丙烯酸橡胶用英语怎么说,丙烯酸橡胶的英文翻译


词语导航

基本信息

词语:丙烯酸橡胶

繁体:丙烯酸橡膠

拼音:bǐng xī suān xiàng jiāo

英语翻译

【机】 acrylic rubber

分词翻译

丙烯酸的英语翻译:

【化】 acroleic acid; acrylic acid; propenoic acid
【医】 acrylic acid

橡胶的英语翻译:

balata; rubber
【化】 rubber
【医】 gum-elastic; rubber
【经】 rubber

翻译例句

1. 研究了硫化剂TCY对丙烯酸酯橡胶(ACM)的硫化特性。

The vulcanization behavior of acrylate rubber(ACM) cured with trithiocyanuric acid(TCY) was investigated.

2. 报道了将丙烯酸单体接枝到合成橡胶上的接枝共聚方法。

A newly developed grafting copolymer of synthetic rubber with acrylic monomer has been reported.WwW.WentiyI.coM

3. 介绍2,3-二氯丁二烯一甲基丙烯酸甲酯共聚物的合成,以及以该共聚物为主体材料的橡胶同金属热硫化粘结的胶粘剂。

The synthesis of 2,3- DCB /MMA Copolymer and preparation of the adhesive for bonding rubber to metal with the copolymer above as the main material are introduced.

4. 其中改性沥青材料有:沥青环氧粉未涂料、沥青丙烯酸树脂涂料、沥青橡胶防水胶带、沥青聚酯防水油毡、沥青-乙烯醋酸乙烯-石蜡热熔粘接剂等。

The modified asphalt includes; asphalt epoxy powder coating, asphalt acrylic acid resin coating, asphalt polyester wate proofing belt, asphalt-vinylacetic acid vinyl-wax fusion bond agent etc.

5. 通过硫化曲线评定,选用苯甲酸铵作硫化剂对环氧型丙烯酸酯橡胶低温胶进行硫化。

Through vulcanization curves evaluation ammonium benzoate was selected as the vulcanizing agent of epoxy acrylate rubber (EACM).

6. 研究了含环氧基团丙烯酸酯液体橡胶对环氧树脂三乙醇胺固化体系的增韧作用。

Toughening of epoxy resin by modification with acrylate liquid rubber containing pendant epoxy groups was investigated.

7. 以丙烯酸酯橡胶(acm)和三元乙丙橡胶(EPDM)为主要原料制备共混材料。

The blend of acrylate rubber (ACM) and ethylene propylene diene terpolymer (EPDM) was prepared.

8. 以SBS和SIS为基材,采用不同橡胶胶种、丙烯酸及其酯类单体进行接枝共聚合成胶粘剂。

This paper mainly studies to synthesize adhesive by graft modification of SBS/SIS block copolymer with rubber or acrylic acid and acrylic ester.

9. 通过氧化锌与甲基丙烯酸或丙烯酸的中和反应,在丁腈橡胶(NBR)中原位生成了甲基丙烯酸锌或丙烯酸锌,研究了过氧化物硫化NBR的力学性能和交联结构。

The in-situ preparation of zinc methylacrylate or zinc acrylate through mixing zinc oxide(ZnO) and methylacrylic acid (MAA)or acrylic acid(AA) in NBR rubber vulcanized with peroxide was studied.

10. 综述了反应性丙烯酸酯液体橡胶的合成方法及其用丙烯酸酯液体橡胶增韧环氧树脂的研究进展。

The recent developments for the synthesis of reactive acrylate liquid rubber and the toughening of epoxy resin with acrylate liquid rubber were reviewed in this paper.

11. 氯丁橡胶(CR)、甲基丙烯酸甲酯(MMA)和丙烯酸(AA)在低毒溶剂中接枝成胶。

The chloroprene rubber(CR) combined with methyl methylallate(MMA) and allenoic acid(AA) to obtain graft adhesive in low poisonous solvent.

12. 是日本透杯公司生产的丙烯酸酯橡胶的商品名称。

Toa Acron is the brand name of producing ACM in Tope Company Japan.

13. MBS是由丁苯橡胶与甲基丙烯酸甲酯经乳液聚合而得的接技聚合物。

MBS is graft polymers prepared by polymerization of MMA in presence of PBD-styrene rubber emulsion.

14. 本文对4种丙烯酸酯橡胶的物理性能进行了比较,为丙烯酸酯橡胶的合理选用提供了依据。

Some physical properties of 4 styles of ACM rubber have been compared in this paper, which will providing some advice on choosing proper ACM rubber styles.

15. 拉伸实验结果表明随硬组分甲基丙烯酸甲酯含量的增加,抗拉强度增加,材料由橡胶向脆性塑性转变;

The results of tension tests show that the tensile strength increases and the materials are converted from a rubber to a plastics as the contents of PA increase.

16. 采用序列法制备氢化丁腈橡胶(HNBR)/聚甲基丙烯酸酯互穿聚合物网络(IPN)阻尼材料。

Abstract :Sequential interpenetrating polymer networks(IPNs) based on hydrogenated nitrile rubber(HNBR) and various polyalkyl methacrylates were synthesized.

17. 叙述了氯丁橡胶与甲基丙烯酸甲酯接枝聚合的反应原理,胶粘剂溶液的配方以及制造工艺操作过程。

It relates to reaction principle of cr with methyl-acrylate graft polymerization, formulation of adhesive solution and manufacturing technology.

18. 结果表明,废尼龙短纤维能较好地分散在丙烯酸酯橡胶中;

The results showed that waste nylon short fiber was finely dispersed in ACM;

19. 结果表明,废尼龙短纤维能较好地分散在丙烯酸酯橡胶中;

The results showed that waste nylon short fiber was finely dispersed in ACM;

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!