。

Controlling moisture content is one of the most important aspects to debasing reversion after bending.

11. 介绍了汽车玻璃落模弯曲成形中回弹的机制,建立了有限元模型。

The spring-back mechanism in the drop bend-forming of automotive glass is introduced, and the finite element model is established.

12. 传统理论在分析回弹时,没有考虑应变中性层内移对回弹的影响。

Traditional theory has not considered the influence of the neutral layer inside displacement on bending springback when analyzing the springback.

13. 从弯曲模结构设计角度,阐述了生产中常用减小回弹的方法和技巧。

In this paper, the techniques about decreasing rebound in die manufacturing are described from the point of structural design.

14. 该方法简便,与实际接近,适用于汽车车身大型覆盖件回弹的计算。

In is concluded that this calculation method is simple and convenient, closed to the actualities and suitable for calculating the resilient deformation in large-sized covering stampings.

15. 周边和市场大幅反弹带动,那么市场前景仍表现在围绕市场高回弹的依赖。

Peripheral and the sharp rebound in market-driven, then the market outlook remains dependent on a high rebound in the markets around performance.

16. 回弹一直是影响型材拉弯成形质量的重要因素,影响拉弯回弹的因素很多。Www.WenTiYi.cOm

Springback is one of the important factors that influence the forming quality of blanks. Many parameters influence the springback.

17. 在制定大型复杂弯曲件工艺时,运用该研究结果可以解决弯曲回弹的问题。

When law down the technology on the complicated large bending parts, we utilize this research result to resolve the return bounce on bend.

18. 通过对V形弯曲回弹的讨论,建立一个V形弯曲回弹调节的试验模具模型。

V bending springback adjusting test model was set up by discussing the bending springback.

19. 另外,本文基于实验定性地分析了侧压力对型材截面应力和回弹的影响规律。

What"s more, the rules of the Lateral compression effect on Angle section extrusion"s stress distributing and springback are analyzed qualitatively based on experiments.

20. 坐在车座上,把上身的力量集中在横把上,利用叉子回弹的合力使前轮离地。

Stay seated; utilize a combination of the forks rebound, upper body strength and power on the cranks to loft the front of your bike in the air.

21. 模具补偿是矫正复杂曲面冲压件回弹的有效方法,但它需要正确的回弹评价指导修模。

Mould compensation is an effective way to rectify the springback of complex surface sheet metal stamping, it needed an accurate springback evaluation to direct modifying die surfaces.

22. 该方法实现了对冲压件各个部分回弹的精确评测,从而可以为模具的修整提供正确的指导。

The method has realized the accurate estimation of each part of stamping part, and it can offer correct guidance for the amendment of the mould.

23. 通过对模拟结果的分析,研究了硬化指数、弯曲半径、材料厚度等因素对回弹的影响规律。

By analyzing the simulation results, how the hardening parameter, bend radius parameter and thickness parameter influence springback is studied.

24. 基于管弯曲回弹有限元模拟模型研究了弯曲工艺参数和材料参数对管弯曲回弹的影响规律。

Based on the tube bending FEM simulation model, the tube bending springback rule under the different craft parameters and the material parameters was studied.

25. 最后,研究了回弹的原因和介绍了使用JSTAMP对车身底座横梁板执行回弹补偿的过程。

Lastly, a research for springback reason and a compensation for tool surface of underbody cross member panel were performed using JSTAMP.

26. 结果表明,板材的初始条件、板材热成形时的温度场变化和相变行为是影响回弹的主要因素;

The results show that the initial conditions, temperature field change during thermal forming and phase deformation are the main factors affecting the rebound.

27. 英国环境部门授权了两项工作,用以测定在国家经济中这些直接回弹与间接回弹的可能出现的程度。

Britain"s environment department commissioned two pieces of work that attempted to gauge the likely size of both the direct and indirect rebound effects across the economy.

28. 为解决级进模具使用的带料上的局部折弯回弹的精度问题,本文建立了折弯变形区的过压量模拟模型。

In order to acquire the local bending spring-back accuracy of sheet metal strip of a progressive die design, the thesis aims to build ironing depth simulation model in a bending deformation zone.

29. 为解决级进模具使用的带料上的局部折弯回弹的精度问题,本文建立了折弯变形区的过压量模拟模型。

In order to acquire the local bending spring-back accuracy of sheet metal strip of a progressive die design, the thesis aims to build ironing depth simulation model in a bending deformation zone.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!